DRAM_LED and BOOT_DEVICE_LED is ligthing up when i boot.

Page 1 of 3 123 LastLast

  1. Posts : 125
    Windows 7 Ultimate 64 Bit SP1
       #1

    DRAM_LED and BOOT_DEVICE_LED is ligthing up when i boot.


    i dont know what to do with this. i removed the bad write header hdd.
    the ram is showing 16gb on post. i got a new ssd like 2 months old aprox...

    fresh install of windows 7 couple weeks since i installed it.

    and sometimes when i hit start button and am going to click on my computer. and it auto clicks it for me and when i try to open programs like ccleaner when i eventually got there it opens like 5 of the same tasks and everything keeps blinking.
      My Computer


  2. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #2

    Double check all the settings in Control Panel\All Control Panel Items\Ease of Access Center.
    You could try a different/new mouse too.
      My Computer


  3. Posts : 125
    Windows 7 Ultimate 64 Bit SP1
    Thread Starter
       #3

    its not the mouse. i even use the "windows" key to open the start menu and hovers over something and it opens it. mouse is a steelseries diablo 3 mouse.

    so everything is off or disabled in ease of access center.

    but i can try next time its starts this to deconnect the mouse.
      My Computer


  4. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #4

    Try unistalling the mouse software, I have a steel series Sensei and it caused problems.
      My Computer


  5. Posts : 125
    Windows 7 Ultimate 64 Bit SP1
    Thread Starter
       #5

    ok its uninstalled.
      My Computer


  6. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #6

    And the result?
      My Computer


  7. Posts : 6,741
    W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
       #7

    What colour are the DRAM and BOOT_DEVICE LEDs when they remain lit? And are you actually able to boot when they're lit?
      My Computer


  8. Posts : 125
    Windows 7 Ultimate 64 Bit SP1
    Thread Starter
       #8

    nothing happened yet with the glitching. it happens sometimes when i lock the computer and re log in.
    they are red... i think its not a good thing. i can boot. nothing wrong with that. i have pressed the MEMOK (GO button) but nothing changes.
      My Computer


  9. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #9

    Are you new to using an ASUS board? They have 4 red LEDs which light up in sequence during each boot. In this order, CPU, RAM, GPU, HDD, when the HDD LED goes off it has handed off to the OS and w7 starts. IF an LED stays on and doesn't boot it means there is some issue with that component.

    The Z77 WS work station board uses blue LEDs.
      My Computer


  10. Posts : 21,004
    Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
       #10

    Well my two cents worth have you tried a sfc yet? If not do so
    https://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html
    but do not do chkdsk on the SSD mate.

    If you have not scanned for malware try these


    http://www.superantispyware.com/

    http://www.malwarebytes.org/products/malwarebytes_free/

    http://www.bleepingcomputer.com/download/adwcleaner/

    download from bleeping computer

    delete any crap they come up with

    It might even be worth running the TDSS Killer from this list
    Free Malware Removal Tools
    scanning is purely to eliminate any possibles.
      My Computer


 
Page 1 of 3 123 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 22:40.
Find Us