Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Tools Chkdsk with no /f /r says errors, bootup chkdsk says none

19 Apr 2013   #1
macnab

Windows 7 Professional SP1 64-bit
 
 
Tools Chkdsk with no /f /r says errors, bootup chkdsk says none

AHCI disk.

Running chkdsk from Properties Tools with no autofix says there are errors.

Dismount the drive and reboot. Chkdsk reports no errors found. Properties Tools Chkdsk still syas there are errors.

Auslogics Defrag also says there are errors.


My System SpecsSystem Spec
.
20 Apr 2013   #2
pscowboy

W7 Home Premium 32bit
 
 

Assuming it's one of the Samsungs, there is an ES Tool diagnostic for their drives.
Download the offline (Dos boot) iso, burn it to cd, and run the long test. That will tell you for sure.

Downloads Freeware Tools Page 46 www.hiren.info
My System SpecsSystem Spec
20 Apr 2013   #3
macnab

Windows 7 Professional SP1 64-bit
 
 

Seagate. The SeaTools for DOS doesn't see any of the drives (AHCI problem?).
Got the SeaTools for Windows. Passes all the short tests. Will run the long test, but this will only finish in a (good)few hours time.
My System SpecsSystem Spec
.

20 Apr 2013   #4
pscowboy

W7 Home Premium 32bit
 
 

Please do the Dos bootable iso of Seatools.
My System SpecsSystem Spec
20 Apr 2013   #5
macnab

Windows 7 Professional SP1 64-bit
 
 

@pscowcoy: I did, it didn't see any of my 4 drives.
My System SpecsSystem Spec
20 Apr 2013   #6
pscowboy

W7 Home Premium 32bit
 
 

Are the four of them seen by the BIOS?
My System SpecsSystem Spec
20 Apr 2013   #7
macnab

Windows 7 Professional SP1 64-bit
 
 

Yes. I can set boot order.
My System SpecsSystem Spec
20 Apr 2013   #8
macnab

Windows 7 Professional SP1 64-bit
 
 

Drive failed SeaTools long test. Windows version can't attempt repairs. DOS version doesn't seem to see AHCI drives. I have a backup drive, will do backup. This should even report which file(s) it can't copy.

Doesn't explain why bootup chkdsj doesn't find errors. Might be AHCI problem as well, but it shouldn't be.

Thanks for help. Marking as solved.
My System SpecsSystem Spec
Reply

 Tools Chkdsk with no /f /r says errors, bootup chkdsk says none




Thread Tools




Similar help and support threads
Thread Forum
Slow bootup, BSOD after selecting user, CHKDSK errors, loss of video
Windows 7 Professional 64-bit AMD Phenom II X2 550 Black (3.1 GHz dual-core) ASUS M4A77TD Pro Motherboard G.Skill DDR3-1600 memory 4 GB EVGA GeForce 9500 GT 1GB video Western Digital 1TB WD10EADS Caviar Green I built this computer for my uncle in 2009. He called me after BSOD problems...
BSOD Help and Support
Continuous chkdsk errors ?
i am getting lately often chkdsk launching on boot and also when i use it to check the situation on the reported partitions (at least two physical drives so far) it reports errors almost on every run even if sometimes they are like 10 minutes after the previous "scan and fix errors" .... ...
Performance & Maintenance
Chkdsk Errors
Hi guys, Out of the blue, Windows started asking to check my External HDD for corrupt files. I went ahead and opened a command prompt and did a read only scan of chkdsk. It reported all fine and dandy and needs some fixing, no problem. The only problem is that I don't know which files are...
Performance & Maintenance
Request for chkdsk run on bootup which then hangs
hi After transferring files from a fat32 external hdd my laptop now gives me a "one of your disks needs to be checked for consistency" message every time I boot up. If I allow it to run chkdsk automatically, it then hangs half way through. I have done a complete hardware check & all is clear. I...
BSOD Help and Support
chkdsk errors
Hello, This is my first here in this forum. Please excuse and let me know if this not the correct forum to post. When I run the chkdsk, I am getting the following error: C:\Windows\system32>chkdsk The type of the file system is NTFS. WARNING! F parameter not specified. Running...
BSOD Help and Support
continual reboots during chkdsk @ bootup
So I schedule a chkdsk /r to take place on my RAID0 array and reboot the computer. It fires up and kicks off. Gets to about 90% of step 4 (verifying file data) and reboots the computer w/ no prompt whatsoever. Then continues on to do another chkdsk. followed by another, and another and...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:31.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App