Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 scanner message "Which device do you want to use?"

14 Feb 2013   #11
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Can you or do you want to use the Cannon printer as default? If so right click on the Cannon printer and select default. Reboot and see if the Green check mark stays there on the Cannon. Use your programs one at a time and recheck and see if the Green check mark stays on the Cannon printer or if their is a program that doesn't work with Cannon set to default. If it was my computer I would remove HP scanner printer and the Onenote 2010 also from the computer.


My System SpecsSystem Spec
.
15 Feb 2013   #12
alphanumeric

Windows 10 Education 64 bit
 
 

I usually nuke the extra added virtual printers I never use like XPS and scan and fax. I use the "turn windows features on and off" section to do it. That way if I ever do need one of them its easy to put back in again.
My System SpecsSystem Spec
Reply

 Windows 7 scanner message "Which device do you want to use?"




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
"USB 3.0 This device can perform faster" message even though connected
Hi I'm getting the "USB 3.0 This device can perform faster. This USB Mass Storage Device can transfer information faster if you connect it to a Super-Speed USB 3.0 port" message even though the external disk is connected to a USB 3.0 port with a USB 3.0 cable. Any hints? Thanks
Hardware & Devices
HDD shows in "Device Manager" but not in "DiskPart"or" Disk Management
Hi Guys, any ideas how to access my external hard drive device manager can see it but it does not appear in disc management. I use this HDD perfectly in my car HDD player. But when I try to connect it to my Laptop, it does not show up in disk management. Please check the attached screen...
Hardware & Devices
SSD - "Reboot and Select Proper Boot Device" message
Hello All, I booted my machine to find it present me with two things I never encounter. 1) It booted into ASUS Express Gate (EG), which I believe I disabled when I first built the machine several years ago. 2) Upon exiting EG, it displays the main splash screen for my mobo. It then displays...
Hardware & Devices
"install now" on windows 7 home premium provides me with "no device.."
Hello, i have read up on this error, but i can't seem to find the solution :(. I know this post is common, but i feel i really do need assistance. The message comes up as "no device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK". I have...
Installation & Setup
on startup error message "Reboot and Select proper Boot device"
Hi Everyone, My computer started to freeze up a lot and now I receive the following error message on startup: "Reboot and Select proper Boot device. Insert Boot Media in selected Boot device and press any key." It is a Windows XP OS. Any help is greatly appreciated. :) Thanks!
BSOD Help and Support
USB - annoying "Device Can Perform Faster" message
Pops up every time I plug in a USB - I've got two different flash drives and an old mp3 player. Message is the same for all devices. Been using 7 RC1 since it came out (flash drives and mp3 player for a lot longer) but this message box is a relatively recent thing. Gives me a list of all my USB...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:56.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App