Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: hard disk labeled as bad disk, can solve??

23 May 2014   #1
veron

vista
 
 
hard disk labeled as bad disk, can solve??

hi jumanji,

Hi I'm having the same problem with both Jenny and I tried doing this with your method but my disk drive is labelled "Bad Disk" under File System and I can't get it to find the partition. How can I resolve this problem? Please advise

thank you


My System SpecsSystem Spec
.
23 May 2014   #2
jumanji

Windows 7 Home Premium 32 bit
 
 

Hi veron,

Welcome to Seven Forums.

From the many user experiences here, I have come to the conclusion that if Partition Wizard shows a disk as Bad Disk, there is actually nothing much we can do.

But still to leave nothing to chance, I would recommend

1. Check your disk condition with the HDD manufacturer's diagnostic/repair utility. If it does not pass the test well it is a goner.

2. Notwithstanding, try running PhotoRec and make an attempt to recover the folders/files. If PhotoRec fails to recognise and show your drive well that is it.

Guide to using PhotoRec recovery software.

3. The final act: Try to format your drive with HP USB Disk Storage Format Tool v 2.2.3

HP USB Disk Storage Format Tool Free Download (Right click on the *.exe file and run it as administrator.)

(If it would format it successfully, we can still recover the data from a formatted disk. But that is a big IF.)
My System SpecsSystem Spec
25 May 2014   #3
veron

vista
 
 

hi Jumanji,

thank you for your prompt reply,

i shall try all ur recommendation, huuu so desperate and upset if i could not recover the hard disk as all my files and photos will be gone hahaaa
anyway thank you so much for your help Jumanji,
My System SpecsSystem Spec
.

26 May 2014   #4
jumanji

Windows 7 Home Premium 32 bit
 
 

I had seen your other post - which existed only for a shortwhile - and could understand how desperate you are to retrieve the data.

There is absolutely no bar in trying to retrieve your data using any of the free data recovery software. Just google search "best free data recovery software" or related terms and you can find many.

However, for the first time, I would suggest that you perform the data recovery on a cloned drive and try your luck.

Best method/tool for cloning a failing HDD for Data Recovery?

From post #12 there modified slightly:

Tool: ddrescue Source: SystemRescueCD

1. Download the SystemRescueCD from Download - SystemRescueCd systemrescuecd-x86-4.2.0.iso 380MB and create a bootable pendrive with that ISO using Rufus Rufus - Create bootable USB drives the easy way

2. Boot your computer with that pen drive with your source disk (your failing disk) and a destination disk (formatted empty disk of capacity not less than that of your source disk) plugged in.

3.Against the command prompt type: fdisk -l [ENTER] This will list all your drives. Note the nomenclature of your source disk and destination disk. The option is lower case L = l and not one 1

4. Next against the command prompt type: ddrescue -r3 -n -v /dev/sdb /dev/sdc recovery.log [ENTER]
( Note: ddrescue[space]-r3[space]-n[space]-v[space]/dev/sdb[space]/dev/sdc[space]recovery.log

Note: Replace sdb and sdc with the correct device nomenclature of Source disk and Destination disk as obtained in step 3.

5. Sit back and relax. The cloning process may take days depending upon how bad your Source disk is. If your data is important patience is the key and the wait worth it. The saving grace is you can stop the process any time with Ctrl -C and then restart. It will take the cue from the log file and start from where it left

Once your BAD Disk is cloned perform any data recovery including PhotoRec which I recommended on the cloned drive.

Good luck.
My System SpecsSystem Spec
05 Jul 2014   #5
wizbobby04

windows 7 ultimate 32-bit
 
 

hi jenny have you heard about the HIRENS 15.1
1. download hirens 15.1 and burn it to cd
2. Boot from hirens 15.1 CD then select dos programs look for HDAT2 software
3. then read the remaining instructions it will repair your hard disk bad sectors and try to fix it
NOTE: the scanning and repairing process of Bad sectors will depend on how damage cost on your hard disk if it counts too slow your hard disk is bad it will stop and a beep sound when bad sectors detected... it works for me...95%
My System SpecsSystem Spec
Reply

 hard disk labeled as bad disk, can solve??




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Confused about installing Windows on my hard disk,hard disk problem
Hi guys, I will try to explain this as simple as i can.So let's start I have laptop ASUS N75SF and it is a year old,so i have decided to format.I have two separate hard disks that are the same brand,SeaGate 9500423 AS, each 500 gb capacity. Before i decided to format , one of my hard...
Installation & Setup
Host disk is running out of room, can't shrink virtual hard disk?
Hi Everyone, I have a challenge with resizing a virtual disk - here are a few details before I plunge into the challenge at hand; 1). The HOST O/S is Windows 7 x64 2). The GUEST O/S is Windows XP 3). The Desktop Virtualization software is VMware Workstation 8 Background - originally when...
Virtualization
optical disk installation of Windows 8 after a hard disk crash
I am preparing for a hard disk crash. I purchased a new PC with Windows 7 in June 2012. It came with a Samsung optical disk containing Windows 7. I am eligible for the $14.99 USD upgrade to Windows 8. Will there be an installation disk for Windows 8 available at this price and if not, then...
Installation & Setup
How can I solve hard disk problem?
The one that highlighted is different from the one that i've circled. Can someone explain to me why is that happened? I'm searching for the 100^GB more. Originally the HDD contains 290GB. :confused:
General Discussion
hard disk boot failure insert system disk press enter
hi sir,im vijay.. im usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk ...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get...
General Discussion
Hard Disk space seen as occupied... But disk is empty inside
Hi 1. I have Win7 64-bit installed. 2. Earlier I installed MySQL and created database (size: 2 GB) in my D: drive (size: 52.8 GB). 3. Then I formatted my C: drive and installed Win7 again. As a result, MySQL got uninstalled and something happened to the database in D: drive. 4. After...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:09.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App