Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Black screen of death :( Help!

29 May 2014   #31
pushkar1989

Uttar Pradesh
 
 

Here it is..PAZ-PC-Thu_05_29_2014_200628_38.zip




My System SpecsSystem Spec
.
29 May 2014   #32
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

You seem to reluctant to supply the data necessary to troubleshoot your issue.

If what you stated about the system temp and the PSU in post #28 is true (we cannot verify, as you did not upload the necessary data as per post #27), then it is your GPU that is failing.

You are getting stop 0x124 BSODs.
Code:
BugCheck 124, {0, fffffa800ae888f8, 0, 0}

Probably caused by : AuthenticAMD

Followup: MachineOwner
---------
WoW!! nvidia 9800GT as per system specs, EVGA GeForce GTX 560 Ti DS Superclocked as per the original post #1, ATI Radeon HD 4250 as per the uploaded data; which is actually valid. Why so much differences in information? Have you tried alternate GPUs? And the situation is the same with them all?
Code:
---------------
Display Devices
---------------
          Card name: ATI Radeon HD 4250
       Manufacturer: ATI Technologies Inc.
          Chip type: ATI display adapter (0x9715)
           DAC type: Internal DAC(400MHz)
         Device Key: Enum\PCI\VEN_1002&DEV_9715&SUBSYS_843E1043&REV_00
     Display Memory: 3064 MB
   Dedicated Memory: 252 MB
      Shared Memory: 2811 MB
       Current Mode: 1920 x 1200 (32 bit) (59Hz)
That's confusing. Please answer this question, and upload the Speccy snap to proceed further.
Edit: Well, now I understand it. But the speccy shot is needed. As the computer is about 4 years old, the temperature is a must to know to troubleshoot a stop 0x124.
My System SpecsSystem Spec
29 May 2014   #33
pushkar1989

Uttar Pradesh
 
 

HI

Okay I will upload the temp in few hours if possible as I am away from my system.

And when have you seen " stop 0x124." means at which date?

About my GPU, my onboard has AMD 4250, and 4 years back (i.e. I have started my system with this GPU) I have 9400 GT and after 2 years (I guess) which I have replace with 560ti.
Now I am on stock GPU (AMD 4250) and I have deleted my Nvidia drivers using
Display Driver Uninstaller 12.8.2
in safe mode.
Let me know if this thing is resolved?
My System SpecsSystem Spec
.

29 May 2014   #34
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

My question about display is solved.

Stop 0x124 continued from 20/02 to 15/05. But you are having display crashes even after that.

It also appears that the stop 0x124 stopped after changing the GPU to the onboard one; but display issue continued. Now the question is..... what may be the reason behind it.

So the possibility of overheating and inadequate power supply by the PSU appears. Improperly seated hardware components or any loose connection also may cause it.

As on 29/05 ....
Quote:
Event[56427]:
Log Name: System
Source: Service Control Manager
Date: 2014-05-29T13:04:03.679
Event ID: 7026
Task: N/A
Level: Error
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: paz-pc
Description:
The following boot-start or system-start driver(s) failed to load:
AsIO
cdrom
discache
MpFilter
spldr
sptd
VBoxDrv
VBoxUSBMon
Wanarpv6
AsIO is ASUS PC Probe utility. A bloatware by the motherboard manufacturer. Uninstall it ....
Code:
Start Menu\Programs\ASUS\PC Probe II
Another more vital one ....
Quote:
Event[56393]:
Log Name: System
Source: sptd
Date: 2014-05-29T13:03:33.587
Event ID: 4
Task: N/A
Level: Error
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: paz-pc
Description:
Driver detected an internal error in its data structures for .
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Daemon Tools at first.
Code:
Start Menu\Programs\DAEMON Tools Lite
Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
  • Double click to open it.
  • Click this button only:
  • If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Over last few days, all your disks are having controller errors. An example:

Quote:
Event[47209]:
Log Name: System
Source: Disk
Date: 2014-05-24T13:33:18.936
Event ID: 11
Task: N/A
Level: Error
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: paz-pc
Description:
The driver detected a controller error on \Device\Harddisk2\DR4.
But the controller is system native PCI IDE controller, which should not fail. And, this failure may cause the blackouts as you have experienced.

If the situation remains the same even after uninstalling Daemon Tools and PCProbe, you may need a dismantle and re-seating. And that is another place where the information ablut the system temp will be vital.
My System SpecsSystem Spec
29 May 2014   #35
mohavepc

Windows 7 Professional x64
 
 

Here is a suggestion I have not seen posted here yet. Arc has found that several hard disks are throwing errors. My suggestion is this. Even though you have tested the OS disk with WD tools does not mean another drive is not causing issues. Am I to assume you are using the extra disks to store data for Adobe ect? I would remove connection to all but the OS drive then run Prime95 again. If it does not black out you could have an issue with one of the other drives throwing errors. If it does Black out then I would hazard that the PSU if beginning to fail.
My System SpecsSystem Spec
30 May 2014   #36
pushkar1989

Uttar Pradesh
 
 

HI

I have installed a fresh copy of Windows on my other drive with no software added. I installed only chipset and mobo important drivers and After effects to check black screen. I render a video and got black screen. (2 days back).
Today I run Prime95 and got black screen, temp was fine on HQ monitor.
Then I use your dm collector and gathered the data and see attached. PUSH-PC-Fri_05_30_2014_125506_59.zip

I think driver/software is not a issue.

Speccy : http://speccy.piriform.com/results/D...cITlRKb2muSNvL
Edit: I have run Speccy on my old installed windows, and attached zip is the new installed windows.
If you need new windows installed Speccy let me know.


My System SpecsSystem Spec
30 May 2014   #37
pushkar1989

Uttar Pradesh
 
 

Quote   Quote: Originally Posted by mohavepc View Post
Here is a suggestion I have not seen posted here yet. Arc has found that several hard disks are throwing errors. My suggestion is this. Even though you have tested the OS disk with WD tools does not mean another drive is not causing issues. Am I to assume you are using the extra disks to store data for Adobe ect? I would remove connection to all but the OS drive then run Prime95 again. If it does not black out you could have an issue with one of the other drives throwing errors. If it does Black out then I would hazard that the PSU if beginning to fail.

HI
I have tested my both HDD with prime and it shows blacks screen.
Where have you seen the errors?
My System SpecsSystem Spec
30 May 2014   #38
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by pushkar1989 View Post
HI

I have installed a fresh copy of Windows on my other drive with no software added. I installed only chipset and mobo important drivers and After effects to check black screen. I render a video and got black screen. (2 days back).
Today I run Prime95 and got black screen, temp was fine on HQ monitor.
You have done a good job.

Vanilla windows installation, onboard graphics, and still Display crash.

Specially when the temperature is totally under control.

Black screen of death :( Help!-2014-05-30_181403.jpg

A lot of factors got minimized by this way. And, now it is also sure that it is a hardware issue.

So let us do some further steps.

First make it sure that there is no loose connection or improper seating of the hardware. Do a dismantle and re-seating. No need to open the CPU and heatsneak; otherwise you will need to apply some thermal paste while reseating those.

Then try to replicate the issue. Does it still continue? If so, apply any other PSU and see how it goes.

Does it cause the same display crash even after changing the PSU? Let us know.
Quote   Quote: Originally Posted by pushkar1989 View Post
Then I use your dm collector and gathered the data and see attached. Attachment 319806

I think driver/software is not a issue.
No new crash dump is there, that means it was not a BSOD but only a display crash. And, we can certainly assign the issue to hardware. Still, as you made a clean install, better you upload the essential drivers and windows.

Quote   Quote: Originally Posted by pushkar1989 View Post
Speccy : http://speccy.piriform.com/results/D...cITlRKb2muSNvL
Edit: I have run Speccy on my old installed windows, and attached zip is the new installed windows.
If you need new windows installed Speccy let me know.
It will not make a difference, cause it is system temperature, irrespective of operating system.

Quote   Quote: Originally Posted by pushkar1989 View Post
Quote   Quote: Originally Posted by mohavepc View Post
Here is a suggestion I have not seen posted here yet. Arc has found that several hard disks are throwing errors. My suggestion is this. Even though you have tested the OS disk with WD tools does not mean another drive is not causing issues. Am I to assume you are using the extra disks to store data for Adobe ect? I would remove connection to all but the OS drive then run Prime95 again. If it does not black out you could have an issue with one of the other drives throwing errors. If it does Black out then I would hazard that the PSU if beginning to fail.

HI
I have tested my both HDD with prime and it shows blacks screen.
Where have you seen the errors?
Prime is used to test the CPU.
Your HDDs are WD and Samsung, so you need WD Data Lifeguard or Samsung HUTIL to test those.

We have noticed the errors in your system logs. Within last two weeks.


My System SpecsSystem Spec
30 May 2014   #39
pushkar1989

Uttar Pradesh
 
 

HI

I have checked for the loose connection, there is no problem. It is well placed.

I have tested this using normal Intel 450W PSU with no GPU added, and got the same Black screen.
I have even tested my Seasonic PSU with multimeter and reading was stable.

About HDD: Maybe that error was because of non normal shutdown? (Don;t know the term of that )

But I have used WD Data Life Gurad, andit says PASS. Can you tell me for which section should I run that. It has many settings.

What comes in my mind is the mobo may be gone faulty as it is 3 years old.
My System SpecsSystem Spec
30 May 2014   #40
mohavepc

Windows 7 Professional x64
 
 

What do the Capacitors on the Motherboard look like? See any that are bulged or leaking?


Attached Images
Black screen of death :( Help!-th.jpg Black screen of death :( Help!-badcap.jpg 
My System SpecsSystem Spec
Reply

 Black screen of death :( Help!




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Black Screen of Death true black no keys work at all!!!HELP
i believe virus deleted a system 32 exe file it is a confident guess. I have a true black screen nothing at all comes up doesn't load anything no hot keys work. windows 7 hp laptop I need to know if I can get into bios if f keys don't work, cd repair disk don't work. what can I do power button and...
BSOD Help and Support
Black Screen of Death during boot, before login screen
While attempting to restore a previous backup of my system (with Norton Ghost 15), I got an error, and the system rebooted. Upon reboot, I get the black screen of death with just the cursor instead of the usual login screen. I have tried the following thus far: These all give me the black...
BSOD Help and Support
Black Screen of Death or Black Gaming Screen of Death
Hi My first time I had this BlackSOD problem was while playing BF3 , a few months ago, one day all good , next BlackSOD , the only way out, was a reboot , as keyboard and mouse where non- responsive. The only thing I had done was install an ATI 13.1 beta driver. I got rid of it and went for...
BSOD Help and Support
Black Screen of Death with Mouse Cursor before Login Screen
The issue started a few hours ago when I was playing League of Legends, specifically when the game has finished its loading and crashed to Desktop which is a common problem on my laptop. As usual I would restart the game, but before I could do that explorer.exe crashed, my entire Desktop has turned...
BSOD Help and Support
BLACK screen of death!!!
Sorry about the title, just saw alot of BSOD threads, and I guess it was just my attempt at a bad pun.:D Anyways, jokes aside, the problem is pretty serious; I'll try to explain it to the best of my abilities, although it's a pretty weird one: It all started yesterday, while I was watching...
BSOD Help and Support
Black Screen of Death/Blue Screen of Death
Hello everyone. I have a Toshiba Satellite L450D-13X computer for the kids, and for the price it's a good laptop. Have had no issues with it until two weeks ago when the screen froze for the boys whilst playing a game and downloading a program from the net. Had to do a force shutdown and since...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:49.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App