Windows 7 - Window7 and Printer

Sallydally · 11-08-2009

I upgraded to Window 7 everything works great exept my Printer,Lexmark X2500 will not work.I installed the Driver that was recommended on the Lexmark Site,but it still dont work?

**DocBrown** · 11-08-2009

Welcome Sallydally,

Please give us more system specs, what version of Windows 7, 32 bit, 64 bit, etc

Sallydally · 11-08-2009

Thank You .I have win 7 32bit.all my other Programs work fine. I just tried to uninstall the Printer but I could not.I still have a file "stuck" that dont want to delete or print.

**1Bowtie** · 11-08-2009

Hi Sallydally and Welcome to SevenForums

Try going to Lexmark and dl the Vista driver for your printer, make sure the usb cable is unplugged, install the Vista driver in compatibility mode, the plug the usb cable back in the printer. My HP printer was the same way, no Win 7 driver and Vista driver in compat mode worked for me. Hope this helps, let us know.

Smitty

**richc46** · 11-08-2009

I had the same problem with my HP 1018. Step by step what I did. Uninstalled old driver, went to HP site, downloaded Vista 64 (Win 7 not available). I saved the drive to my documents, I did not select run. I then go to my documents and right click to install XP mode. I now have a printer. If we have the same problem, follow step by step you should have a printer in 5 minutes.

Sallydally · 11-08-2009

I dont understand this to good

My Computer is Acer.I bougt it a few month again with Vista on it and had a free upgrade to win 7,wich I did.everything transferd fine exept the Printer.so I found the Driver on Acer and I downloaded that.
http://www.microsoft.com/windows/compatibi...0&os=32-bit

Sallydally · 11-08-2009

I also wanted to say,the Printer shows up as conected and working.The Page to print comes up and I click ok and then it just sits there.something is missing.I restart the Computer and everything kicks in.

**richc46** · 11-08-2009

Log off, shut down and wait a few minutes. If it still is not working, uninstall driver and try to install it agin. Make sure you have the right driver, 64 bit or 32. Make sure you have the right driver for your printer model. Check your USB cable both at computer and printer. Go to Printer and devices, does it show your printer, correct model?

Sallydally · 11-08-2009

i FINALLY GOT IT.SOMEONE RECOMEND TO unplug the printer first and then right click on it and select Remove Device.

Reboot your computer and then plug your printer back in. If it's a USB printer, it should automatically install with the updated drivers.
than I used the Lexmark disk to install again .

I been messing with this Comp almost all day.Thank You All for all You'r help