Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Error about USB3.0 on startup

09 Nov 2013   #11
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

I know noting aboout cable specs... sorry can't help you with that.
Do I comprehend correctly..... usb3.0 ports and devices work fine now (expect the long cable issue)?


My System SpecsSystem Spec
.
09 Nov 2013   #12
truckinguy

Win7 64 Bit
 
 

Yes they work fine now. It was either the virtualization usb and or the fact I had both esata and usb 3.0 cable plugged into the docking station. The manual say's don't connect both. I thought it meant don't connect both to the PC at the same time. Even though the esata wasn't in the pc the fact of it plugged into the docking station with with usb plugged in made it conflcted. I tested this to be true.
Thanks for the replies again. By the way my SSD without ACHI is so fast and benchmarks show very good results.
My System SpecsSystem Spec
Reply

 Error about USB3.0 on startup




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
ASUS M4A89GTD Pro/USB3: USB3 driver issues
Hello and thanks for any help you can provide. I have been having issues with my ASUS motherbord, I recently cleaned and re-formatted my main HDD, after doing this i re installed windows and all my normal drivers, motherboard, cpu, gpu, etc. But for some reason every time I install my USB3...
Drivers
External USB3.0 drive is missing at startup
Hello Windows 7 forum, My computer does not detect my external hard drive when I turn the computer on. Once it's on, if I unplug the drive and then plug it back in again, it detects it and I can use it normally. However once I shutdown or restart the computer, the drive is once again missing. ...
Hardware & Devices
BSOD on startup, unknown error, startup repair running too long
As the title suggests, my Acer Aspire has been running startup repair for over 20 hours following a BSOD yesterday. I'm not sure if it's worth the wait so maybe you all can shed some light. Yesterday I was stressfully trying to search for something (using Chrome) and the website I was on froze;...
BSOD Help and Support
Error 0101003 Keyboard no detected, stuck on startup/startup repair
Hi guys I was cleaning my laptop turned it on and it just wouldn't work so I turned it off and on again and it was giving me this error code saying my keyboard is not detected in start up. It then says there was a problem and shoots me to startup repair where it's just stuck not doing anything. My...
BSOD Help and Support
CMOS Checksum Error Defaults Loaded: Post Transcend TS-USB3 Install
Hi there, I was hoping someone may be able to shed some light on this as it's got me completely stumped, and pretty down at the same time if the truth be told. I'll outline the problem below although the title of the thread may actually be slightly misleading. My system is as follows: ASUS...
Hardware & Devices
USB3 install fail: feature transfer error: 2
I tried installing my NEC USB3 3.0 Host Controller File after a repair/upgrade install. Now, I get the above error during the driver setup. I downloaded the driver directly from Asus. Any ideas on the workaround? Thanks
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:42.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App