Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Failing PSU?

03 May 2014   #11
PSCO2007

Windows 7 Professional X64
 
 

I'll post that -does this help?

Where is the Sensor info on Hw program?




Attached Thumbnails
Failing PSU?-sensor-pic.jpg  
My System SpecsSystem Spec
.
03 May 2014   #12
PSCO2007

Windows 7 Professional X64
 
 

Quote   Quote: Originally Posted by carwiz View Post
That's not the temperature/voltage area. You need to show the sensors window.

It will look similar to this:
Sorry - can't seem to find that window.
My System SpecsSystem Spec
03 May 2014   #13
carwiz

Windows 7 Pro-x64
 
 

You should get a small window on start up. You can check the run sensor only or you can click on the configure button to set the start options


Attached Images
Failing PSU?-hwinfo1.jpg 
My System SpecsSystem Spec
.

03 May 2014   #14
carwiz

Windows 7 Pro-x64
 
 

The voltages in your display look ok but it's only a snap shot of the current values.
My System SpecsSystem Spec
03 May 2014   #15
PSCO2007

Windows 7 Professional X64
 
 

Ok - thanks.


Attached Thumbnails
Failing PSU?-sensor-pic2.jpg  
My System SpecsSystem Spec
03 May 2014   #16
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

See this pic

Oops sorry didn't know you had posted!


Attached Thumbnails
Failing PSU?-hwinfo-get-rid.png  
My System SpecsSystem Spec
03 May 2014   #17
carwiz

Windows 7 Pro-x64
 
 

Quote   Quote: Originally Posted by PSCO2007 View Post
Quote:
Go into the BIOS and see if Restart on Power Loss is set
Couldn't find such a setting.

Not on UPS.

Called thermaltake and they said it probably is caused by the hot swap bay (built-in to Case), some sort of of conflict. They also said the PSU might be failing.

If I disable hot swap controller in BIOS, the problem disappears, but I NEED the hot swap and would just as soon put the computer to Sleep.

When I ran Powercfg -devicequery wake_armed- it said USB controller.
You might check the motherboard site and see if there's a BIOS update.

Also, is there a BIOS manual. I've never had a PC that didn't have the Restart on Power Loss option.
My System SpecsSystem Spec
03 May 2014   #18
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Carwiz mate PSC should be able to scroll down to the PSU volts in that screen and watch them and snip them for that matter.
My System SpecsSystem Spec
03 May 2014   #19
PSCO2007

Windows 7 Professional X64
 
 

Quote:
You might check the motherboard site and see if there's a BIOS update.
I did a BIOS update last week.

So, in your opinion, is the PSU OK?
My System SpecsSystem Spec
03 May 2014   #20
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

The 5v rail seems a tad low but otherwise no bad.
My System SpecsSystem Spec
Reply

 Failing PSU?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
I think my HDD is failing , PLEASE HELP
Everytime I turn on my laptop this shows up : Checking file system on c: file system is ntfs One of the disks have to be checked for consistency. First I let it finish but then it didn't show anything so I shut down my laptop by holding the power button. Now everytime I turn on my laptop i...
General Discussion
Is My HDD failing
Is My HDD failing Hello All, 2 days ago i installed a new Hitachi Deskstar 7K3000 3TB 7200RPM, Im using it solely for playing all my loss less music. Its seems to be chugging along nicely until i ran...
Hardware & Devices
DNS keeps failing
Hi, I bought a new router that was a Netgear DGND3300v2, this was replacing a previous Netgear which was continuously cutting out (because it was 2 and a half years old). I setup the router fine as am using the connection now, but on frequent occasions it reports my DNS is unavailable. This is...
Network & Sharing
PSU Failing?
Hey guys, I got a new graphics card the other day, went from a HD 5850 to a GTX 560ti OC'ed edition. My PSU was quiet as quiet can be when gaming with the old GPU but now the PSU is making a whining noise, not mega loud but loud enough that you can hear it. Only happens with gaming. ...
Hardware & Devices
Failing SSD ?
Hi guys is there any way to tell if my SSD is failing? I have had so many problems recently with it I have had to re-install Windows at least 8 times as it has some how got corrupted it randomly reboots and then the memory dump fails and I try to reboot only to get the message that Windows can not...
Hardware & Devices
something must be failing?
ok so, a couple of weeks back the pc started to flash up error messages on boot. such as - bootmgr is corrupt system cannot boot -a disk read error occurred. press Ctrl+Alt+Del to restart - (block of text) status: 0xc00000e9. info: an unexpected I/O error has occured - BSOD - stop:...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:55.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App