Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Raid set up Questions - How do i set up a raid with 2 SSD's

01 Feb 2013   #11

Windows 7 Ultimate x64 SP1

Quote   Quote: Originally Posted by JRockZ View Post
Ok so one more question, if i set up a Jbod (on another PC) with an SSD drive and an IDE drive i assume i will only have the read and write speed of the slower drive correct?
You would be killing the purpose of having an SSD. If this was my system, I'd put a little bit of cash together and get a 128 GB SSD. They are very cheap now, and would even double the amount of space you are potentially looking at...aside from being faster as well.

My System SpecsSystem Spec


 Raid set up Questions - How do i set up a raid with 2 SSD's

Thread Tools

Similar help and support threads
Thread Forum
RAID - deleted RAID array, Windows 7 ok but I have questions
Hi all, My RAID 1 (I think? I have two equal drives that are mirrored) array was causing me a lot of pain. It kept freezing up my system and having me to had to rebuild the RAID too often. After a number of tests and browsing info online, I've decided that the RAID was the culprit of the freezing...
Hardware & Devices
Win 7 raid 0 setup / missing raid controller driver
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when...
RAID 5 switched from single storage to raid 5, lost drive letter
I am running 7 pro 64bit on a ASUS p8p67 deluxe mobo and I copied all data from my 1tb storage D: drive to a backup external and proceded to install raid 5 with 3 single 1tb drives and the raid is up an running. However using Intel Rapid Storage Technology to setup the raid inside windows I had to...
General Discussion
Upgrade MB and convert to Raid 0 Questions
I just bought a new motherboard with usb 3.0 and a faster FSB and two new 1.5 TB 7200RPM 6.0 SATA hard drives. What I am planning on doing is creating a fresh image of my hard drive. Then I will replace the mb and hard drive with newer ones, create a RAID 0, install windows onto the array, and the...
General Discussion
Raid 0 to SSD questions
Hey guys! Happy new year! I was wondering what would be the best way to go from a 1tb raid 0 to a 128gb samsung SSD? Im a little confused on what to do so im looking for a little help to point me in the right direction. Currently im using 1tb raid 0 HDD and decided to upgrade to a Samsung...
Installation & Setup
Windows 7 System Image - Restore Non-RAID to RAID 0+1
I created a windows system image with the backup and restore utility built into win7. This windows install is on a single hard drive. I built and onboard RAID 0+1 array and used the windows 7 install disk to restore the image on to the new RAID volume. Windows starts to boot up but the screen goes...
Backup and Restore

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:37.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App