New
#31
Nice temp on the prime Gary, I think they run quite similar to Ivy as far as temps go, you get to around 4.2-4.4GHz fine and then the temps go mental.
I never understood what people were talking about with IB having crazy temps. It was more sensitive to voltage, but I've never seen any crazy temps out of mine. I think there were some bad CPU's out there, and maybe that is where all the talk came from...idk
Sorry Kelly, maybe 'Mental' was a little over the top, I think I was just too used to the temps of Sandy and then when I got Ivy the temps were considerably higher at the same speeds, but with Ivy it is perfectly fine as they do run hotter and obviously the TJ Max is 105. I did manage to hit that at 5GHz lol.
Before I was used to highs of mid 60s to 70s and with Ivy I have had to get used to temps much higher than that when running prime and IBT.
I worded it wrong.
Very good temps Gary.
Although a 960 Bloomfield do run hot I have never had over 2 C difference in core temps. With any cpu you will find a voltage point where the temps make a major jump. That is why I mentioned watching the temps.
Some where a long time ago Intel stated that idle temps could be off quiet a bit because their sensor were more calibrated for high temp.
They were not concerned how low temps got at idle but how hot they got under load. That makes sense. Full load at 4.2 and 69C is great temps.
My low temps will be about 10 to 12c lower in bios compared to program temps. Whether the 10 to 12 degrees difference carry on out to the hight load temps; I don't know and have no way of checking.
What is your vcore at 4.2?
I knew what you meant, but I've heard others talk about the extreme temps of Ivy Bridge. I think what messed people up was that Sandy Bridge you could throw the voltage to it and the temps were likely to be ok and Ivy Bridge was more sensitive to higher voltages causing temps to sometimes get out of hand.
Sorry Gary, this is off topic, I think me and Kelly have done this twice tonight now
I will refrain from further comments.
A good little artical on Haswell. I doesn't give a step by step but a very good idea how it all works together.
3 Step Guide to Overclock Your i7 / i5 Haswell Platform | Overclockers
That's OK with me, we all learn that way. :)
I think the volts reported in CPUz at 4.2GHz is 1.207. I don't know if that's Vcore or not, there are so many terms. As a comparison the Sandy at 4.4GHz runs 1.344-1.368V.
On the Sandy 4.4GHz again, here is Core Temp read running IBT standard, note the !5C spread in core temp.