Intel LAN Card - Cannot start (code 10)


  1. LcsFletcher
    Posts : 16
    Windows 7 x64
       New #1

    Intel LAN Card - Cannot start (code 10)


    Hello,

    Earlier today while gaming my Corsair Cx500 power supply failed shutting off my pc and forcing me to replace it with a Corsair Cx750m power supply. Upon rebooting my computer I noticed that I didnt have internet connection and that a hardwired connection was not available under adapter settings forcing me to use the built in wi-fi adapter for now. Under Device Manager my Network card which is a "Intel 82579LM Gigabit Network Connection" said the following "The Device cannot start (code 10)" I have been dealing with this for about 5 hours now and have tried multiple methods which I will mention below.

    Specs:
    Asus P8Z77 - V
    Corsair 32G Ram
    Gtx 770
    Intel i7 - 3770 @ 3.50GHz

    Methods used to attempt a fix:
    Uninstalling and reinstalling with latest drivers
    Reinstalling drivers from original motherboard disk (back-dating)
    Disabling and re-enabling
    Total restart, unplugging cord and all
    Uninstall, then a registry clean, re-install

    So not im wondering if when my computer turned off suddenly earlier because of my power supply failure if that possibly broke the ethernet adapter. Anybody know of any solutions?
      My Computer
    Quote Quote

  3. maxie
    Posts : 18,415
    windows 7 home 64bit
       New #2

    Uninstall the Driver for the Network Controller .... Then Install from the Link below ....

    https://downloadcenter.intel.com/Det...?DwnldID=22026


    Then go to the Motherboards Website and Download the Driver ...


    Motherboard - P8Z77-V - ASUS
      My Computer
    Quote Quote

 

  Related Discussions
Hello, I have recently purchased a new system, and since the first time I booted it up the on board gigabit network card is unable to start. I get the following error when in device manager: Device cannot start (code 10) In order for the device to work, whilst in device manager, I must...
hi i have a laptop hp pavilion g6 1242se my intel graphics card has code 43 and second video card ati radeon 6470m is not there i have tried hp drivers leshcat drivers but no hope so what i do is update intel driver to standard vga graphics adapter from device manager and after some frequent...
Description Windows was able to successfully install device driver software, but the driver software encountered a problem when it tried to run. The problem code is 10. Problem signature Problem Event Name: PnPDeviceProblemCode Architecture: x64 Hardware Id: ...
I have an SD card that I use in my phone, and it's saying that it's corrupt. When I put it in the computer it doesn't appear in "My Computer", and in Device Manager I get "This device cannot start (Code 10). I have only found solutions for Windows XP computers, none for Windows 7. If anyone can...
Hi all, I have a samsung x60 Plus which as of yet has no windows 7 specific drivers but it does have Vista. The laptop has a ricoh card reader (xd, sd smc) this does work as I have rebooted into XP and it reads and writes fine. In windows 7 I either end up with the standard SDA driver that...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 01:50.
Find Us