Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Which ram memory should I buy for my mother EX58-UD3R

31 Jan 2013   #1
casiopea

windows 7 ultimate x64
 
 
Which ram memory should I buy for my mother EX58-UD3R

Hi, I have a PC with a mother EX58-UD3R
now I have installed two ram memories GSKILL RIPJAWAR DDR3 12800CL9D 4GB each.
I would like to add some ram to my computer, I would like to know which is the max I can add, and if I should add identical memories as the ones I have.
Thanks for your advices!!!


My System SpecsSystem Spec
.
31 Jan 2013   #2
Comp Cmndo

Windows 7 Home Premium 64bit
 
 

If this is your motherboard, your answer is there.
GIGABYTE - Motherboard - Socket 1366 - GA-EX58-UD3R (rev. 1.7)
My System SpecsSystem Spec
31 Jan 2013   #3
braddersz

Windows 7 Home Premium 64 Bit
 
 

You already have 8GB ram. Whats the reasons for adding more?.

It would be better to match the RAM speed and size, depending on your DIMM configeration.
My System SpecsSystem Spec
.

31 Jan 2013   #4
bobkn

Windows 7 Pro X64 SP1
 
 

As it's an X58 motherboard, if it was mine, I'd want to be using triple channel RAM. (3 matching DIMMs; 3X4 = 12GB.)

You might be hard pressed to notice the difference outside of synthetic benchmarks, I'd still prefer it.
My System SpecsSystem Spec
Reply

 Which ram memory should I buy for my mother EX58-UD3R




Thread Tools




Similar help and support threads
Thread Forum
which SATA ports for GA-X58A-UD3R rev.2
I'm a newbie thru and thru, in need of advice. I have a GA-X58A-UD3R Rev.2 w/i7/12gb RAM and the following drives- 120gb Vertex2 SSD (w/w7-64bit) 2-600gb DigiRaptors as RAID1 SATA DVD I originally plugged the SSD and DVD into GSATA2 and the RAID1 drives to GSATA3. I had BSOD once a week til I...
Hardware & Devices
Gigabyte EX58-UD3R (Realtek ALC888) - What is wrong with Realtek?
Hi, I've been trying to figure out my problem for months and months now. I even contacted Realtek but have no luck getting a reply back. The sound and all works perfect. It's just when I try to record sound from the sound card from my computer for MSN voice clips. It doesn't detect any sound?...
Sound & Audio
Is the Gigabyte EX58-UD3R motherboard compatible...
Is the Gigabyte EX58-UD3R motherboard compatible with i7 Duo Core Processor? Here is the link below about the motherboard i am planning to buy for custom pc. GA-EX58-UD3R (rev. 1.0) - GIGABYTE - Product - Motherboard - Overview If it is NOT compatible with dual core processor, is having a...
Hardware & Devices
Recommended Settings for Gigabyte EX58-UDR3?
I just flashed the BIOS for the above motherboard. My motherboard revision is 1.6. As part of the instructions it was recommended i load optimized defaults. Not realising at the time it would change some of the settings i clicked yes. Can anyone who knows this motherboard recommend some...
Hardware & Devices
BSOD with tcpip.sys on EP45-UD3R (Rev 1.1)
About 2 months ago I reformatted to Win 7 and ever since have been getting this problem. Somewhat frequently (2-3 times a week) my computer will BSOD with the following information Stop: 0x000000D1 error in process: tcpip.sys I looked into the problem and from what I could figure out from...
BSOD Help and Support
Installation Problems: Build 7100 on GA-EX58-UD5
I am out of ideas and would appreciate any help or insight. Windows 7 x64 RC does not want to complete installation after it's first reboot. The "starting windows" animation appears and just keeps going. A boot into safe mode shows it stops after: Loaded: \Windows\system32\DRIVERS\disk.sys ...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:49.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App