Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Digital Signal

21 Feb 2014   #1
techarchives259

windows professional 64bit
 
 
Digital Signal

I am trying to find an answer to a problem i'm having... I have digital tv and every time I turn my computer on all my channels go out. any ideas? sometimes adjusting the antenna will let 1 channel threw. (always the same channel) I wont have digital tv for much longer but I would still like to learn as to why this is occurring. by the way it has something to do directly when my windows os kicks in. bios does not effect it and I did not have internet for along time an had no wireless signals in the area.


My System SpecsSystem Spec
.
22 Feb 2014   #2
Ranger4

Windows 7 Home Premium 64 bit sp1
 
 

It sounds like interference from the computer. Computers do emit some radio interference which can interfere with your TV. It also sound like you have the TV antenna set up near the computer which will very likely be the cause. The best solution would be an outside antenna, which would be well away from the computer, but as you say you will not have digital TV for much longer, so I assume you are switching to cable TV, so an outside antenna would not be worthwhile.
My System SpecsSystem Spec
22 Feb 2014   #3
techarchives259

windows professional 64bit
 
 

ok thank you for responding, yea the antenna is within 20feet of the computer since I stream everything over to the tv. I just find it weird that only when my OS is loaded I loose the channels, you would think that if the hardware was on then it would make a difference but that is not the case.
My System SpecsSystem Spec
.

22 Feb 2014   #4
TVeblen

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

Are you using a TV antennae to receive over the air broadcast TV?
Or are you using a router?
Is the TV connected to your Home Network to coonect to the internet?
My System SpecsSystem Spec
Reply

 Digital Signal




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
adding missing channels to digital tv signal
Does anyone know the reson that media center 7 does not allow you to add missing channels when using a digital signal. The only channels i seem to be missing that are important to me are espn hd, and just espn hd, regular espn, and espnu and espn2 hd work fine, my comcast broadcast two espn hd...
Media Center
Digital Audio (S/PDIF) Making a Digital Sound with Internet Surfing?
Hi, I've recently switched to Digital Audio (S/PDIF) (High Definition Audio Device) using one Toslink cable instead of all the analog wires going from my PC to my receiver. The digital sound is amazing, CD quality from my PC is great. However, I now also receive the digitized sound of...
Sound & Audio
Video looks like bad digital signal
I made the mistake of trying other things instead of Windows Media Center. I tried this thing called MediaPortal which didn't work, then I uninstalled it, ran CCleaner to get rid of the excess junk because I'd noticed that for some reason, installing it put a software restriction on my Windows...
Media Center
WMC and TV Tuner - No Signal / Too Weak a Signal
I have owned several TV Tuners in the past and this is the first OS that has given me problems. I have a Hauppauge WinTV-HVR-1950 (USB 2.0hs) and cannot get a picture from my Cox Cable Service in Orange County, Southern CA. Installed the 64bit driver from Hauppauge. According to Device...
Media Center
Digital Concepts Digital Camera
I just purchased a new digital camera and when I went to install the driver cd that came with it, it said the driver is not compatible with my version of Windows (7). Is there anyway that I can find a new driver? I'm not very knowledgable with drivers and if this possible. Or if not a driver is...
Drivers
No TV Signal
I am currently have a hauppauge 950Q tuner hooked up to my windows 7 computer. I have been having a problem where after about watching tv for about 6 minutes in windows media center it says that i have no tv signal and the image stops. It then says something about low bit rate. I would really like...
Media Center


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App