Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Unable to fin the XMP profile on my BIOS..

26 Dec 2014   #21
TVeblen

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

XMP is an Intel specification. I believe that AMD can use XMP RAM, you just use the AMD equivalent which is AMP.
It looks like you have AMP setting in your screenshot (just below highlighted).
Click on that and see if you can enable AMP.

I looked yesterday and you do not have AMP capability in your standard BIOS settings, so I am not sure that motherboard can take advantage of that specification at all.


My System SpecsSystem Spec
.
26 Dec 2014   #22
MrSH4RKYY

Windows 8.1 PRO
 
 

Here are the screen shots of settings I am sure you are talking about

[ATTACH][ATTACH][ATTACH]Unable to fin the XMP profile on my BIOS..-sdxyslb.jpg[/ATTACH][/ATTACH][/ATTACH]


Attached Thumbnails
Unable to fin the XMP profile on my BIOS..-8ia1umv.jpg   Unable to fin the XMP profile on my BIOS..-lwpvcf9.jpg   Unable to fin the XMP profile on my BIOS..-qmz7gg9.jpg  
My System SpecsSystem Spec
26 Dec 2014   #23
MrSH4RKYY

Windows 8.1 PRO
 
 

Also in reply to TVeblen the AMP option is all grayed out for me.
Unable to fin the XMP profile on my BIOS..-capture.png


My System SpecsSystem Spec
.

26 Dec 2014   #24
maxie

windows 7 home 64bit
 
 

There is no way then to set AMP Profile as your Motherboard does not Support it ....

Have read quite a few Posts that it can be set Manually how is the question though ...
My System SpecsSystem Spec
26 Dec 2014   #25
TVeblen

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

That motherboard and it's BIOS are too old to even have the Ai Tweaker utility. That is where you could easily bump up the RAM speed. The BIOS setting you show only allow you to play with timings.

I would leave things be if I were you. You would need to do old-school overclocking to increase RAM speed. And old school was not easy. Not then, not now.

If you are determined you could post in the Overclocking forum here. See if there is an old Yoda that remembers how to do that.
My System SpecsSystem Spec
27 Dec 2014   #26
stormy13
Microsoft MVP

Win 7 Ultimate x64
 
 

From the manual that maxie linked to back on the first page,

Unable to fin the XMP profile on my BIOS..-memclock.jpg

Set the "memory clock mode"to manual, and then set it to 800 MHz. May also have to go to the "memory over voltage" setting and set that manually as well to whatever your RAM spec is (likely either 1.5V or 1.65V).


My System SpecsSystem Spec
27 Dec 2014   #27
MrSH4RKYY

Windows 8.1 PRO
 
 

ah ok guys thank you for all the help I knew my mobo was old but not that old xD thanks again, have a nice new year ! how do I give you rep btw? I forgot :P
My System SpecsSystem Spec
27 Dec 2014   #28
maxie

windows 7 home 64bit
 
 

Have you tried Stormy13 suggestion ? ...
My System SpecsSystem Spec
Reply

 Unable to fin the XMP profile on my BIOS..




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Unable to delete Windws Streaming location for deleted profile
I have deleted the main profile on my Lounge PC to clear up some issues, while keeping the user folder to copy back in the settings after creating a new profile of the same name. I always disable Windows media streaming to reduce unnecessary network load however the streaming location for the...
Network & Sharing
Unable to get to BIOS
I have a new Alienware PC from Dell and I am trying to get to the BIOS to make a few changes. From the doc, I understand that I need to hit the F2 key when the prompt is displayed, but it never is. Nor is the prompt to boot in safe mode. If I start using the F2 key early, the system just...
Installation & Setup
Unable to access user profile on Windows 7
When I try to log onto a user account it logs me into this screen on a temporary profile. http://i.imgur.com/r24iq.jpg This same problem happened about 1-2 months ago on the first user profile on the computer. My cousin and I searched google and all we could find was deleting 1 of 2...
General Discussion
Unable to change BIOS settings
I would like to change the boot order in my BIOS, but nothing on the keyboard will work. I reboot, and the splash screen for Gigabyte comes up. I hit the delete or F12 button and the BIOS screen comes up. Then nothing I do on the keyboard works. I have to hit the reset button. Since I can...
General Discussion
Booting Isues Afer I Modified & Saved A BIOS Profile, Need Help!!!
Hello. I have an issue that I need some advice on. For the last few mornings when I turn on my computer after 6-8 plus hours of not using it, I get this message while the BIOS is booting but before Windows starts: Overclocking Failed! Please enter setup to re-configured your system. Press F1...
General Discussion
Unable to log into user profile with my password
I logged in fine this morning, then computer did a shutdown and I have not been able to log into my profile using my password since. It says my password or username are incorrect...I can't do a system restore because I can't log into my computer and I don't want to reinstall windows because I will...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:25.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App