Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: ssd toolbox

24 Feb 2013   #11
OCIR

windows 7 home permium 64 bits
 
 

maybe its the marvill controler is has a issue with, my sata 3 6gb is on a marvill controler


My System SpecsSystem Spec
.
24 Feb 2013   #12
OCIR

windows 7 home permium 64 bits
 
 

Quote   Quote: Originally Posted by mitchell65 View Post
Hold fast there is another thread on this here:
New Intel SSD
Take a look
i am set to 0
My System SpecsSystem Spec
24 Feb 2013   #13
mitchell65

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Have to say that I had to Google "marvill controler" to find out what it was so am a bit lost here. There does seem to b an lot of info on the net regarding this controller, perhaps if no one more learned than me reads this thread in the next 24 hours it might be as well to go to Intell as i suggested earlier. Obviously they would need to have your mobo details.
My System SpecsSystem Spec
.

24 Feb 2013   #14
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Well if it is of any help to you blokes the Marvell controllers are regarded as better than the Sandforce ones at least and this is some info for you on them.

Marvell - Support - Driver Downloads

Marvell - Support

Just a thought but maybe OCIR you might just have a dodgy drive mate.
My System SpecsSystem Spec
24 Feb 2013   #15
carwiz

Windows 7 Pro-x64
 
 

Quote   Quote: Originally Posted by ICit2lol View Post
Well if it is of any help to you blokes the Marvell controllers are regarded as better than the Sandforce ones at least and this is some info for you on them.

Marvell - Support - Driver Downloads

Marvell - Support

Just a thought but maybe OCIR you might just have a dodgy drive mate.
I don't have a Marvell controller so I don't "need" a tool box for my SSD.
My System SpecsSystem Spec
24 Feb 2013   #16
OCIR

windows 7 home permium 64 bits
 
 

Quote   Quote: Originally Posted by ICit2lol View Post
Well if it is of any help to you blokes the Marvell controllers are regarded as better than the Sandforce ones at least and this is some info for you on them.

Marvell - Support - Driver Downloads

Marvell - Support

Just a thought but maybe OCIR you might just have a dodgy drive mate.
Platform:

Choose a PlatformMicrosoft NDIS2Windows 2000Windows 7 x64 (64-bit)Windows 7 x86 (32-bit)Windows 98/MEWindows Diagnostic Utility for Yukon DevicesWindows Driver Installer for x86 and x64 OSsWindows NT4Windows Server 2003 x64 (64-bit)Windows Server 2003 x86 (32-bit)Windows Server 2008 R2 x64 (64-bit)Windows Server 2008 R2 x86 (32-bit)Windows Server 2008 SP2 x64 (64-bit)Windows Server 2008 SP2 x86 (32-bit)Windows Style VCT for All Windows OSs x86 and x64Windows Vista x64 (64-bit)Windows Vista x86 (32-bit)Windows XP x64 (64-bit)Windows XP x86 (32-bit)DOSDOS DiagnosticsFreeBSD 5.3FreeBSD 5.4FreeBSD 6FreeBSD 7Linux 2.6 - FedoraLinux Kernel 2.4.20 and HigherNetWare 4.20NetWare 5.1NetWare 6.0Novell Client32Novell DOSODISCO OpenServer 5.0.7Solaris 8, 9 and 10 x64Solaris 8, 9 and 10 x86UnixWare 7.1.4
Part Number:

Choose a Part Number88E800088E800188E800388E801088E802188E802288E803688E803888E803988E804088E804288E805088E805088E 805288E805388E805588E805688E805788E805988E806188E806288E807088E807188E807288E807588EC03388EC036
3 drivers shown
DateDriver NameVersion3/27/12Windows Setup Installer (32- and 64-bit) for Yukon Controllers11.45.4.31/20/12Windows 7 & Server 2008 R2 x64 (64-bit)11.45.3.35/14/10Network Control Utility for Aggregation and VLANs in x86 & x64 XP, Server 2003, Vista, Server 200811.12.6.3
I whent buy platform windows 7 I dont know what all the part numbers are, should i just download the windows setup installer dated 3/27/12 /?
dogy drive as in ssd or driver / I boot from startscreen to desktop in 13sec,/ whats a good whay to test speed
My System SpecsSystem Spec
24 Feb 2013   #17
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Do you have your tool box program installed on another drive. The only time your
problem has happened to me is when I installed the wrong tool box or I was using Marvell
SATA III. I use Intel SATA II.
My System SpecsSystem Spec
24 Feb 2013   #18
OCIR

windows 7 home permium 64 bits
 
 

the marvill is the sata III port my intells are sataII ports so i hooked up the ssd to the marvill sata III port to get the sataIII 6gb's speed was I wrong in doing this?
My System SpecsSystem Spec
24 Feb 2013   #19
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

That is exactly the same problem I had. Install your SSD in the SATA II and
give that a try. It seems like Marvell, Asus and Intel SSD don't get along.
My System SpecsSystem Spec
24 Feb 2013   #20
OCIR

windows 7 home permium 64 bits
 
 

SATA II ICH10R vs. SATA III Marvel 9128 Controllers - Windows Enterprise Desktop this looks like the prob i have
So I can just log off and move the ssd plug from a sataIII port to a sata II port?
And l can juse leave the storage hdd on the sata III port
My System SpecsSystem Spec
Reply

 ssd toolbox




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Toolbox icon
New to the forum, HI there! I'm in 7 bliss this weekend just playing around with 7. Best thing since ear hair trimmers! :p Looking for a toolbox icon for 7 if anyone knows where one might be. Thanks! Mark
Customization
chrome toolbox
anyone know of an alternative to "chrome toolbox, extension" that doesn't work anymore inside chrome?? and cant be redownloaded as yet??
Browsers & Mail
Blazer Toolbox
One major problem with a Chevy Blazer is that it has no place for storing anything, except a tiny pocket where the jack goes, and what little extra space it has is already full. I have Googled some to see if I could find a premade toolbox that would fit the vehicle, but found nothing that I...
Chillout Room
OCZ Toolbox not woking
I have an OCZ Vertex 2, 60TB SSD I use for boot/apps. A 150GB Raptor for storage. The other day I downloaded the latest OCZ Toolbox to do some checking/maintenace. The Toolbox could not find my Vertex drive. I inquired around and was advised the Toolbox only works with Windows AHCI drivers and...
Drivers
SSD and Intel SSD Toolbox app
Not sure if this is the right forum, but... I recently installed an Intel X-25 M 120GB SSD in my VAIO SR290 notebook. The notebook has a Core2Duo T9600 cpu, 6 GB of RAM and is running Windows 7 Ultimate x64 SP1. Everything seems to be working fine, but the Intel Solid State Drive Toolbox...
Hardware & Devices
HP Toolbox does not work
After installing Win 7 my HP Toolbox gives me a message that says the Officejet Pro 550 driver is not installed. This is crazy since the printer works just fine but the Toolbox will not work. The toolbox is mainly needed for ink supply notifications. HP website says that I have to get...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 09:41.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App