Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: USB Ports constant problems

11 Nov 2009   #21

Windows 7 Home Premium 64-bit

I have the solution! To start the problem is a update that was released recently. The solution is to reset your motherboard. To reset your motherboard simply turn off and UNPLUG you computer for 5-10 minutes. This lets all the power drain out which turns the motherboard off which is how you reset it. When you turn it back on all of your USB ports should work.

For iPod users:
After going through the process stated above all of my USB drives worked properly except for my third generation iPod touch. I would try to restore it would get halfway through and then suddenly it would stop for five minutes and then it would say an error occurred after unplugging and reinserting none of my drives worked again. Turns out the problem is within the registry. A bad USB registry update causes this problem. I do not know how to specifically fix it but i do know it has to do with the registry. Make sure you do the motherboard reset first though or this will also not work.

My System SpecsSystem Spec

 USB Ports constant problems

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
A few Creative Sound Blaster Z problems. (Sleep Mode, Front Ports)
I have a few issues with my Sound Blaster Z card... The first is that when my computer wakes up from sleep mode the sound stops functioning. In Foobar2000 I get this error message. Unrecoverable playback error: A device attached to the system is not functioning. (0x8007001F) I can't get...
Sound & Audio
Constant BSOD after previous problems
Hi all, Around 5 days ago now I installed a new CPU fan, went to start my PC back up but got no display, I then tried all the obvious things such as resetting the battery and then resetting BIO's to factory defaults but nothing worked, I then remembered that back when I first built the PC I had...
BSOD Help and Support
Constant problems after getting SSD.
I recently got an SSD about a month back (60gb vertex plus) and after installing windows 7 on it I've had constant problems since, the first few days after a clean install are fine, no problems, then I start to get a few symptoms after a few days: -Windows constantly wants to perform CHKDSK on...
General Discussion
constant connection problems
Hello, I've searched in the forum before posting but i couldn't find any solution to my problem. Since i updated to windows 7 ( ultimate 64x ) i've experienced some issues with my internet connection. The connection set at the house is 10mb but the internet speed that reaches to my desktop (...
Network & Sharing
Problems with usb ports and express card slot
Hello, First of all I apoligise if this is in the wrong section, so please move it if it is. Im having massive trouble with my USB ports, I have searched and searched the internet using different search fields and I keep coming across the same answers. My computer knowledge is only that of an...
Hardware & Devices
USB Ports Working Incorrectly, Constant Crash
Specs can be found at: - Gateway DX4720-03 Pentium dual-core E5200(2.50GHz) 4GB DDR2 640GB NVIDIA GeForce 7100 Windows Vista Home Premium 64-bit - Desktop PCs It was a Windows Vista 64, but I upgraded it to Windows 7 64 bit. After that, the USB Ports will recognize things in Windows...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:24.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App