Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Samsung Magician 4.6, 840 EVO Read Performance Fix Coming Later...

15 Apr 2015   #1
A Guy

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x64 SP1
 
 
Samsung Magician 4.6, 840 EVO Read Performance Fix Coming Later...

I installed the Magician. I did NOT get the Advanced tab on the Performance Optimization. Not sure what's up with that. Can't be bothered during the week, will look into it this weekend.

Samsung Magician 4.6 and 840 EVO EXT0DB6Q Firmware Review - Finally Fixed

Samsung Magician 4.6 and 840 EVO EXT0DB6Q Firmware Review - Finally Fixed | Firmware Update and Samsung SSD Magician 4.6 Added Features

New Samsung SSD 840 EVO Read Performance Fix Coming Later This Month

New Samsung SSD 840 EVO Read Performance Fix Coming Later This Month

A Guy


My System SpecsSystem Spec
.
15 Apr 2015   #2
Ranger4

Windows 7 Home Premium 64 bit sp1
 
 

I don't have the Advanced tab on my Magician either.

My version is Product Version 4.5.1.0 & the File Version is 4.5.1.65. So far I have not received an update but it may come through soon.
I found the product Version by Right Clicking on the Magician short cut on my Desk Top & select Open File Location which should show the Samsung Magician Application, Right Click on that & select Properties then select the Details Tab & it will show the Version.
My System SpecsSystem Spec
15 Apr 2015   #3
A Guy

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x64 SP1
 
 

4.5 did not have it, it is new for 4.6...well, supposed to be there

A Guy
My System SpecsSystem Spec
.

Reply

 Samsung Magician 4.6, 840 EVO Read Performance Fix Coming Later...




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
lost disc space while using samsung magician?
I had 91gb. free on 840 120gb. model but, after messing with the magician software and updating the firmware, I now have 79gb. free and I have no backups on the drive I keep an image backup on an external usb drive. Any help with this problem would sure be appreciated. :(
Hardware & Devices
Samsung Magician and TRIM message
I recently installed a Samsung 840 EVO 500GB SSD. I checked first off and TRIM is on. However, when I run the Magician it tells me that my OS(7 x64) doesn't support TRIM. Is it telling me that it doesn't now because Samsung is in charge? Any ideas? Thank you.
Hardware & Devices
Questions for Samsung Magician users
I just upgraded Magician to v4.3. It's the first time I've looked at the program in many months. I made some choices when I first installed the SSD, but I'm wondering about some of these now. Program: Do you allow Magician to run at startup? Reasons? Over Provisioning: Do you enable this?...
Hardware & Devices
Samsung Magician driver
I have ordered a Samsung 840 EVO SSD and will be installing it in a few days. While looking at the manuals on Samsung's support page, I was reading the procedures for using the Magician software. After the system requirements, which my system is well over the minimums, there is a section on Driver...
Drivers
New version of Samsung Magician software.
There is a new version of Samsung Magician software, version 4.3, which I discovered when I ran the program today. The new version has provision to enable "Rapid Mode" on Samsung 840 Pro series SSD's which I think was only previously available on the EVO series. This may be of interest to...
Software
samsung ssd: will firmware update harm anything? magician no use.
friends I'm installing a fresh samsung 840 120gb. i thought i could put the ssd on sata 1 and get firmware via magician on my windows 8 lab mule. no dice. apparently magician ONLY wants to see the ssd on sata zero. it can pull up the drive, but none of the controls work. soooo... I'm thinking...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 11:26.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App