Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: WDC WD5000BPVT-00HXZT1 ATA Device

16 Sep 2013   #1
abs4nz

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
WDC WD5000BPVT-00HXZT1 ATA Device

will the samsung 840 pro 128gb ssd drive plug into my laptop? if not can you suggest an alternate thats as good. thanks.


My System SpecsSystem Spec
.
16 Sep 2013   #2
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Hello abs4nz absolutely mate the Samsung's in any form are really the best in my view I have them in my machines plus of course other brands but I would go Samsung every time. If you are looking to reinstall try this.

Clean Reinstall - Factory OEM Windows 7

You only need the code from the sticker on the bottom of the machine and it will be bloatware free
My System SpecsSystem Spec
16 Sep 2013   #3
abs4nz

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by ICit2lol View Post
Hello abs4nz absolutely mate the Samsung's in any form are really the best in my view I have them in my machines plus of course other brands but I would go Samsung every time. If you are looking to reinstall try this.

Clean Reinstall - Factory OEM Windows 7

You only need the code from the sticker on the bottom of the machine and it will be bloatware free
so just for good measure, the samsung 840 pro with sata3 will just plug into the same bay as the hdd ata i have in my laptop? cheers.
My System SpecsSystem Spec
.

17 Sep 2013   #4
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 


Yes mate go for it you will be really happy with theperformance even if the port is 3Gbs - I cannot for the life of me find the specs for that board.
When you install the SSD will be aligned by the OS and you just need to make sure the defrag is off and the TRIM is enabled.
See the tips in this Optimize Windows 7 (point 10) you can at your leisure do the rest as well.
The TRIM SSD Tweaks and Optimizations in Windows 7 just look for the command prompt instructions. It might be as well to look at setting the BIOS to ACHI too mate.
By the way that was a really super effort with the system specs I wish everyone who posts would do that makes such a difference when answering posts
My System SpecsSystem Spec
19 Sep 2013   #5
abs4nz

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
WOW!

Quote   Quote: Originally Posted by ICit2lol View Post
Hello abs4nz absolutely mate the Samsung's in any form are really the best in my view I have them in my machines plus of course other brands but I would go Samsung every time. If you are looking to reinstall try this.

Clean Reinstall - Factory OEM Windows 7

You only need the code from the sticker on the bottom of the machine and it will be bloatware free
Awesome speed. installed 2.4 ghz cpu as well and the effect is amazing. Now thinking of installing the t7800 2.6ghz cpu when one becomes available in NZ. Its like a new pc.
My System SpecsSystem Spec
20 Sep 2013   #6
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Good stuff mate am so glad it is working well now.

Now to be honest putting a new CPU in for 0.2GHz difference abs4nz I don't think it will make that much difference except that the front bus speed is better. What sort of difference that is going to make I am not sure but if you are happy with the change then go for it. While you are at it you might as well fit another 1GB RAM too that will help things along too.

Now what puzzles me is that you said when the T7800 is available in NZ? because that CPU was released back in '07. I know things over there are very expensive compared to what we pay here so do you have a job getting parts like that??
My System SpecsSystem Spec
20 Sep 2013   #7
abs4nz

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by ICit2lol View Post
Good stuff mate am so glad it is working well now.

Now to be honest putting a new CPU in for 0.2GHz difference abs4nz I don't think it will make that much difference except that the front bus speed is better. What sort of difference that is going to make I am not sure but if you are happy with the change then go for it. While you are at it you might as well fit another 1GB RAM too that will help things along too.

Now what puzzles me is that you said when the T7800 is available in NZ? because that CPU was released back in '07. I know things over there are very expensive compared to what we pay here so do you have a job getting parts like that??
Sorry, i should be a little more specific in my posts. Lesson learned . I'm not quite sure of buying off ebay as returns would be difficult, not to mention expensive. I've allready added the 1GB of RAM to a total of 4GB as you've reccomended. With regard to the T7800, its really a matter of just having my system running at its full potential. 'When the T7800 is available in NZ' means when a used one becomes available on our local auction site Buy online and sell with NZ's #1 auction & classifieds site | Trade Me to be able to return it without spending more than what the chip costs. Also I'd feel more secure buying within NZ. For example, there is a T7800 chip for sale for something like $50 USD from the US. But postage is something like $70 USD. So I will bide my time with a saved search that will alert me via email when it is listed. When you speak about a faster FSB, am I able to go for a chip with a higher FSB, say 1066MHz? I was under the impression that I must keep it at 800MHz. I'm sure it comes down to the motherboard, which I am unable to find the specs for. I've googled the hell out of the board number with no luck. Not that it means I will stop trying, as i'd just like to have a complete knowledge of my system. Thanks. ( I will update my system info now )
My System SpecsSystem Spec
20 Sep 2013   #8
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Yep me too mate it is very frustrating when that happens so have you tried Googling the machine model itself it might throw up some more detail than we have already.

But in any case that front bus speed is going to be governed by the CPU mate it in itself is pretty good at 667 and the other at 800 is better of course but like you say getting hold of that CPU is problematical to say the least. Have you tried any OZ sites yet?

This will give you some idea of what we are dealing with here Front-side bus - Wikipedia, the free encyclopedia
My System SpecsSystem Spec
20 Sep 2013   #9
abs4nz

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by ICit2lol View Post
Yep me too mate it is very frustrating when that happens so have you tried Googling the machine model itself it might throw up some more detail than we have already.

But in any case that front bus speed is going to be governed by the CPU mate it in itself is pretty good at 667 and the other at 800 is better of course but like you say getting hold of that CPU is problematical to say the least. Have you tried any OZ sites yet?

This will give you some idea of what we are dealing with here Front-side bus - Wikipedia, the free encyclopedia
So are you saying that MAX FSB isnt governed by chipset, motherboard AND cpu? Ive read that it is. If not I guess I should research better as there's a lot off people who 'think' they know about stuff but don't). Either way, Dell should list upgrade possibilities on there support site, if not actual specs of the motherboard.
My System SpecsSystem Spec
Reply

 WDC WD5000BPVT-00HXZT1 ATA Device




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
WD SES Device USB Device driver not found from old internal hard drive
I have an old Western Digital drive that came with Dell Inspiron One 2305 and replaced it after 5 years. There are some files I need from it now and I'm trying to connect via usb to sata. The WD volume does not show up. I got to device manager and found it listed in in unknown devices and it needs...
Hardware & Devices
Unknown device in device manager after Bios default settings are
applied. Sorry that last word didn't get in the subject line. So: http://i.imgur.com/QoSy2wX.png These two values are: USB\VID_0CF3&PID_3000&REV_0200 USB\VID_0CF3&PID_3000
Drivers
Unknown Device in Device Manager/Show Hidden Devices
I have a Toshiba laptop, model L505-ES5018. I had Windows 7 Home Premium 64 bit installed on here, but decided to reformat my hard drive using Windows 7 Ultimate 64 bit. After the reformat was finished, I ran Windows Update and it found several items to download and install for me. I noticed...
Drivers
Device Manager Code 19 Error for HP CDDVDW TS-H653T ATA Device
I am having an issue where my DVD/CD RW has a code 19 error in device manager. The drive still works as I used it to boot a Windows CD and run a startup repair to see if that found anything. I tried uninstalling the drive and then scanning and it failed to install the drive. I also tried...
Drivers
Bluetooth device not in device manager, no hardware switch, Acer netbk
Model is Acer Aspire One D270. Internal bluetooth doesn't work. Nothing in device manager. Fn+F3 is meant to control it, but doesn't. May be because I've messed with some programs. Trying to re-install to factory settings. Any suggestions at all? thanks D:
Network & Sharing
base system device, video controller and unknown device missing
hie i have just installed window 7 and this devices are missing, any help will be very much appreciated. base system device device id PCI\VEN_1217&DEV_7110&SUBSYS_117C10&PEV_00 PCI\VEN_1217&DEV_7110&SUBSYS_117C10CF PCI\VEN_1217&DEV_7110&CC_088000 PCI\VEN_1217&DEV_7110&CC_0880 UNKNOWN...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:48.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App