Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: added syba 4 port usb 3.0, win 7 not recognizing

29 Dec 2014   #1
youdoofus

win 7 x64
 
 
added syba 4 port usb 3.0, win 7 not recognizing

the title pretty much says it all. when i boot into win 8 or ubuntu, it recognizes them and they work fine, no driver needed. The instructions even say that no driver is needed. Im mainly perplexed as to why it will recognize them in 8 and ubuntu, but not 7


My System SpecsSystem Spec
.
01 Jan 2015   #2
maxie

windows 7 home 64bit
 
 

Hi Welcome to Seven Forums .... What is the Model Number ? ... Though some models do not need a Driver they have a Firmware Update ..


Have you Posted on the SYBAUSA Forum? ...
My System SpecsSystem Spec
01 Jan 2015   #3
ComputerGeek

Desk 1: Win 7 Pro x32; Desk 2: Windows 10 x64
 
 

Quote   Quote: Originally Posted by youdoofus View Post
Im mainly perplexed as to why it will recognize them in 8 and ubuntu, but not 7
Re: Windows 7 vs 8

a USB 3.0 driver is provided by MS and included in Windows 8. But not for Windows 7. So USB 3.0 on Windows 7 always requires a 3rd party driver that need be downloaded and installed
My System SpecsSystem Spec
.

01 Jan 2015   #4
Lady Fitzgerald

Win 7 Ultimate 64 bit
 
 

What is the part number of the card (Syba makes several of them)? I seem to remember a missing driver issue on one of them (that one is correctable).
My System SpecsSystem Spec
Reply

 added syba 4 port usb 3.0, win 7 not recognizing




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
router not passing port scan after opening port
1. Is this a wired or wireless connection issue? wireless 2. Who is your Internet Service Provider (ISP)? Charter 3. What type of Broadband connection are you using? Cable 4. What is the exact Make and Model of your Modem, Router or Modem/Router Combo Netgear WNDR3800, Cisco DPC3008
Network & Sharing
Syba USB 3.0 Flash Card-Reader Disconnecting every 3-minutes!
Hello. I have a brand new Syba SY-HUB50044 SD card-reader and USB 3.0 Hub. This device is an internal USB 3.0 Hub, plus a SD card-reader. It gets power from an internal molex/sata connector, and connects to your motherboard's USB 3.0 via either the 20-pin header or a USB 3.0 cable out the back of...
Hardware & Devices
DVI port on monitor is stuck res of 640x480 VGA port works fine
I have dual monitors......my primary display monitor is a Chimei CMV223D My secondary display monitor is an Acer AL1916W. My graphics card is an HD ATI Radeon 5800. PROBLEM: My primary display monitor which usually has a display resolution of 1680x1050 is currently stuck on 640x480 and...
General Discussion
Readyboost Not Recognizing USB 2.0 Port
My first time posting on these forums, not sure where to put the thread so I'll just leave it here. I tried today to use my 3rd Generation iPod Nano as a flash drive to use it with Readyboost to boost my memory, but when I got to the Readyboost tab this error came up:...
Hardware & Devices
Windows 7 with XP mode not recognizing USB 2.0 port.
Hello, We would like to get our Panini Vision X check scanner working in XP mode inside Windows 7. Unfortunately as I begin the installation for the check scanner in XP mode I get the error in picture #1. The error is that a USB 2.0 port is not found so the installation will not continue....
Virtualization
Syba SD-ata133r ide controller PCI
I cant seem to get this running in WIN 7 pro... it shows device driver failed...have tried online and manually choosing drivers.:sarc: Ive tried these to no avail DRIVERS
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:18.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App