Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 560Ti doesn't perform correctly.

13 May 2013   #21
paulpicks21

Windows 7 Professional 64 bit
 
 

Do you have Speedstep enabled?

With it enabled it should downclock to 1600mhz, if not then you may need to check the other power saving states in the bios or even check the power plan in windows control panel.

Once its downclocking to 1600mhz you need to go into the bios and adjust the voltage offset to get what you want for the load voltage, its a little trial and error, but if you already know the stable Vcore required for the speed you want then your will just need to adjust it accordingly. Have a look round for tutorials on offset mode.


Paul.


My System SpecsSystem Spec
.
13 May 2013   #22
paulpicks21

Windows 7 Professional 64 bit
 
 

Maybe best to carry on this talk in the post your overclock thread as its gone way off topic now.

Heres my shots under load and idle in that thread - http://www.sevenforums.com/overclock...ck-2-a-55.html
My System SpecsSystem Spec
13 May 2013   #23
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

it`s ok, he marked the thread solved awhile ago.

Yep, stepping is enabled.
My System SpecsSystem Spec
.

13 May 2013   #24
Dude

Windows 10 Pro X64
 
 

what about C1E and CPU V set to auto?
My System SpecsSystem Spec
13 May 2013   #25
paulpicks21

Windows 7 Professional 64 bit
 
 

Check the powerplan in windows control panel, make sure its set to high performance and reboot. Me and Steve both had an issue with this a while back and it turned out to be to do with this.

Edit: I think it was more to do with the way cpuz was reading it wrong but the power plan changed to high performance cured it.


Attached Thumbnails
560Ti doesn't perform correctly.-power.png  
My System SpecsSystem Spec
13 May 2013   #26
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

C1E is set to disabled and the core v is in a fixed state.

I already have the minimum processor state set to 0%
My System SpecsSystem Spec
13 May 2013   #27
Dude

Windows 10 Pro X64
 
 

Quote   Quote: Originally Posted by AddRAM View Post
C1E is set to disabled and the core v is in a fixed state.
If you set C1E to enable and CPUv to Auto it will throttle and your cpu-z will show 16-40 or whatever your oc is. Paul is right on the power, set it to high and leave it as custom in your BIOS
My System SpecsSystem Spec
13 May 2013   #28
paulpicks21

Windows 7 Professional 64 bit
 
 

Actually scratch all of that, I just checked my own, It was set to "balanced" I changed it to performance and it changed the cpuz reading to full speed 4.6ghz. So I changed it back to balanced and it switched back to 1600mhz.
My System SpecsSystem Spec
13 May 2013   #29
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

And mine has been on balanced.

What is CPU Core OCP Expander ? It`s set to default but can be changed to Enhanced.

Enhanced Turbo is set to disabled.

CPU PLL voltage is set to auto.

I don`t know, it just stays at 4 GHz

The cpu temp is 26 and the cores are 23 25 24 26 so it`s not really a problem.
My System SpecsSystem Spec
13 May 2013   #30
paulpicks21

Windows 7 Professional 64 bit
 
 

Just gonna check my bios settings now.
My System SpecsSystem Spec
Reply

 560Ti doesn't perform correctly.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
CPU-Z doesn't read my CPU frequency correctly!
Hi!I want to know why CPU-Z(1.68) doesn't read my cpu freq. correctly.I checked in my BIOS and it says as usual 3200 Mhz but CPU-Z says 1319 Mhz. Thanks for reading or reply.
Hardware & Devices
IE 10 doesn't download files correctly
http://i41.tinypic.com/14jbvkn.png I keep getting this message when I am trying to download from Fedex's website. Obviously, IE is not attempting to download the correct file. I also get a similar error from another website as well.. Chrome works completely fine and I am running on IE 10....
Browsers & Mail
My Win 7 x64 doesn't work correctly with DDR3
Motherboard: Gigabyte GA-EX58-UD3R Rev: 1.0 CPU: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz Memory: Kingston DDR3 4096MB PC10666 1333MHz BIOS EX58-UD3R F11 OS Microsoft Windows 7 Ultimate (64-bit) 6.1.7601.17727 (Win7 RTM) I bought 1 module Kingston DDR3 4096MB PC10666 1333MHz to run at...
Hardware & Devices
Windows doesn't resize icons correctly
Hello, my problem is some of the icons everywhere in windows (desktop, explorer ...) aren't being resized properly. For example, on the desktop, I have icon that has various scales like 48x48 and 64x64 (the default steps, and several other), but windows just refuses to acknowledge their existence...
Customization
Prototype doesn't install correctly?
Hi! I'm running Windows 7 Build 7100- Prototype says that it installed correctly, but whenever I press the Play button, it just closes and nothing happens. I ran all the files in the CD in Compatability mode for Vista (Service Pack 3), installed and then removed it twice, and restarted after...
Gaming
IE 8 doesn't load pages correctly
For instance, when trying to access scrapbook in orkut.com the following error message comes: Webpage error details User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Tablet PC 2.0)...
Browsers & Mail


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:50.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App