Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: RAID 0 Volume Disconnects Itself

08 Aug 2013   #1
too

Windows 7 x64 Ultimate
 
 
RAID 0 Volume Disconnects Itself

I'm having issues with one of my two drives for RAID 0 array.



The one in yellow is the one that just goes 298GB and then goes back on. The one 0GB doesn't exists and only appears when the other one fails.
All drivers are updated and no change has been made.
When I check the PC for errors nothing appears.
Can someone help me here?

Thanks.


My System SpecsSystem Spec
.

10 Aug 2013   #2
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Please provide information as described below:
Disk Management - Post a Screen Capture Image
My System SpecsSystem Spec
14 Aug 2013   #3
too

Windows 7 x64 Ultimate
 
 

Maxtor disk has really died :-(
Thanks for the help!
My System SpecsSystem Spec
.


14 Aug 2013   #4
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Bad luck
My System SpecsSystem Spec
Reply

 RAID 0 Volume Disconnects Itself




Thread Tools





Similar help and support threads
Thread Forum
Unable to create New Simple Volume of a 3.7 TB RAID disk
I just recently did a Windows 7 re install so I would have a clean slate when using a new raid setup. (LSI 9211-8i with (4) 2 TB WD Red) I am new to RAID's but everything seams to be working fine. I used 4, 2 TB WD Reds in a RAID 10 and got the expected 3.7 TB of space. I run my OS on a small 120...
Installation & Setup
Windows 7 keeps losing index of RAID volume
I have a 4-disc enclosure set up as a single RAID volume, attached to a desktop running Windows 7 Professional, 64-bit. About every 2 or 3 weeks, I must reindex this volume, because it simply stops working. I don't know if it is getting corrupt or just disappearing, but the windows search on...
Performance & Maintenance
Recovering a raid 0 volume?
Hi, So i have my computer running with a 120gb ssd as the boot drive and 2x 1tb hdds in raid 0 for the data. And today when i went to boot up my computer the raid 0 failed to start....both of the drives are detected but only one appears to be in the raid 0 volume. I know the disc physically still...
Hardware & Devices
raid 0 windows ntfs gpt volume
Hello, Setup mb asus p6t6 ich10r (raid controller) 2 x vertex 30GB 2 x seagate 1.5TB in ( motherboards controller fakeraid ) raid 0 array Volume1 = 1 GPT partition with 1 windows dynamic simple volume ntfs formated (just 1 big ~3TB partition for storage created on a previous install of win7)...
Hardware & Devices
No Drive Letter For RAID 1 Volume
I'd appreciate some help. I'm setting up 2 x Western Digital RE4ís in RAID 1 for Data Storage in a Win 7 Ultimate 64 bit system that is using a single SSD for the OS. The two RE4ís have been set up in the option ROM and when the OS completes startup, Rapid Storage Technology indicates that...
Hardware & Devices
Sharing Permissions for a NAS server raid volume
Hey all, I have been beating myself up over this file sharing thing. Brief explanation of the system setups. I have a work computer that serves as a camera surveillance server with a third party program. All is fine with that, in fact never better. The cameras use the #1 NIC for the data for the...
Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 23:33.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App