Bios help needed please required help with hardrives

ohsocute69 · 11 Jun 2014

I run a msi -760GM-P23 motherboard , the issue is this i have 3 hard drives i have set the bios setting to boot to which hard drive first.

I can disable two of them but when i load my 3rd hard drive and check c programs i can see the files from the other hard drive even tho they have been disabled.

Is there a way i can disable the hard drives in bios?. so it will close them so you cant see the other hard drives if there... in cprogramme folder?

I really dont want to put the power cable source cable out of two hard drives all the time ..
ok thanks

ignatzatsonic · 11 Jun 2014

ohsocute69 said:

I can disable two of them.....

How have you been disabling them so far?

ohsocute69 · 11 Jun 2014

ignatzatsonic said:

ohsocute69 said:

I can disable two of them.....

How have you been disabling them so far?

opening the side case everytime removing the power cord and the other cable , from the back of the harddrive , but then i was ready to but a new pc only to find that the cables after a month were worn and not clicking in correctly from the amount of removing in this time.

So there must be a way to leave all cables on set it in bios so that you can disable the hard drive , and run one hard drive with out seeing the other hard drive files , when going to c drive. on that one working hadrive.

ignatzatsonic · 11 Jun 2014

You can disable hard drives in Device Manager.

I've never done it, so I can't tell you if that will do exactly what you need.

ohsocute69 · 11 Jun 2014

ignatzatsonic said:

You can disable hard drives in Device Manager.

I've never done it, so I can't tell you if that will do exactly what you need.

this will still show the (files) as there is power to the hardrive , there must be a way to set this so it stops the other files from showing when you have one hard drive running only , even if they others are connected.