USB detection error and computer cannot detect my wifi card

For the usb detection error it is an adapter that plugs my micro sd card into the usb port so i can move music onto it to put it in my phone, i had to reformat the sd card while it was in my phone so my phone could use it and now i cannot get it detected on my computer no matter how i connect it (usb adapter, SD card adapter, micro sd port ) and i have yet been able to find a solution to this problem. the device status is "This device could not start. (code 10)"

The issue with my wifi card is still unknown to me as well, i have my wifi card plugged into my desktop and it says i have nothing plugged in in the bottom righthand corner where the internet connection would show. When i go to device manager it has the yellow warning symbol next to it and the device status is as follows "Your computer's systems firmware does not include enough information to properly configure and use this device. to use this device, contact your computer manufacturer to obtain a firmware or bios update. (code 35)"
this wifi card started to perform slowly and made my download rate drop from 1.3MB/s to under 100Kb/sec randomly. I have a Broadcom 802.11g network adapter with hardware id pci\VEN_14E4&DEV_431&SUBSYS_044914E4&REV_02 and i had the driver tuner from broadcom which needs internet to work... seems counter intuitive to me but whatever.
I ran into this issue when I switched my wifi cards to a different one and the new one didnt download the drivers correctly so i just swapped em back and it still worked the bad performance way but when i turned on my computer for the next time it couldnt detect it.