Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: HWmonitor Voltage diagnosis (duno if values are correct)

30 Aug 2014   #41
TVeblen

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

It would be best if you could explain the problem in detail. "Small buzz sound and small freeze" does not mean anything in a diagnostic sense.

When does the problem occur? During start up? While using the PC?
Constant and predictable, or random?
Where is the sound coming from?
Explain the freeze - what happens?
Run the PC in Safe Mode. Does the behavior happen there?


My System SpecsSystem Spec
.
30 Aug 2014   #42
Denisgsv

64 windows 7 ultimate
 
 

during use of the pc , single youtube/twitch video makes iit happen once each 3-5 minutes . Launching something Else like hearthstone mmakes it happen quite often .

Constant yes , prredictable sort of , more video games tabs makes it happen for often .
From speakers , if its setted on headphone mini lags stuttering happens but no sound .


How to explain the buzz and sound . Wwell , its similar to lagging , system becomes unresponsive for really small periods of time but noticeable , with the "buzz" sound .

Swaped 560ti back .... no problem , it happens only with 770 gpu :|

trryed find a video :
https://www.youtube.com/watch?v=CF9Pvdsz0UM

1.28 , 2.00 . And after happens a few times . THATS exactly what i have ... tho its easier to add a game to video/audio pllayback to make it happen more often
My System SpecsSystem Spec
30 Aug 2014   #43
Denisgsv

64 windows 7 ultimate
 
 

Quote:
1.GO TO MY COMPUTER / RIGHT CLICK
2.PROPERTIES
3.HARDWARE
4.DEVICE MANAGER
5.IDE ATA/ATAPI controllers
6.UNINSTALL ALL IN IDE ATA/ATAPI controllers
7.Restart/Reboot your pc
8.Done Sound AND Mouse Lag IS removed And sound choppy is removed
does this make any sense ? Wouldnt trust a random youtube guy :|
My System SpecsSystem Spec
.

30 Aug 2014   #44
Denisgsv

64 windows 7 ultimate
 
 

also , 770 takes 1 8pin conector and 1 6 one .

the one i use is 8 pin in the PSU , then it doubles into two exits of 6+2 6+2 . So i use only this single cable with 3 exits 1 for psu 2 for gpu ... Should i use two instead or one like this should be enogh ?
Im not sure of anything
My System SpecsSystem Spec
30 Aug 2014   #45
TVeblen

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

No, I'm not sure what reinstalling the devices in IDE ATA/ATAPI controllers will do to solve your particular problem. But if you wanted to try it anyway, those basic devices and drivers will reinstall themselves on the next startup.

You say this problem goes away when you use the 550ti. That is a nVidia card right? It would be helpfull if we knew the full product model number of both cards.

The 770 will probably use more power than the 550. What are you using for a power supply?
My System SpecsSystem Spec
30 Aug 2014   #46
Denisgsv

64 windows 7 ultimate
 
 

Geforce 560 ti palit ::Products - GTX 560 Ti (1024MB GDDR5)::
Asus GTX770-DC2OC-2GD5 GeForce GTX 770 DirectCU II

power supply is AX760I corsair .

Yes thats right problem seems to present itself only with 770 ...
My System SpecsSystem Spec
30 Aug 2014   #47
TVeblen

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

You use the 2 connectors marked PCI-e to connect to the graphics card.


Attached Thumbnails
HWmonitor Voltage diagnosis (duno if values are correct)-capture.jpg  
My System SpecsSystem Spec
30 Aug 2014   #48
TVeblen

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

When you install either graphics card, are you completely uninstalling all drivers and clean installing them after the switch?
My System SpecsSystem Spec
30 Aug 2014   #49
Denisgsv

64 windows 7 ultimate
 
 

Quote   Quote: Originally Posted by TVeblen View Post
When you install either graphics card, are you completely uninstalling all drivers and clean installing them after the switch?

thats what i did so far , and used also drive sweeper .

Well i swaped back the 770 to be sure , guess what works now .
Have a youtube video/twitch game and hearthstone going ok so far no pproblems :|
I have no idea wtf was wrong , didnt inserted it well first time ?

Cant believe it actually works and everything .

guys recomend me a power surge , ill get one of those .
Thank you .

Thanks for all the patience you all had , and help also .

conclusion : psu solved .... and stick gpu's better next time i guess
My System SpecsSystem Spec
30 Aug 2014   #50
TVeblen

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

Yes, it's a common problem. Just a piece of hair or clump of dust in the slot, or not pushing the card all the way in on one end - that all it takes to mess things up. Re seating the card will fix it.

Good work. Enjoy!
My System SpecsSystem Spec
Reply

 HWmonitor Voltage diagnosis (duno if values are correct)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD from HWMonitor v1.19
Hey guys. I just got a BSOD. And the reason is that I tried to run HWMonitor v 1.19 (last version). I tried to run both and installation and portable version. As soon as I double-clicked on the icon my system got in to BlueScreen. I am going to attache the *.xml and *.dmp files to this message....
BSOD Help and Support
CPUID HWMonitor accuracy?
A couple days ago I installed CPUID HWMonitor to check my hard drive temperatures. Is it a dependable tool for this? I noticed that the voltages it reports are unrealistic, and have found many reports of this on the web (often with comments like "Your PC wouldn't boot with those voltages".) Are...
Software
CPU Voltage & CPU VDDA Voltage
Hey guys. I am sort of confused as to why my BIOS has "CPU VDDA Voltage" and not "CPU Voltage". My BIOS version is 1102 (latest). Any help?
PC Custom Builds and Overclocking
HWMonitor 1.16 causes BSOD
Tried running the latest 64bit version of HWMonitor today and it caused a BSOD.:( Version 1.15 seems ok.
BSOD Help and Support
HWMonitor can causes crashes
Just an FYI... Apparently this temperature monitoring software can cause hard crashes in certain system configurations. It certainly did in mine and wanted to pass along the information to the community at large. If you are having periodoc hard crashes/lock ups and are running HWmonitor,...
BSOD Help and Support
Diagnosis
Greetings all, I have the opportunity to pick up a dead laptop for free. The owner suspects that she was infected by a virus as she spewed out infected emails to her entire saved address list. She then said that she suffered catastrophic hard drive failure. So she is giving it to me. I can easily...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:20.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App