Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: USB Error

24 Jul 2013   #1
hollyoaks777

windows 7
 
 
USB Error

I am getting an errror with all my usb's I installed Samsung link yesterday but I uninstalled it because of this problem I deregistred my computer from Samsung link and restored my computer from an old backup I had but I still have the problem it reads as.

"This file does not have a program associated with it for performing this action. Please install a
program or, if one is already installed, create an association in the Default Programs control
panel."
Thank you in advance for any help.


My System SpecsSystem Spec
.
24 Jul 2013   #2
maxie

windows 7 home 64bit
 
 

Hi there ... What do you mean by .. You Installed Samsung Link ? And also deregistred it .. Please Post a screen shot of your Device Manager .. With the Items expanded that are missing
My System SpecsSystem Spec
24 Jul 2013   #3
hollyoaks777

windows 7
 
 

Quote   Quote: Originally Posted by maxie View Post
Hi there ... What do you mean by .. You Installed Samsung Link ? And also deregistred it .. Please Post a screen shot of your Device Manager .. With the Items expanded that are missing
Samsung link is like a back up service for you're phone and computer but not a very good one as if you delete a file from the samsung website it deletes it from you're computer too. I am sure that's what caused the problem. in Device manager there are no caution symbols. See image.

My System SpecsSystem Spec
.

24 Jul 2013   #4
maxie

windows 7 home 64bit
 
 

Hi there .. You are right there are no errors there .. You have stated that you have done a Restore .. Which does not work ... Are the Drivers you are using from the Samsung site ? If they are i would suggest that you try a Repair and Install ..
My System SpecsSystem Spec
24 Jul 2013   #5
hollyoaks777

windows 7
 
 

Quote   Quote: Originally Posted by maxie View Post
Hi there .. You are right there are no errors there .. You have stated that you have done a Restore .. Which does not work ... Are the Drivers you are using from the Samsung site ? If they are i would suggest that you try a Repair and Install ..
Not that I know of since it was a full recovery with my system partions. Is there a program that would do the repair?
My System SpecsSystem Spec
24 Jul 2013   #6
Sub Styler

Windows 7 Ultimate x64
 
 

Not a USB error, an Autorun Error, What device are you attaching, Drive, Camera etc....

Quote   Quote: Originally Posted by hollyoaks777 View Post
"This file does not have a program associated with it for performing this action. Please install a
program or, if one is already installed, create an association in the Default Programs control
panel."
Thank you in advance for any help.
In the control panel go to "Program Access and Defaults" then select "Change Autoplay Settings"

Then if your device is not listed, try the marked options.

If the device is a drive and has an autorun.ini file, open the .ini and see what file it points to and report back.


Attached Thumbnails
USB Error-devices.png  
My System SpecsSystem Spec
24 Jul 2013   #7
maxie

windows 7 home 64bit
 
 

A full Recovery should have worked .. As it would include all the original Drivers .. Most Samsungs come with a Disc .. Do you have one .. ?
My System SpecsSystem Spec
24 Jul 2013   #8
hollyoaks777

windows 7
 
 

Quote   Quote: Originally Posted by Sub Styler View Post
Not a USB error, an Autorun Error, What device are you attaching, Drive, Camera etc....

Quote   Quote: Originally Posted by hollyoaks777 View Post
"This file does not have a program associated with it for performing this action. Please install a
program or, if one is already installed, create an association in the Default Programs control
panel."
Thank you in advance for any help.
In the control panel go to "Program Access and Defaults" then select "Change Autoplay Settings"

Then if your device is not listed, try the marked options.

If the device is a drive and has an autorun.ini file, open the .ini and see what file it points to and report back.
I set them all to defaults I noticed that my old windows phone is at the bottom as well as my new Samsung. Still getting the error after setting to defaults and I don't see any Autoplay for a usb
My System SpecsSystem Spec
24 Jul 2013   #9
Sub Styler

Windows 7 Ultimate x64
 
 

What device are you attaching? Is it a phone, android?

Connect the device,

Enable mass storage via the android notification (on phone)

Ignore the error

Open "My Computer", is the device listed as a drive?
My System SpecsSystem Spec
24 Jul 2013   #10
hollyoaks777

windows 7
 
 

Quote   Quote: Originally Posted by Sub Styler View Post
What device are you attaching? Is it a phone, android?

Connect the device,

Enable mass storage via the android notification (on phone)

Ignore the error

Open "My Computer", is the device listed as a drive?
Yes it's android and it's listed as a potable device.
My System SpecsSystem Spec
Reply

 USB Error




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Burnt out from error error error! Time to go back to Paper.
Hello there. I have been redirected here by jamanji, whom has been most helpful by the way. My PC crashed a little over a week ago. Rather than retype everything, I would like to give you the link to my post. I am not 'Tech' per se, but I would like to try and resolve my problem myself, To...
System Security
Error 41, Error 1001 and error 6008.
Hello there. Recently my computer have just randomly shutdown meanwhile i'm playing games like CS;GO, League of Legends. The screen will just turn black and it will start to make one hell of annoying noise untill it reboots. I've updated all my drivers. Tested my memory. Tested my RAM. Run a...
BSOD Help and Support
Error copying file: Data error (cyclic redundancy check). CRC Scan ?
Edit: Think my hard drive may be failing and was the cause of my file synchronizing crash. I use it mostly to stream music and video and access the hard drive a lot. Any advice thanks HDDStatus - Tool to check hard disk status, health and reliability Hey, I've been using GoodSync for the...
Backup and Restore
BSOD by ntoskrnl.exe, error d1, error 3b, error 1a
I've just install windows 7 home premium 64bit and got 4 times of BSOD. for the first time error code is 0x0000001a for the 2nd time error code is 0x0000003b for the 3rd time error code is 0x0000003b for the 4th time error code is 0x000000d1 I also attach minidump files and text files that...
BSOD Help and Support
Scan Error Error while Scan::0::LEAD Error: Twain source manager no
hi.... i have promblme , i do not know how to fix it.. i have kodak scnners i1220 plus i have RD Web Access the promblme is.. I have a system based on Oracle has been connted with one scanners( i connected with scanners) When i do a scan shows me this a message (Scan Error Error while...
Hardware & Devices
BSOD error.. Restarts, but power button stays on, graphics card error?
Hey guys, i want to thank you ahead of time for helping me. This BSOD is a pain in the butt. Intel Pentium 2.8GHZ RAM 3.5 32 bit OS Intel GG965 Express Chipset Family I have already reinstalled the operating system multiple times, i think its a faulty graphics card, but i want to be...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:11.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App