Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 800mhz fsb t7700 chip. ram is only 667mhz

16 Sep 2013   #1
abs4nz

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
800mhz fsb t7700 chip. ram is only 667mhz

dell 0U990C motherboard. Phoenix ROM BIOS PLUS Version 1.10 A16. does it support 800mhz ram and would it make much of a difference? pretty cheap to upgrade. why does dell not provide info on motherboards, or much else? cheers.


My System SpecsSystem Spec
.
16 Sep 2013   #2
Sub Styler

Windows 7 Ultimate x64
 
 

I have not looked it up to see what your board will support, being a Dell you are not likely to have the option to manually set your RAM timings. (this would allow you to see what the BIOS will allow you to go upto). Worth a look, just Disable SPD, dont save though.....

If you have a RAM/CPU Bus Ratio option, see if it will allow 1:1, this would run 800mhz ram alongside your 800mhz chip.

To be honest there would be no noticeable difference from switching 667 out for 800mhz memory, the latency would go up even though the throughput could be higher.
My System SpecsSystem Spec
17 Sep 2013   #3
SandeepP

Winndows 7 32 bit
 
 

Quote   Quote: Originally Posted by abs4nz View Post
dell 0U990C motherboard. Phoenix ROM BIOS PLUS Version 1.10 A16. does it support 800mhz ram and would it make much of a difference? pretty cheap to upgrade. why does dell not provide info on motherboards, or much else? cheers.
Hi abs4nz,

Please let me know the model number of the system you have so we can check the specifications and provide you with the required information.

Most of the information about the system is already available on the manuals. You can check them at the link below:

http://dell.to/11iojrK

Keep us posted with the results so we can advise you further.
My System SpecsSystem Spec
.

Reply

 800mhz fsb t7700 chip. ram is only 667mhz




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
DDR2 RAM 667mhz Vs 800mhz Question
Hello all. This is probably a very easy question to answer but I thought I'd ask just to make sure. I am running Windows 7 (x86) on a desktop and have 2 gigs of Corsair DDR2 RAM (800mhz) installed. I also have a spare 2 gigs of cheaper DDR2 RAM running at only 667mhz. If I add the extra RAM...
Hardware & Devices
Asus P5b Deluxe with 8gb of DDR2 800mhz
HI, first please don't tell me, 'you should buy a new motherboard because the one you have is old'. I know that, but right now i don't have money to change it. Ok, so the thing is that i have 4 2gb Kingston HyperX memory at 800mhz on my P5b Deluxe. So 8gb in total. At first no problem, the...
PC Custom Builds and Overclocking
Runing ram at 800mhz on 667 mhz board
Is this OK? Ram is ddr2 800mhz so its not overclocked, only motherboard is d667mhz...
PC Custom Builds and Overclocking
RAM 800Mhz and 600Mhz combination?
Hi, Out of curiosity what would happen if I installed the following in a machine: - 1x1GB 800Mhz RAM - 1x2GB 600Mhz RAM Would the two different Mhz's cause any problems? Thanks in advance, Ashley
Hardware & Devices
CPU locked at 800MHz?
I've got an HP DV6810us. It's got an Athlon TL-60 2.0GHz processor in it. When I installed CPU-Z, it is telling me that my CPU is locked at a 4x multiplier? It didn't have this issue with Vista, it's only after I installed Windows 7 x64 pro. Any thought's? I made sure that the...
Hardware & Devices
Intel P4 800mhz FSB on a 400/533 FSB Board
Tittle says it all i'm trying to run a 800mhz FSB processor on a motherboard that supports 400/533mhz FSb. so my question is, will the processor run at full speed? will it work at all? XD Thank you very much for any replies :) Mercurial~
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:36.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App