Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Case help needed again

10 Aug 2013   #1

Windows 7 64 (bit)
Case help needed again

I went to have a look at the Switch 810 and it cant fit a 360 rad (thickness 60mm) with push/pull

is there any case out there for at least £150

That will fit 360 rad top with a (thickness 60mm) in push/pull. and 240 rad (60mm thick) in push/pull.. 120 rad (60mm thick) push

My System SpecsSystem Spec
10 Aug 2013   #2

Windows 7 64 (bit)

Anyone :?
My System SpecsSystem Spec

 Case help needed again

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
The Case of the Missing Pillow Case
Please press play to set the right mood as you read. ;) NzlG28B-R8Y The Case of the Missing Pillow Case Today appeared to be a normal day just like any other. I had decided that I should strip the beds and wash the sheets from them since it had been a while and they were starting to...
Chillout Room
Need Case Help
I have been looking at the HAF XM case by Cooler Master Could i fit a Dual Rad on the top and a single 120mm Rad on the Rear Case
PC Custom Builds and Overclocking
Case upgrade advice needed
I would like to upgrade the case for my machine and have a few questions before I order anything. The Corsair 600t is a nice roomy item but, too flashy for me with all the led's. Want to go with the Antec P280; a couple of reasons why, no led's, good cable management and room for extra...
PC Custom Builds and Overclocking
Got my new case :)
I just got my new 600T White case in today, as well as my Seasonic PSU & RAM :) It was killing me to see what it looked like powered up, and still another week before I can order the rest of my new build. So, I moved the main guts of the old system into the new case w/the PSU. Yea,...
PC Custom Builds and Overclocking
Recommendation for case needed!
Hello I am looking for a good looking case, prefer mid tower not full. It must be elegant , cool and quite. I will do some over clocking as well. Thank you!
Hardware & Devices
Case getting hot
Hi guys. My case is getting very hot inside and has only recently started doing so. My case is a Coolermaster Elite 334 and i have a 92mm variable fan up front and a 120mm fan on the back. Any ideas as i am pretty new to this. Thanks in advance.
PC Custom Builds and Overclocking

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 17:40.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App