Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: How do I stop identical WD USB drives showing as the same drive letter

21 Aug 2014   #1
AussieColin

Windows 7 Home Premium 64bit
 
 
How do I stop identical WD USB drives showing as the same drive letter

I've bought three WD 3Tb Elements external USB 3 drives (they were on special). The problem is that Windows 7 is not seeing them as separate drives. If you plug in one then the next one simply doesn't appear, either in My Computer or in the Disk Management utility.

This has happened to me before (with two identical 2Tb WD Elements drives) but I was able to fix the problem by manually assigning drive letters to each one. Once I did that they were recognized as separate drives. Unfortunately this doesn't seem to be working with these ones.

Specifically:
  • I plug in drive #1 and assign it the drive letter S.
  • I then unplug it and plug in drive #2. It appears also as drive S (this is what normally happens).
  • I manually assign this second disk the drive letter T.
  • What SHOULD happen at this point is that when I now plug in the first drive again it will still have drive letter S and the two will both show. Instead only one of them will register at a time and they both now (separately) show as T. Both in My Computer and in Disk Management the second is simply invisible.

Any ideas? How do I make the drive letters 'stick' to their drives as I've been able to with other similar drives in the past?


My System SpecsSystem Spec
.
21 Aug 2014   #2
jumanji

Windows 7 Home Premium 32 bit
 
 

This happens because all the three drives have the same Unique Id.

Connect all the three drives and go to Windows Disk Management.

Only one drive will get the drive letter and the other two may be offline because of the signature collision.

Right click on the drives with a red arrow pointing down and bring them online.

How do I stop identical WD USB drives showing as the same drive letter-21-08-2014-21-16-50.jpg

Plug out the drives and plug in. Now all the drives will get a different drive letter.

EDIT: You may also check and change the Unique ID of the drives using diskpart. http://www.laurentkempe.com/post/Win...collision.aspx


My System SpecsSystem Spec
21 Aug 2014   #3
AussieColin

Windows 7 Home Premium 64bit
 
 

Thank you! Worked perfectly. I hadn't scrolled down far enough in Disk Manager to see that the second drive was appearing, just marked as "offline". Now that I know the extra step I'll be good the next time I run into this. :-)
My System SpecsSystem Spec
.

21 Aug 2014   #4
jumanji

Windows 7 Home Premium 32 bit
 
 

Glad I could help. This is a common problem when you buy the same brand drives in bulk.

Just for your interest you may see these threads.

Two Seagate External Drives, one not recognised

How to make Windows assign the same drive letter to all externals

The second recent one is of course my baby and reverse engineering.
My System SpecsSystem Spec
Reply

 How do I stop identical WD USB drives showing as the same drive letter




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
USB Thumb Drives not recognised (not drive letter)
Hey, I have an interesting problem with SanDisk Cruzer Blade & Edge thumbdrives. Whenever I put them in my computer, I get the sound that Windows has detected I have plugged something in, but nothing appears. I go into Computer Management -> Disk Management and they aren't listed at all. ...
Hardware & Devices
Disc drives unvisible (no drive letter)
I just formatted and installed afresh Win7 Ultimate N on a WD1000GB. Since setup screen it recognized only 3 of 5 disk drive (all of same HDD). Before that I resized two of the drives with `EASEUS Partition Master 8.0.1 Home Edition` but I did so for the drives he actually recognized. (I accessed...
BSOD Help and Support
Drive Letter not showing up in disk management
My External Drive is normally assigned the letter G, however when I plugged in it now it was assigned H. Looking in Disk management, G does not show up in the list of letters available to change the assigned letter to, and it does not appear in disk management as being assigned to any drive I...
Hardware & Devices
Changing the drive letter for DVD Drives?
So I know that going into disk management allows me to change the letter assignments for hard drives and such, but there are no dvd-drives listed there. Where do I go in win7 to change the drive letters for my installed burners?
General Discussion
Hard Drives - Lock a Drive Letter
How to Lock a Drive to a Specific Letter This tutorial will show you how to lock a drive into a specific letter Most external hard drives will switch to the earliest available letter. This can be a problem if you want to create a shortcut to a file on that drive and use it after...
Tutorials
Drive letter not showing up as available
hi all, I just installed windows 7 rc. I have two hard drives in my system. The first has two partitions, the boot partition and a logical drive. The second hard drive has a single partition on it. windows assigned the 2nd hard drive the letter "d". I have a lot of data on there that a...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:28.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App