Processor fan runs very very fast and emitting very very hot air

ahieezer · 05 Oct 2013

Hi,
I am using Laptop 160GB HDD ,GB RAM, AMD TURION N550 processor,

Recently i partitioned my lap through disk management,at that time i changed from basic disk to dynamic disk
From that that time onwards my processor cooling fan runs very fastly from booting time and emitting hot air contiunally.

Even i put a new OS Windows 7 Professional 32Bit, that heat will same.
processor fan runs very very fast and emitting very very hot air.

Some one says that need to change temperature through cmos setttings, but i dont know where the cmos settings for temperature.

Kindly help me, Thanks for Suggestions and solutions

Ahieezer.R

TVeblen · 05 Oct 2013

Start the Windows Task Manager (right click the Taskbar) and go to the Performance Tab. What percentage is the processor running at?

andrew129260 · 05 Oct 2013

Use Speccy - Advanced System Information Tool

This will tell us your temperatures.

ahieezer · 07 Oct 2013

Task manager-performance tab shows-0% or 7% some time 12 %.what can i do now?

ahieezer · 07 Oct 2013

Use Speccy - Advanced System Information Tool

Using this tool i saw

CPU -54 Celcius
HDD- 37Celcius

ICIT2LOL · 07 Oct 2013

Hmm for my two cents worth that is about average temps for a laptop - when you are scanning . playing light games etc.

Shut the machine down and flip it over take a very bright light and look into the air intake where the small fan is see if there is a lot of dust in there. Then keeping the light source where it is on the end where the air is blown out look into that opening and see if the small slots in the "radiator" are very dusty or not or if you cannot see any light at all.
A model number would be handy and the name of the CPU form Speccy.

ahieezer · 07 Oct 2013

The fan is clear and clean no dust and all.
But the processor area is over heating. so fan is just send out the heat.I want to reduce the processor heat.

Please give the solution to reduce the sudden and over heat in processor.

ICIT2LOL · 07 Oct 2013

How old is the machine mate anything over about four years you have got to start thinking the thermal compound may be getting hard and useless. Model number mate please.

ahieezer · 07 Oct 2013

Its a new one manufature date is 25-06-2012

I am using nine months , in that time it never gives any problem,

but last week i was changed my partition , unfortunately one partition was changed from basic to dynamic, after that its required to restart. after restart it was not boot. SO i put a new OS Professional 32 Bit. After puttting new os, The laptop is emitting hot air.

Now i converted all drives in basic disk only. But heat not reduced

ahieezer · 07 Oct 2013

The Below link is full images of laptop

Government Hcl Amd Vision Ltc 02101 Laptop Disassembly ~ Laptop Trouble Tips