Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Installed a Phenom II x4 965 - getting program crashes and problems

09 Jan 2013   #1
hypernexus

windos 7 64bit
 
 
Installed a Phenom II x4 965 - getting program crashes and problems

Hi everyone.

Not sure if my spec will show up under this post. If not, will upload on response.

Bottom line,I have just installed a new AMD Phenom II x4 965 3.4ghz quad(it's showing 4ghz on core temp) Black Edition, upgraded from my Athlon 64 x2 chip. I have an am2+ mobo, that was flashed for am3 by previous user for his 6 core.

The installation was correct, no problem booting etc, temperatures all good, but I am getting constant crashes on programs that were absolutely fine yesterday and from before. Even firefox crashes, but mainly a few games like Prince of Persia and Warframe as examples. Both of these games run absolutely fine before the new install.

I did a SiSandra check, and it came up at the end of the spec saying ' FSB exceeds Chipset rated speed - reduce FSB', 'memory hole may not be required-check bios settings' 'tpm not detected'. Sisandra also did not recognise the Phenom, still listing the athlon?

Now, the only thing that springs to mind is that, as this is a Black edition, it may be already in overclock - the specs are showing it as a 4ghz whereas as standard it should a 3.4ghz. I have not manually overclocked it, but could it have done this because the mobo has flashed bios for a 6 core or something?

If anyone could help, it would be great, as it was running perfectly stable before the new cpu was installed.

Thanks

Quick spec: ASrock mobo am2+(flashed to am3); Phenom ii x4 965BE; Arctic Freezer fan; ocz 750w psu;130gb hdd; Nvidia Geforce GT240;6 gb ddr2 cosrair ram


My System SpecsSystem Spec
.
09 Jan 2013   #2
Dwarf

Windows 8.1 Pro RTM x64
 
 

Hi hypernexus and welcome to W7 Forums

Reset the BIOS to its defaults by removing the motherboard battery and/or using the appropriate motherboard jumper (see manual for details). Replace the battery and remove the jumper (if you used the jumper method) and enter the BIOS when you reboot. Is everything recognised, bearing in mind that any settings adjustments you previously made (e.g. overclocking) will be reset to their defaults. Leave these settings as they are (but reset your date/time so that they are correct), save settings and reboot.

Run it at those settings for a while, and see if it is now stable. Any problems, please pop back.
My System SpecsSystem Spec
09 Jan 2013   #3
hypernexus

windos 7 64bit
 
 



Mobo battery trick worked. Cpu showing 3.4 in all spec thingies.

No crashes as of yet. Played 15 mins of Prince of Persia (the 'crash within 30secs' game) with no probs.

Thank you very much mate.

Fingers crossed that's all it'll take. I'll keep an eye on the cpu.

Cheers
My System SpecsSystem Spec
.

10 Jan 2013   #4
Dwarf

Windows 8.1 Pro RTM x64
 
 

You're welcome.

Leave it running at stock settings for a while to make sure everything is working correctly and then, if you wish, begin overclocking but do it carefully. The Black editions of AMD processors are the direct counterpart of the K-series of Intel CPUs, in that they are unlocked which allows for easy overclocking. My guess is that you overclocked your previous CPU and then just dropped the current one in, expecting that it would be able to cope (which, in theory, it might have done). However, CPUs do have a limit and it could well be that the previous settings that you had took it over that limit. In most systems, where Cool'n'Quiet or SpeedStep are enabled, you only notice the problems when running CPU-intensive applications, such as games.
My System SpecsSystem Spec
10 Jan 2013   #5
hypernexus

windos 7 64bit
 
 

I think that's what happened (previous overclock), although it wasn't me who overclocked it, so I didn't realise it was overclocked.

What you say about cool n quiet etc is probably bang on as I mainly had problems with games.

I'll be leaving it default for a long time, don't want to push it. It's already given me a nice spike fps on games like hawken which was very rough before and now is nice and smooth at higher settings than before.

Thanks.
My System SpecsSystem Spec
Reply

 Installed a Phenom II x4 965 - getting program crashes and problems




Thread Tools





Similar help and support threads
Thread Forum
Program installed in Program Files requires elevation?
I have a program that wanted to install in a document folder :mad: I have installed it in Program Files, but it requires elevation or it produces errors when running. I know I can tick the Run As ... box in the shortcut, but is there a better way, such as taking ownership of the install folder?
System Security
Can't run installed program within Program Files (x86)
Am not sure if this is the right place to ask for this problem, let me know. I gave a try to the Setup Project of VStudio 2008 to create and distribute an x86 installer of a program I develop in win7. After installing, uninstalling and executing over and over some of the features of my...
Software
Can I move an installed program?
There are a few occasions I really would have use for a program that could move an already installed piece of software to another location. For this instance i'm going to use starcraft 2 that i now would like to move over to an SSD hard drive since there's a lot of loading in-game i would like...
Software
Error: Another program is being installed
hey friends, i was trying to uninstall nokia pc suite but the process dd not finish and now everytime am trying to install the pc suite again am receiving this error 'another program is being installed. Please wait until that installation is complete, and then try installing this software again....
Software
installed pre-W 7 program having access problems
PaintShop Pro 9.1 is an older photo program I am very attached to. I installed it in W 7 using my default user account which has administrator powers. It starts up and runs fine (W 7 automatically removes the aero desktop to run it). It installed in the default c:\Program Files (x86) folder. I...
Software
I Installed Windows 7, and then... it crashes!
Ok, am not that smart when it comes to computers, but I installed Windows 7 32bit on my Acer laptop, which is only about a year old. It runs fine for about two days, and then.... IT CRASHES! It starts by running EXTREMELY slow, and then I restart it, and it wants to do a startup repair, and the...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:57.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App