Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Help with my new build pc..

12 Sep 2013   #1
CityLady

windows 7 64bit Enterprise
 
 
Help with my new build pc..

Hi there, I had such an old machine before this one.. which I built myself and fully proud of this fact, except I have a problem with SM bus controller and universal bus usb controller. These have yellow exclamation marks next too them in device manager. When i try updating driver it tells me no driver found. I try locating it via driver ID and it says there is a problem, yet no driver is found.

Motherboard is a H77MA-G43

My Processor is a intel core I5

I am using usb 2.0 but this has 3.0 capabilities...

Any help on this would be really appreciated....

regards

Citylady


My System SpecsSystem Spec
.
12 Sep 2013   #2
DavidE

Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64
 
 

Hi Citylady,
Have you tried using the Intel Chipset Driver and USB 3.0 driver from here:
MSI Global ? Motherboard - H77MA-G43

Your specs show the motherboard as MSI MS-7756 and your OP says H77MA-G43
My System SpecsSystem Spec
12 Sep 2013   #3
CityLady

windows 7 64bit Enterprise
 
 

Than ks for your response I have downloaded one and it's still the same I think I need to plug something that is USB 3.0 for the drivers to be installed. I also thank you for the info on my specs being wrong..I'll put it right...my actual motherboard is a MSI MS-7756 and really don't know what i was thinking at the time i put it in.

I don't know what to do now...
My System SpecsSystem Spec
.

12 Sep 2013   #4
DavidE

Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64
 
 

I looked further and it seems they use both MS-7756 and H77MA-G43 for this MB
Love it when they confuse things like that

Help with my new build pc..-msisp01.png


My System SpecsSystem Spec
12 Sep 2013   #5
CityLady

windows 7 64bit Enterprise
 
 

This is a snip of my device manager and message i get when i try updating the driver. I see a little further down there is usb drivers installed...so i really don't know what too do..


Attached Thumbnails
Help with my new build pc..-capture.png  
My System SpecsSystem Spec
12 Sep 2013   #6
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Did you manually point the installer to the driver or just let Windows search for it?
My System SpecsSystem Spec
12 Sep 2013   #7
CityLady

windows 7 64bit Enterprise
 
 

Hi Boozad I did both...and still the same problem I've even tried to find it on the original disc and nothing found. completely baffled by this
My System SpecsSystem Spec
12 Sep 2013   #8
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Can you take a screenshot with the USB Controllers (that have drivers) expanded please.
My System SpecsSystem Spec
12 Sep 2013   #9
CityLady

windows 7 64bit Enterprise
 
 

Hope this helps...


Attached Thumbnails
Help with my new build pc..-capture1.png  
My System SpecsSystem Spec
12 Sep 2013   #10
CityLady

windows 7 64bit Enterprise
 
 

Here is the usb drivers too


Attached Thumbnails
Help with my new build pc..-capture-3.png  
My System SpecsSystem Spec
Reply

 Help with my new build pc..




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
preposed build log for my new under 5 k computer system build
CASE - Rosewill Gaming Super Tower Computer Case BLACKHAWK-ULTRA primary drive ssd - Samsung Electronics 840 Pro Series 2.5-Inch 512 SATA_6_0_gb Solid State Drive MZ-7PD512BW sound card - ASUS PCI-Express x1 Sound Card XONAR ESSENCE STX/90-YAA0C0-0UAN00Z CPU - AMD FD8350FRHKBOX FX-8350...
PC Custom Builds and Overclocking
Can I install Icon Packs designed for Build 7600 on to Build 7601?
Can I install Icon Packs designed for Build 7600 to Build 7601? An Icon Pack was saying install on to 7600 only and after I checked my regedit, I learned that I have 7601 (Probably SP1, I don't know). Would I have any problems if I install the icon pack? Thanks.
Customization
Upgrade from Build 7100 to Build 7264?
Hi All, I am currently running OS 7 Beta RC Build 7100. Were do I get this newer version, is there a big difference? And am I able to upgrade to the newer Beta? I realize that October is fast approaching for the RTM but I plan to keep running the Beta for a couple of months past the Grand...
Installation & Setup
Windows 7 Build 7260 (first candidate build of RTM)
Windows 7 has reached RTM builds and there will be several candidate builds in RTM. first candidate build of RTM is build 7260. 6.1.7260.0.win7_rtm.090612-2110 - RTM branch build compiled on 12 june.
General Discussion
Should I upgrade My Win 7 build to a newer build???
Hello, Ive recently built a new comp and put win 7 on it. Now, I was wondering about the new/differant builds. Looks like I have build 7100. And thus far really like, alot! Should I download a new build? What are the differences? Will I notice? Where Do I get new builds?
General Discussion
Windows 7 Build 7012 Screenshots Emerged & Build 7013 Details
Windows 7 Build 7012 Screenshots Emerged & Build 7013 Details http://www.blogsdna.com/wp-content/uploads/2008/12/windows-7-logo.jpg We all are waiting for Windows 7 Beta 1 build 7000 to get release but it seems some one out their already have access to Windows 7 Build 7012. Here is...
News


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:40.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App