Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: help with new mother board!!!!!!!

17 Jan 2013   #11
Quadrider10

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by TVeblen View Post
Then I'm with Bassfisher. Double and triple check your connections. Those tiny connectors on the ribbon cables need to snap positively into the sockets. I always feel like I'm going to break something because you have to push so hard to get them to go.
Already did. All are in place. There's only 3 connections.


My System SpecsSystem Spec
.
17 Jan 2013   #12
Quadrider10

Windows 7 Professional x64
 
 

Should I try my stock board again?
My System SpecsSystem Spec
17 Jan 2013   #13
TVeblen

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

Depends. Why were you replacing it?
My System SpecsSystem Spec
.

17 Jan 2013   #14
Quadrider10

Windows 7 Professional x64
 
 

I wanted the better graphics car that came with it lol
My System SpecsSystem Spec
17 Jan 2013   #15
TVeblen

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

That is funny. (In an unfunny way)

Could it be that Windows is choking on the new graphics because it is trying to load the old driver?
How does the BIOS screen look? Normal?
My System SpecsSystem Spec
17 Jan 2013   #16
TVeblen

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

Are you using your old CPU heatsink & fan, or is it one that came with the board?
If old, did you properly seat the CPU, use thermal paste, and properly seat the heatsink and fan?
My System SpecsSystem Spec
17 Jan 2013   #17
Quadrider10

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by TVeblen View Post
Are you using your old CPU heatsink & fan, or is it one that came with the board?
If old, did you properly seat the CPU, use thermal paste, and properly seat the heatsink and fan?
My old one... yes and yes and yes. I'm just worried about the screen for now.... after I can see the screen, I can figure out what the CPU is doing
My System SpecsSystem Spec
17 Jan 2013   #18
Quadrider10

Windows 7 Professional x64
 
 

Ok so problem with screen is the one wire strand that I'm assuming to be the power wires. Weather there plug in or out it makes no difference. So ima try my stock board again.
My System SpecsSystem Spec
17 Jan 2013   #19
smarteyeball

 
 

Quote   Quote: Originally Posted by Quadrider10 View Post
Ok so problem with screen is the one wire strand that I'm assuming to be the power wires.
So you have a loose wire/bundle? And you don't know for sure if it's the screens power connection?

Quote:
Weather there plug in or out it makes no difference.
And it doesn't matter whether or not if it's plugged in because it's still failing regardless?


Do you have an external screen you can use?
My System SpecsSystem Spec
17 Jan 2013   #20
Quadrider10

Windows 7 Professional x64
 
 

I flashed the new BIOS and it did nothing with the CPU and screen. So I'm betting that the board is messed up. Ima swap mine out cause I need a computer and exchange this one. So here's my situation tho. I have 512mb 500/700mhz at I card. The one I want is 1gb 675/800mhz. I'm planning on ocing it too. But do you think that's worth the time and money of exchanging it ans getting née one or just get money back?
My System SpecsSystem Spec
Reply

 help with new mother board!!!!!!!




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
will my AMD cpu work with this mother board.
hello i dont know much about amd cpu.. but i have a amd cpu its a AMD Athlon 2 ADX2600CK23GM, will this CPU work with this mother board?? MSI 970 Gaming AM3+ AMD 970 SATA 6Gb/s USB 3.0 ATX AMD Motherboard - Newegg.com if not what motherboard would.. thank you so much in advance..
PC Custom Builds and Overclocking
Which Mother Board is better?
I have a Compaq Presario CQ5210f with a M2N68-LA (Narra6) motherboard and I also have a old Compaq Presario SR1010NX with a MS-6577 (Giovani, Giovani2) mother board and it seems like the second mother board is better than the first. I would like to know which one is better because I have both...
Hardware & Devices
Replacing mother board
I have Win7 Home Premium. I need to replace the motherboard. Will I have to go thru Microsoft to re-register my OS? I initially used the Win7 32 bit upgrade version. Thanks for any advise.
General Discussion
Upgrading mother board, Cpu and Ram
Hi guys, As you can see from my system spec I am currently running a old sock A mo/bo and cpu, my win-7 32bit O/S is installed and runs ok (a bit slow but stable) However, I have just treated myself to some new parts which are, Asus M4A785TD-V EVO Socket AM3 mo/bo, AMD Phenom II X4 955...
General Discussion
mother board drivers
can anyone find me the driver for ma motherboard(vga driver).i am using P5GC-MX/1333
Drivers
what mother board do you have?
I have a nice Asus P5b-VM here is a pic well actully three pics;)
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 06:15.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App