Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Hard drive wont let me format !

15 Jun 2015   #1
ambokes

Windows 8 x64
 
 
Hard drive wont let me format !

Hello , i have 1 ssd for running windows and 1 hdd for storage/games and i wanna format my hdd but it wont let me , When i try to format through My Computer i get this error ' Windows was unable to complete format'
And when i checked at disk management there was no format option available there , as you can see here :Gyazo - 5f48f8aa5f52803f57a85e72af69d66f.gif

And this is a screenshot of how my disk management looks like :Gyazo - 7601c6ed1846374ff77e73506a1ef5f8.png

Any solution for that ?


My System SpecsSystem Spec
.
15 Jun 2015   #2
fireberd

Windows 10 64 bit
 
 

Looks like the SSD may not have been formatted correctly. In Windows 7 you should have two partitions on the SSD drive. It looks like one of the needed partitions is still on the drive you want to format.

Here is what my system looks like. Disk 0 is a 500GB SSD and two partitions for Win 7. Disk 1 is an SSD for Win 8.1 and Disk 2 is a 1TB Hard drive.


Attached Thumbnails
Hard drive wont let me format !-capture.jpg  
My System SpecsSystem Spec
15 Jun 2015   #3
GokAy

Windows 7 Ultimate x64 SP1
 
 

Seems your bootmgr is on F (system tag), use EasyBCD to move bootmgr to C. Bootmgr - Move to C:\ with EasyBCD

Set F paging file to "No paging file".: Computer - Properties - Advanced System Settings - Performance Settings - Advanced - Change

Set F inactive:
- run cmd as elevated (as admin) and enter the following
- diskpart
- list disk (make sure the correct one - should be 0, check size)
- select disk # (# as listed above)
- list part
- inactive

Try deleting now
My System SpecsSystem Spec
.

15 Jun 2015   #4
ambokes

Windows 8 x64
 
 

Quote   Quote: Originally Posted by GokAy View Post
Seems your bootmgr is on F (system tag), use EasyBCD to move bootmgr to C. Bootmgr - Move to C:\ with EasyBCD

Set F paging file to "No paging file".: Computer - Properties - Advanced System Settings - Performance Settings - Advanced - Change

Set F inactive:
- run cmd as elevated (as admin) and enter the following
- diskpart
- list disk (make sure the correct one - should be 0, check size)
- select disk # (# as listed above)
- list part
- inactive

Try deleting now
Hmm looks like theres problem when try to inactive the disk , The first part worked great , my F disk is no more System , but now even though i can click the format option i am still not able to format .
Heres some screenshots:


Attached Thumbnails
Hard drive wont let me format !-1.png   Hard drive wont let me format !-2.png   Hard drive wont let me format !-3.png   Hard drive wont let me format !-4.png  
My System SpecsSystem Spec
15 Jun 2015   #5
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Please use this tutorial by Brink to post screen shots so we all can see them.

Screenshots and Files - Upload and Post in Seven Forums
My System SpecsSystem Spec
15 Jun 2015   #6
ambokes

Windows 8 x64
 
 

Quote   Quote: Originally Posted by Layback Bear View Post
Please use this tutorial by Brink to post screen shots so we all can see them.

Screenshots and Files - Upload and Post in Seven Forums
Ty i have now edited previous post where you can now see the screenshots
My System SpecsSystem Spec
15 Jun 2015   #7
ignatzatsonic

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium SP1, 64-bit
 
 

Are you trying to make Partition 1 inactive?

From that list of commands, it looks to me like you'd have to do a "select partition 1" and then simply "inactive" after the selection of partition 1 is acknowledged.

You did a "list part", but not a "select partition 1".
My System SpecsSystem Spec
15 Jun 2015   #8
ambokes

Windows 8 x64
 
 

Quote   Quote: Originally Posted by ignatzatsonic View Post
Are you trying to make Partition 1 inactive?

From that list of commands, it looks to me like you'd have to do a "select partition 1" and then simply "inactive" after the selection of partition 1 is acknowledged.

You did a "list part", but not a "select partition 1".
You were right , my F drive is now inactive but i still cannot format , i get the same error


Attached Thumbnails
Hard drive wont let me format !-1.jpg   Hard drive wont let me format !-2.png  
My System SpecsSystem Spec
15 Jun 2015   #9
ignatzatsonic

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium SP1, 64-bit
 
 

F still has the page file.

Why?

Look at the beginning of post 3 in this thread from GoKay; put the page file on C. Then see if you have better luck.
My System SpecsSystem Spec
15 Jun 2015   #10
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

The disc 1 should be moved to be disc 0. Changing sata ports should do this for you.
Verify your boot order in bios after changing sata ports.

Page files should be on the C partition and of course in your setup, only C should be active.

Your system specs show W8. Is that correct?
My System SpecsSystem Spec
Reply

 Hard drive wont let me format !




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
format external hard drive that wont show up in my computer
i used WBFS manager 3.0 to put a super mario galaxy 2 iso as a backup on my seagate external hard drive. (my original is scratched up enough as it is and has lots lag) it worked perfectly on my wii but then i decided to backup all my wii games, just in case. but first i had to get them off of one...
Hardware & Devices
Format Hard Drive...
Hey guys, I have a HP Pavilion dv7 laptop. Recently, my computer has encountered some sort of hard drive issue. It started with the constant windows repair loop (yes, I tried all the solutions to fix this) and we found out it was an issue with my C drive. Anyways, I can't boot my computer, nor can...
General Discussion
How can I format my hard drive?
So I upgraded my PC and replaced the hard drive. It has been sitting on the shelf for a long time so I'd like to format it and reinstall windows 7 onto it. I don't have a clue how to do this, can I just unplug the hard drive on my other PC and plug the old one in just to format it, reinstall...
Installation & Setup
Format second hard drive
I am running Windows 7 64 bit, dual boot with Windows 8. Windows 7 is my my main OS and I setup with Windows 8 as dual boot. I no longer want Windows 8 or to dual boot. I went into msconfig, boot, removed Windows 8 from boot, left windows 7 as default. I tried to reformat the second drive, got...
General Discussion
Will format the hard drive [D & C drive], delete the all file in it?
I need to format my hard drive so i wanna know Will format the hard drive , delete the all file in it? Like the software that i install , will they remain there or will be deleted?
Hardware & Devices
Format hard drive
I am trying to format my hard drive and re install windows 7 as my hard drive is ruuning out of memory tried removing some programs but is not helping much my hard drive is 232GB I only have 28GB left can anyone please advise me how to foramt my hard drive. Thanks Chris
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:22.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App