Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Form Factor Computer Case and Motherboard.

07 Sep 2013   #1
Italiandogs

Windows 7 Professional 64bit
 
 
Form Factor Computer Case and Motherboard.

Hi everyone! I have currently a Dell Precision 670 workstation with a LS-36 Motherboard with Dual physical Xeon Processors. I was wondering what Form Factor this motherboard is. The case that i want can be found here. It is an ATX Form Factor


My System SpecsSystem Spec
.
07 Sep 2013   #2
DocBrown

Win7 Enterprise, Win7 x86 (Ult 7600), Win7 x64 Ult 7600, TechNet RTM on AMD x64 (2.8Ghz)
 
 

A lot of Dell's MB were odd size & footprint mounting to the case. Can you take any pics & measurements ?
Nice looking unit in your link w/ Free Shipping.
My System SpecsSystem Spec
07 Sep 2013   #3
Italiandogs

Windows 7 Professional 64bit
 
 

Quote:
By DocBrown...
A lot of Dell's MB were odd size & footprint mounting to the case. Can you take any pics & measurements ?
Nice looking unit in your link w/ Free Shipping.
It is 11inches wide and 15.25 inches high

Also under those two big green hoods are the cpu's. the CPUs are located in the center of each 6 copper piping. So I'm guessing I can take those off and install smaller heat sinks and fans

Also if my wanted case wouldn't fit would a full Tower (here) or an Ultra Tower (here) work/fit?


Attached Thumbnails
Form Factor Computer Case and Motherboard.-image.jpg  
My System SpecsSystem Spec
.

Reply

 Form Factor Computer Case and Motherboard.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Can't find network driver. HP Compaq dc7800p small form factor.
Good morning everyone! I have a HP Compaq dc7800p Small Form Factor PC. It originally had Vista business on it, but--for obvious reasons--I am downgrading to XP Pro. This is was supposed to be a routine wipe and install, however, I must be mislead as to which drivers are required--specifically...
Drivers
Intel exits the desktop motherboard business to focus on new form fact
http://www.pcworld.com/article/2025926/intel-exits-the-desktop-motherboard-business-to-focus-on-new-form-factors.html Are desktops doomed to extinction?
General Discussion
OWC is readying a 2TB, 3.5-inch form-factor workstation SSD for 2013
OWC is readying a 2TB, 3.5-inch form-factor workstation SSD for 2013 | Ars Technica
News
Compaq Deskpro EN small form factor
I have a business machine, very old. It came with Win 2000, and was leased out to business then returned for more recent models. These are eagerly snapped up, and I have had this one for a number of years. But it just keeps on going and going, and I like it very much. I put Windows 7 on, just...
Drivers
Intel's SSD 310: G2 Performance in an mSATA Form Factor
SSDs are getting smaller, good news for laptops and netbooks. Hope to see smaller laptops/netbooks with these small boot drive SSDs and a 500GB HDD, great combination. Add in the new Sandy Bridge CPU, 8GB RAM, and they will have excellent speed. More...
News
eMachines EL1200-06W Small Form Factor Desktop PC
eMachines EL1200-06w. AMD Athlon 64 2650e Desktop Processor OS: XP This came with 1GB RAM. Total RAM allowed is 4GB. Two slots. One slot has 1GB RAM. Question: In the 2nd slot can a 2GB RAM be installed if it is correct RAM? For a total of 3GB RAM?
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:49.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App