Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Paragon Migrate OS to SSD

10 Oct 2013   #61
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by truckinguy View Post
Quote   Quote: Originally Posted by Kaktussoft View Post
Try to set iator to 3 and iastorv to 0.
reboot but don't change anything in BIOS. Does it boot?
If so.. post screenshot of "device management" again. Is "IDE ATA/ATAPI-controllers" in list, if so expand that branch
I booted fine with msachi at 3 isator at 3 and iastorv to 0

No IDE ATA/ATapi controllers showing just this in my attachment.
intel mobile express chipset sata raid in screenshot...what's th hardware-id? Device Manager - Finding Unknown Devices


My System SpecsSystem Spec
.
10 Oct 2013   #62
truckinguy

Win7 64 Bit
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
why set msahci to 3? set it to 0. I'll gonna search google for what problem can be
I'm sorry for the type error. I had msachi set to 0. I'm tired from working this week so I did check it just now and it's set to 0.

I googled too and didn't see anything that stood out but I'm no tech. I did see stuff about the Intel contoller and DM list. I came out with the IDE/ATA controllers won't show if their not used. Intel has a program to contoller all of them?? Also I read leave it on Raid as Intel has Aschi built in.. very confusing to say the least and my biggest fear when migrating over that I'd have issues. At least it's working and I can feel the speed change over HDD.

Don't know if it's Intel or Dell that is causing this jam or in fact anything can be done about it.
My System SpecsSystem Spec
10 Oct 2013   #63
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Did you try putting msahci, iastor and iastorv all start=3 already?
Answer #61 as well
My System SpecsSystem Spec
.

10 Oct 2013   #64
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

From internet site:
Go into the registry using regedit and change each of the "start" values in the registry keys below from 3 to 0 and this will allow you to change between the different modes by just changing the option in your bios each time you reboot.


HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\servic es\pciide =>irrelevant in your case

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\servic es\msahci =>maybe needed, but setting to 0 doesn't hurt

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\servic es\iaStorV =>maybe not needed, but setting to 0 doesn't hurt

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\servic es\iaStor =>maybe not needed, but setting to 0 doesn't hurt

No you can switch in bios from IDE to AHCI without problems. Switching from RAID is another issue
My System SpecsSystem Spec
10 Oct 2013   #65
truckinguy

Win7 64 Bit
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
system also boots fine if iastor, iastorv and msahci are set to 3 (and bios sill on sata raid)?
sorry for not give you solution yet.

If not booting at all do "system restore"
Don't worry about not solving this... I'll try setting all to 3 later today.. but I installed my HDD I migrated from with OEM values.. This is what the values are from when new from Dell,etc. I never fooled with them before this migrate.

msachi 3
iastor 0
iastoA 0
iastor f 0
iastor v 3
My System SpecsSystem Spec
10 Oct 2013   #66
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by truckinguy View Post
Quote   Quote: Originally Posted by Kaktussoft View Post
system also boots fine if iastor, iastorv and msahci are set to 3 (and bios sill on sata raid)?
sorry for not give you solution yet.

If not booting at all do "system restore"
Don't worry about not solving this... I'll try setting all to 3 later today.. but I installed my HDD I migrated from with OEM values.. This is what the values are from when new from Dell,etc. I never fooled with them before this migrate.

msachi 3
iastor 0
iastoA 0
iastor f 0
iastor v 3
post atapi start value as well as it is now
My System SpecsSystem Spec
10 Oct 2013   #67
truckinguy

Win7 64 Bit
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Quote   Quote: Originally Posted by truckinguy View Post
Quote   Quote: Originally Posted by Kaktussoft View Post
system also boots fine if iastor, iastorv and msahci are set to 3 (and bios sill on sata raid)?
sorry for not give you solution yet.

If not booting at all do "system restore"
Don't worry about not solving this... I'll try setting all to 3 later today.. but I installed my HDD I migrated from with OEM values.. This is what the values are from when new from Dell,etc. I never fooled with them before this migrate.

msachi 3
iastor 0
iastoA 0
iastor f 0
iastor v 3
post atapi start value as well as it is now

Atapi is set at a value of 3.

Here is the chipset info you wanted.


Attached Images
Paragon Migrate OS to SSD-id-chipset.jpg 
My System SpecsSystem Spec
10 Oct 2013   #68
truckinguy

Win7 64 Bit
 
 

OK were I'm at the latest here is I tried..the above regedit values..from post #64. Restarted and it booted to destop. I then restarted and entered bios to change to aschi and it did the same as all other attempts.
It seems changeing the regedit doesn't do much to stop rebooting in Raid anyway.
On a side note I notice in the black start up screen it lists my drives as such..0 ssd 1 WD (which is my storage only and no systems should be on there.) I tried it with DVD in place of the storage drive but no boot either. So I'm leaving the WD storage in for now.
This is what I found about Dells controller at Microsoft community.. I don't want to reinstall too much to do over for me. But too bad there isn't a workaround.
Changing Raid to ASCHI "Probably the only way to fix it would be to reinstall Windows in AHCI mode. The boot drive no longer has the proper drivers when you change the drive mode in BIOS after Windows is installed. You could try a start up repair as well but I don't know that it would succeed since it may not even see the drive(s) at start up.
Richard has the right idea about your problem. Windows may be using different storage drivers for RAID and AHCI modes. Windows will try to load the RAID driver but the driver will not match the AHCI mode and bug check with famous 0x7B (INACCESSIBLE_BOOT_DEVICE). Start up repair will not work because it will not know which driver to load.
The easiest way is to re install the OS with AHCI mode."
My System SpecsSystem Spec
11 Oct 2013   #69
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Did you try putting msahci, iastor and iastorv all start=3 already?
My System SpecsSystem Spec
11 Oct 2013   #70
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Best thing to do (which should fix it).

Put msahci, iastor, iastorv and atapi to start=0. Not all needed but system boots fine. If so:

Make Windows 7 bootable after motherboard swap
Burn the disk and read carefully what to do.

Put BIOS SATA setting to AHCI mode, Boot from the DVD described in that tutorial. Just a few clicks and you're done. Post results
My System SpecsSystem Spec
Reply

 Paragon Migrate OS to SSD




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Used Paragon Migrate OS To SSD (Success):Now Disk Management Confusion
I migrated my Win 7 OS from my 'C' drive to a OCZ Vertex 4 256Gb SSD. No problems, everything works fine. But recently I was in 'Disk Management' and couldn't make sense of what I was seeing:my SSD was showing as drive 'H' with a capacity of 931Gb! Depending on which tool I use, I get...
Hardware & Devices
Free Today - Paragon Migrate OS to SSD 3.0
Giveaway of the Day has Paragon Migrate OS to SSD 3.0 Special Edition Free : Giveaway of the Day - free licensed software daily. Paragon Migrate OS to SSD 3.0 Special Edition (English) - Paragon Migrate OS to SSD 3.0 is the easiest OS migration to new Solid State Drives!
Software
Paragon Migrate OS to SSD 3.0 Special Edition For Free
Hi Guys Found this if anyone is interested, there giving it away for free the next 24 hours - Giveaway of the Day - free licensed software daily. Paragon Migrate OS to SSD 3.0 Special Edition (English) - Paragon Migrate OS to SSD 3.0 is the easiest OS migration to new Solid State Drives! ...
Installation & Setup
Trying to use Paragon Migrate to SSD with a dualboot disk.
I'm trying to replace my 500gb hard drive with a 480gb SanDisk Extreme SSD. I've done it before with my desktop, but this is my laptop, so I can't dual boot with different SSDs. The HD is divided into two with a "vanilla" W7 OS+Office etc, and a W7 and audio programs, and I'm using "Dual Boot...
Installation & Setup
I want to Migrate from Xp to 7 but...
Hope this is the right place. Hello all, I am about to purchase my first Windows 7 PC. But before I do I need help with my current XP system. You see last week I had a nasty malware infection that I thought I got rid of. Well today, the day I'm supposed to buy a new Win 7 pc. My goddamn computer...
System Security


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:31.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App