|03 Nov 2013||#1|
Windows 7 won't boot/come on
I have a Windows Repair Disk and I have tried system restore, system repair, and every other option several times. When I run DISKPART > list volume, it shows all my drives with the status being healthy. I did get one message that I was missing a driver, but I can't find where I wrote it down. I do remember that it had Locale ID: 1033 at the bottom.
I have also run chkdsk and there are no problems. The message at the bottom is:
Failed to transfer logged messages to the event log with status 50.
|My System Specs|
|03 Nov 2013||#2|
Please try the following:
You may want to print these instructions so you can have access to them.
Also, you may want to read them once before you apply them.
Please plug in a USB pen drive into a working computer.
Go to the Farbar Recovery Scan Tool Download
Select the download that applies to your system.
Save the program to the >> USB pen drive.
Remove USB pen drive when done.
Now, go to the problem computer.
Plug in the USB pen drive which has FRST.
Start the computer, and tap the F8 key until you get to the Advanced Boot Options
Use the arrow keys to select the Repair your computer menu item
Select your language settings, and click: Next
Select your User account and click: OK (If you did not set a password, leave blank.)
On the System Recovery Options you get the following options:
Windows Complete PC Restore
Windows Memory Diagnostic Tool
Scan your computer's memory for errors
Select: Command Prompt
In the Command Prompt window, at the blinking cursor type notepad and press: Enter
In Notepad, under the File menu select: Open
Double-click the Computer icon on the left.
Find the pen drive letter, remember what letter it is, click on it, and press: Open
Close out of Notepad.
Click the Command Prompt window
Type x:\frst.exe, or x:\frst64.exe (depending on your system 32-bit or 64-bit), and press: Enter
Note: Replace the drive letter x with the drive letter of your pen drive!
FRST starts, and prepares to run. Follow the prompts.
Click Yes to the Disclaimer.
Press the Scan button.
The scan runs, and, the program saves the FRST.txt, on the pen drive.
When done, click the Command Prompt window, type exit, and press: Enter
Back at the System Recovery Options, press: Shutdown
Remove the USB pen drive.
Plug the USB pen drive in the working computer, and please provide the FRST.txt in your reply.
|My System Specs|
|03 Nov 2013||#4|
Please do the following:
Open notepad (Start > All Programs > Accessories > Notepad)
Copy the entire contents of the code box below (Do not copy the word 'code');
Save it on the flash drive that has FRST and name it: fixlist.txt
start HKLM-x32\...\Runonce: [Del20710677] - cmd.exe /Q /D /c del "C:\Users\Buddy\AppData\Local\Temp\0.del" [x] HKU\Buddy\...\RunOnce: [Del20710677] - cmd.exe /Q /D /c del "C:\Users\Buddy\AppData\Local\Temp\0.del" C:\Users\Buddy\cnmss Canon MG3100 series Printer (Local).dll LastRegBack: 2013-10-21 00:43 end
Running this on another computer may cause damage to the Operating System.
Now, please enter System Recovery Options and select the Command Prompt as done before.
Run FRST64, and press the Fix button, just once, and wait.
The tool creates a report on the pendrive called: Fixlog.txt
Please post the Fixlog.txt in your reply.
|My System Specs|
|Thread Tools||Search this Thread|
|Similar help and support threads|
Dual boot windows vista and windows 7 boot error winload.exe
I am trying to dual boot with 2 different hard drives and 2 different systems. One is Vista x64 and the other is Windows 7 Professional 32-bit. After installing the hard drive with Windows 7 which came from a different computer, I used EasyBCD to configure the boot order. Windows vista still works,...
|Installation & Setup|
Win 7 , Ubuntu dual boot, windows wont boot, startup disk doesnt help
Hi a couple of months ago my system crashed, windows 7 wouldnt boot, and I misplaced my installation disk. I had the problems several times since obtaining the computer several years ago. (Lenovo IDeaPad y450). I attributed the problem to what I believed was a bad hard disk, so I replaced it with a...
Windows 7: Boot Manager Status 0xc000000f, boot selection failed.
Hello, I have a Windows 7 Home Premium 64 bit. Yesterday I accidentally 'killed' csrss.exe. Then, after a bluescreen, my computer restarted and I got the following message: Windows failed to start. A recent hardware of software change might be the cause. To fix the problem: 1.Insert your...
Windows 7 Crashes at Boot Manager after Deleting Windows 8 Dual Boot
Hi all, I followed some instructions to remove the Windows 8 Dual Boot by just deleting the Windows 8 Partition and that there was no need to edit the boot menu as everything will be done automatically after restart. Now, when I tried to reboot my computer, the computer hangs at the screen...
Dual boot Windows 7 pro and Windows Server 2008 - boot loader
Hey guys i installed windows 7 and windows server 2008 in different partition. I first installed windows 7 and then installed windows server 2008.(I dont know if that makes much of a difference). However , -----after installing the server i could not see the windows 7 in my boot loader so i had...
|Installation & Setup|
windows7 wont boot past windows splash screen - will boot to safe mod
WIndows 7 premium home version on a lenovo laptop freezing at splash screen. I can boot into safe mode just fine. Whereby I have to run a system restore back to an older date but the issue still comes back up and this seems to be especially true when trying to wake it from sleep mode. beyond the...
|BSOD Help and Support|
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd
All times are GMT -5. The time now is 15:51.