powers on but no display, boot, beeps


  1. Posts : 139
    windows 7 ultimate 32-bit
       #1

    powers on but no display, boot, beeps


    i have this pc about 7 yrs. it powers on but no disp. boot beeps, but the fans, hdd, dvd rom works.

    my psu is not branded btw. 540w, and the prob occured when i smelled something burned or toased. i just cant tell surelly.

    note: i have no vcard, also tried reseating cmos. checked the cpu hsf normal temp
      My Computer


  2. Posts : 6,292
    Windows 7 64 Bit Home Premium SP1
       #2

    As you know, something burned out (literally).
    The most likely suspects are the power supply and the motherboard (a component on the motherboard).
    If you can borrow a compatible power supply from someone you can hook it up to test.

    If it is not the power supply then you are most likely looking at a new motherboard. And since this is 7 years old there is a good chance you will not find a new replacement.
    It could be time for a new (or new used) system.
      My Computer


  3. Posts : 139
    windows 7 ultimate 32-bit
    Thread Starter
       #3

    i found a shops where i can replace the components. so i should bring it to them.

    btw my pc specs are
    pentium d 920 3.0 ghz
    512mb 533mhz ddr2 ram
    via p4m800p... mobo
    generic psu 540watts
    80gb seagate baracuda 7200rpm sata 2
      My Computer


  4. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #4

    Along with TVeblen's ideas, also check your monitor on another PC to test it. If you have only onboard video I also suspect the board is bad. Look very closely for anything that looks burned or bare copper traces.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 09:17.
Find Us