Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 32x Locks Up Randomly - SF Diag Tool File Attached

15 Jan 2014   #1
jdUnionngaden

Windows 7 Pro 64bit
 
 
Windows 7 32x Locks Up Randomly - SF Diag Tool File Attached

Hello All -
I inherited a Windows 7 machine because it 'has issues'. I started from scratch and reloaded Microsoft Windows 7 Professional 32x Ver: 6.1.7601 Service Pack 1 Build 7601. It works well except it regularly freezes (i.e. It has no recognition of the mouse or keyboard) randomly: either while Windows 7 is loading (stops at logo screen) or can happen any time while in use. This also occurs when the computer is left ‘on’ or in ‘power down’ (sleep) mode overnight. I have learned, *if it freezes while booting*, this works: Hard shutdown, reboot into Safe Mode then do only a "Restart" and it works fine. Until another random freeze.

I've checked my RAM: All is fine
Check Disk: No Problems

Does anyone have thoughts or suggestions?
Thanks for taking a look at this post.
/jdU


My System SpecsSystem Spec
.
15 Jan 2014   #2
matts6887

Windows 7 ultimate 64-bit
 
 

You say you have checked your ram; but have you run any ram tests on the ram to check if all is functioning correctly?
My System SpecsSystem Spec
15 Jan 2014   #3
jdUnionngaden

Windows 7 Pro 64bit
 
 

Yes I ran Memtest86+ overnight (16 hours) and 8 full passes with no errors.
Any suggestions on what to try next?
Thanks!
/jdU
My System SpecsSystem Spec
.

15 Jan 2014   #4
matts6887

Windows 7 ultimate 64-bit
 
 

How much ram do you have installed in your system and what is the max amt of ram for your system cause it sounds like it's suffering from a lack of ram.
My System SpecsSystem Spec
15 Jan 2014   #5
jdUnionngaden

Windows 7 Pro 64bit
 
 

I just realized I forgot to attach the SF Diag File ... now attached.
From it I extracted this:
Total Physical Memory: 3,070 MB
Available Physical Memory: 1,402 MB
Virtual Memory: Max Size: 6,138 MB
Virtual Memory: Available: 4,448 MB
Virtual Memory: In Use: 1,690 MB

/jdU


Attached Files
File Type: zip SF_15-01-2014.zip (1.02 MB, 1 views)
My System SpecsSystem Spec
Reply

 Windows 7 32x Locks Up Randomly - SF Diag Tool File Attached




Thread Tools




Similar help and support threads
Thread Forum
Win7 Pro 32x Freezes randomly (no BSOD); SD-Diag Tool File attached
Cheers! My profile states Win7 Pro 64x which is my 'home' machine. This post is for another 'work' machine that is 32bit. -- I inherited a Windows 7 machine because it 'has issues'. I started from scratch and reloaded Microsoft Windows 7 Professional 32x Ver: 6.1.7601 Service Pack 1 Build 7601....
General Discussion
Random BSOD (SF diag zip file attached)
I am getting a random BSOD on my dell laptop, it starts up and works fine, but then suddenly a BSOD takes place, even if I am leaving it alone (without working). in safe mode it don't at all appear even if i leave it for a day my drivers are all up to date I did install the windows 2 times, it...
BSOD Help and Support
Random BSOD, SF Diagnostic tool zip file attached.
Hello. I've been getting random BSOD. It doesn't seem to be connected to any one program or situation but usually happens when i'm playing games. I built this computer myself: Asus Sabertooth Z77 MB Intel i5 3.4Gh NVidea GTX 560 GPU 8 Gb Ram I have attached my zip folder for the SF...
BSOD Help and Support
BSOD, likely related to memory corruption; SF Diag dump file attached
Hi all, Thanks in advance for reading; any help is appreciated. Experienced several BSODs during the past few weeks. A few separate "explanations" for the crash shown on the blue screens may suggest a memory problem: "SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION" "BAD_POOL_HEADER"...
BSOD Help and Support
BSOD while shutting down pc, BCCode: 1e (SF Diag tool files attached)
Like the title says i was shutting down my pc couple of hours ago when it suddenly got bluescreen with following error: BCCode: 1e BCP1: 0000000000000000 BCP2: 0000000000000000 BCP3: 0000000000000000 BCP4: 0000000000000000 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1
BSOD Help and Support
Help w. BSOD - SF Diag dmp files attached
Hi, I'm relatively new to Windows 7 but somewhat comfortable around tech. I need help with debugging what seems to be random BSOD's under Win 7. I've attached a zip file using the SF Diag tool and hope that someone on here can help decipher what might be causing this. My initial guess...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 21:14.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App