Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win 7 Reinstalled - can't find my old storage RAID 0

06 Apr 2014   #1
Modular

Windows 7 Ultimate x64
 
 
Win 7 Reinstalled - can't find my old storage RAID 0

Hi all,

I recently had to reinstall Windows 7 on my SSD and can't get the fresh install to "see" my RAID 0 array that I've been using for storage. Here's my setup:

SSD - Windows 7 =x64
Samsung Spinpoint F3 (2) - RAID 0
Biostar TA790GX 128M - using hardware RAID

The hardware is all the same, not one thing has been changed except that the SSD now has a new Windows install.

The BIOS can see the RAID array but the fresh install of Windows can't. I'm at a loss. When I installed Windows, I left the BIOS settings on RAID.

Thank you for any help.


My System SpecsSystem Spec
.
07 Apr 2014   #2
Modular

Windows 7 Ultimate x64
 
 

Figured it out. The mobo driver wasn't installing the RAID drivers. I had to go to device manager and click install driver, then manually tell it to search the install CD. All is up an running!
My System SpecsSystem Spec
Reply

 Win 7 Reinstalled - can't find my old storage RAID 0




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Intel® Rapid Storage Technology (RAID) driver v11.7.0.1013.
New IRST v11.7.0.1013: 11.7.0.1013 Production Version Release Notes Official Intel v11.7.0.1013 Driver I do not know if you're like me that has the IRST v11.2.0.1006 version driver on their machine for a while (iaStor.sys), but couldn't successfully install the v11.6.0.1030 (iaStorA.sys &...
Drivers
RAID 5 switched from single storage to raid 5, lost drive letter
I am running 7 pro 64bit on a ASUS p8p67 deluxe mobo and I copied all data from my 1tb storage D: drive to a backup external and proceded to install raid 5 with 3 single 1tb drives and the raid is up an running. However using Intel Rapid Storage Technology to setup the raid inside windows I had to...
General Discussion
Intel Matrix Storage Controller and Raid Timeout
Hi, I am going to be getting 2 new WD10EALS drives in the next day or so. My plan was to put them in raid using the onboard ICH10R controller on my mobo (an ASUS Sabertooth X58). I had wanted to run WDTLER to turn TLER on, but after reading some reviews it seems I might not be able to as it is...
Hardware & Devices
Setting up a RAID storage array
I currently have win7 x64 installed, i have a 320GB partitioned for a dual boot, XP and win7, then i have a 1.5TB storage drive which is filling up, im thinking of getting 2 or 3 1TB drives to create a raid array(0 or 5, not sure whether to have fault tollerance or not). if i were to start with...
General Discussion
Can't find RAID driver
Hi! I've recently bought ST-Lab A142 PCI ATA 133 IDE Card to make RAID to make RAID from my 2 HDD drives 60GB each. It comes with a cd on which there are drivers for win 2000/xp/vista 32/64bit. But no mention of Win7. I am trying to install win7 x64 on this RAID but it doesn't see RAID. I've...
Drivers
Windows 7 can't find RAID HDD?
When I try to run the installation for the beta build of Windows 7 it tells me that it is incompatible and I need to reboot the computer and install it from there. So I set my DVD drive as primary, ran the installation but it won't find my installed RAID driver (PATA drive installed on PCI card)....
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 07:29.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App