Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Sudden "Event 55 ntfs" on HDD

13 Apr 2015   #1
dorian hawkmoon

Windows 7 Ultimate (x64) SP1
 
 
Sudden "Event 55 ntfs" on HDD

This morning my pc startup ended in ' computer has rebooted from a bugcheck' . I subsequently found,later, after I had uninstalled my new BDIS 2015 install (I thought it was the culprit) that I had two Event 55 ntfs Errors ("The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolume3"). I ran complete Disk Doctor checkup on "C" after windows prompted, and it said "C" drive is clean. No bad sectors. I haven't run WD utility thorough check yet though. I'm a bit worried here.




Attached Thumbnails
Sudden "Event 55 ntfs" on HDD-untitled.png  
Attached Files
File Type: zip PC-Mon_04_13_2015_185459_24.zip (1.49 MB, 4 views)
My System SpecsSystem Spec
.
13 Apr 2015   #2
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

My System SpecsSystem Spec
13 Apr 2015   #3
dorian hawkmoon

Windows 7 Ultimate (x64) SP1
 
 

Hello Layback Bear
"Bitdefender Internet Security 2015"

I ran check disk, it came out, as it said, "Clean". No bad sectors found there on chkdsk startup check.

(Btw, I have attached logs collected by Dm log collector in the first post, as it was instructed in this forum)
My System SpecsSystem Spec
.

13 Apr 2015   #4
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Your post said you run Norton Disk Doctor on a system with BitDefender installed.
Your post did not state you ran the checks in the fashion that the Microsoft instructions indicate in the hyperlink I posted.

Here is another option. A tutorial by Brink.

Disk Check

These are just suggestion for things to do. Of course it's your system so it's your choice.
My System SpecsSystem Spec
13 Apr 2015   #5
dorian hawkmoon

Windows 7 Ultimate (x64) SP1
 
 

Sorry, my fault.
I should've said it was AVG disk doctor (not Antivirus, AVG Tuneup), I was trying one thing after another before I posted here! I guess, I'm a bit nervous trying to back up my numerous files and documents. I checked again like you instructed... posting screen.


Attached Thumbnails
Sudden "Event 55 ntfs" on HDD-img_20150413_222054.jpg  
My System SpecsSystem Spec
13 Apr 2015   #6
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

I would highly recommend removing AVG Tune up or any other programs like it.
You may be causing your problems with such programs installed.

Then do this tutorial by Brink and see if Windows 7 File System checks okay.

SFC /SCANNOW Command - System File Checker
My System SpecsSystem Spec
14 Apr 2015   #7
dorian hawkmoon

Windows 7 Ultimate (x64) SP1
 
 

Done, as suggested. It checked out okay, no dialog about corrupt file.

On a side-note, how good is Display Driver Uninstaller for cleaning up leftover display driver files? Or else, are there better options, 'cause my CCC context menu option has vanished after a clean install.
My System SpecsSystem Spec
14 Apr 2015   #8
dorian hawkmoon

Windows 7 Ultimate (x64) SP1
 
 

Any further suggestions, on either matter?
My System SpecsSystem Spec
14 Apr 2015   #9
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

There aren't any .dmp files in your attachement in post #1, therefore no analysis is possible.

Setup for minidumps (small dumps) as follows:
Dump Files - Configure Windows to Create on BSOD

Then when you get another BSOD, re-run DM Log Collector and upload the new zip file here.
My System SpecsSystem Spec
14 Apr 2015   #10
dorian hawkmoon

Windows 7 Ultimate (x64) SP1
 
 

The previous one has vanished! Okay, I have made the settings for mini dump as shown in the tutorial.

Any thoughts on the missing context menu Catalyst Control Center entry? I tried googling suggestions, I failed to get it through AMD cleanup utility.
My System SpecsSystem Spec
Reply

 Sudden "Event 55 ntfs" on HDD




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
"Distributed Link Tracking Client" service and NTFS junction points
I understand that this Windows service has something to do with maintaining (keeping) links to files on a network pointing in the right direction. I'm currently disabling this Windows service, seeing as I most probably don't need it (I only run a simple home network using a router). I hope this...
Performance & Maintenance
BSODs and games not responding ( 0x0f4, 0x07a "ntfs.sys" )
Hello all, So I've had a list of current problems that have been driving me up the wall lately. I have a sager np9150 notebook with the following specs gtx 680m core i7 3630qm 16gb ram @ 1600mhz windows 7 64-bit home edition 750gb mechanical drive bigfoot wireless N
BSOD Help and Support
My drive0 is "Unallocated Space" How do I format it to NTFS ?
Drive 0 is "Unallocated Space" as shown in Disk Mgt attachment. How do I format this into NTFS . There is no "FORMAT" command when right clicked ?
Installation & Setup
BSoD with "STOP:0x00000024" error and "Ntfs.sys"
Basic system description: Desktop PC about 2 years old with: Motherboard: Asus P5Q-E Processor: Intel Core 2 Quad Q6700 @ 2.66GHz RAM amount: 8GB Operating System: Windows 7 Professional Service Pack 1 OEM 64 bit Graphics Cards (I have two installed and software controllable CrossFire): AMD...
BSOD Help and Support
Membership of local built-in group "Users" -- NTFS permissions
Dear, Can somebody help me? My initial admin account (made with the installation of windows7) is Marie. When I look at the Local Users and Groups snap-in of MMC, she's member of the group administrators but not of the group Users. BUT then I made a folder "Test". I disabled the...
Network & Sharing
How to change "FAT32" penDrive to "NTFS"? can't format it "NTFS"
I have "Kingston" 4GB pen-drive its file system is "FAT32" i try to change its files system to "NTFS" using "formatting" process. When i try to format it in "NTFS" this error show. "Windows was unable to complete the Format." So how do i change its file system to "NTFS"? :mad: ...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:42.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App