Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Hot Temps even after installing new fan

04 Mar 2013   #21
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Why not download Core Temp and see what CPU Temp readings you get from that.


My System SpecsSystem Spec
.
04 Mar 2013   #22
Jordyi

Windows 7 x64
 
 

Core Temp is showing very fluctuating temperatures. They seem to start at the current idle temp (47C) then slowly drops down to around 35-38, stay there for a second or two then hop back up to 47-50 and go back down again to lows of 35.. Not sure what this means..

Tj. Max is 83C
After leaving it on for a few minutes, at idle: Min 33C, Max 60C

Once opening a game and putting the system under mild load (10%-20%) the temps go up to a consistant 46-47 whilst speedfan remains at 47.

I should also mention these are the temps I'm getting with a relatively cool room temp, unlike usual where my room heats up quickly due to my computer.

Had to uninstall Core Temp because after re-opening it, it caused my computer to black screen.. on re-startup, the program file was corrupt..
My System SpecsSystem Spec
06 Mar 2013   #23
Jordyi

Windows 7 x64
 
 

Update on the situation

Bought a new graphics card that now idles at 30-32 degrees using 20% fan speed and is super quiet.

The CPU is still a major problem but am going to look at resitting the heatsink in the coming days and replacing the side intake fans with some better one and see if that changes things.
My System SpecsSystem Spec
.

06 Mar 2013   #24
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

Jordyi,
Take pictures of the thermal paste on both surfaces and post back. Re-install only after cleaning completely all the old paste off same. Then use a premium paste and please watch a couple of videos and determine which application will work best for you. I have my own method as many here will attest to theirs the key is less is more and then a slow, even and steady approach to tightening the cooler down and I like doing a little wiggle with it in the tightening process. Once nice and snug then the paste will need to heat and cool several times to cure and then after say 3-7 days I would open and dbl. check the tightness again and snug if it's loose.
My System SpecsSystem Spec
Reply

 Hot Temps even after installing new fan




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
CPU Temps
This is not so much a thread about my cooling, as I know I am fine in that area, this is more a question about safe / comfortable operating temperatures. The reason I say this is because right now, with it being summer, my room can get rather warm. While running games such as Bad Company 2, or...
Hardware & Devices
Temps Okay?
Hi, I have just installed HWmonitor on one of my computers to monitor the temps I have attached a screenshot of what is displayed I know that TMP 0 is the motherboard and that TMP 1 is the CPU. But I am not sure what the TMP 2 is for and its running at 79c which seems on the hot side. The...
Performance & Maintenance
Does anyone think these temps are off?
Hi all i am posting a new OC with a new cpu i currently installed a 965 BE oc'ed to 4.1 ghz are these temps correct because cpuz can't detect them this also happened with my previous cpu 2.8 925 deneb but temps were really low with that one too round 16 to 14 c I also have a hyper 101 heatsink...
Hardware & Devices
i7 930 temps?
So my buddy asked me to post this regarding his i7 930 temperatures. He's running a ASETEK 510LC 120MM WATERCOOLER, but his temperatures vary among his cores. On average, his cores idle around 50, but each core has a different temperature, such as 46 to 55. On a watercooled system, those temps...
PC Custom Builds and Overclocking
Temps OK?
Now summer has arrived here in England I was wondering if my temps are OK as you experts will know better than me :) It is quite warm in my living room where my rig resides. TIA Steve
Hardware & Devices
CPU temps
Hi Guys, I fitted a new cpu and artic cooler pro 7 (rev 2) a month or so ago. Since then the temps in each core vary a fair bit from each other and 1 core seems locked at 40 degrees for some reason. Room temp is currently 13 degrees The temps as I type this are -
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:41.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App