Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Memory RAM advice

19 Jun 2015   #11
graphomet

windows 7 home premium 64bit
 
 

Ill remove the old rams, and leave the 2 new ones in. The old rams are close to the processor, so when I take them out of the slots, should I also place the new ones in their position or it doesn't matter having ram sticks further away from the possessor?


My System SpecsSystem Spec
.
19 Jun 2015   #12
GokAy

Windows 7 Ultimate x64 SP1
 
 

You should consult your motherboard manual for slot selection.
My System SpecsSystem Spec
19 Jun 2015   #13
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

One last time:

Quote   Quote: Originally Posted by Boozad View Post
Right, first of all can you fill in your system specs by following the link in my signature
I'm not going to be jumping backwards and forwards and sifting through screenshots to keep finding your components, that's what the system specs area is there for as it follows your every post and we can find the information in one click.

Now, all of your dumps (including 0x3B, 0x50, 0x24, 0xA and 0x4E) are pointing towards memory corruption so it's imperative to remove the old RAM, configure the two sticks of new RAM according to the instructions in your motherboard manual as already pointed out and run MemTest86+ as posted in post #4
My System SpecsSystem Spec
.

19 Jun 2015   #14
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

These good folks trying to help need your help.

Here are two Tutorials that will help you post your (My System Specs) as they should be.
By Brink:
System Info - See Your System Specs

By Kari:
Speccy - Publish Snapshot of your System Specs

Please read and comply to Boozad's request for System Specs.
My System SpecsSystem Spec
20 Jun 2015   #15
graphomet

windows 7 home premium 64bit
 
 

Hi forum.

I have filled out my system specs. I hope its sufficient info about my PC system.

Today I removed the old Ram sticks, and placed the two new ones in their position. Im following up on how the system goes. Hoping it was the old Rams causing the BSOD.
My System SpecsSystem Spec
20 Jun 2015   #16
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Thank you for updating your specs. Have you run MemTest86+ as advised in post #4?
My System SpecsSystem Spec
20 Jun 2015   #17
graphomet

windows 7 home premium 64bit
 
 

Hi Boozad.

This time Ill put in all 4 ram sticks, unfortunately even now with the 2 new ram sticks I got a BSOD again. This time I got a new error: Reference by pointer.

Ive never seen this error message before.

So Ill insert all 4 RAM sticks and try the MemTest86+
My System SpecsSystem Spec
20 Jun 2015   #18
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Leave the old RAM out. There's a problem somewhere and putting the old RAM back in isn't helping identify what the problem is. Run the tool linked in the BSOD Posting Instructions again and upload the new lots so I can see the latest dump file.
My System SpecsSystem Spec
20 Jun 2015   #19
GokAy

Windows 7 Ultimate x64 SP1
 
 

Load defaults in BIOS (first menu or exit menu), old settings can be interfering. Then check if Auto timings are correct.
My System SpecsSystem Spec
20 Jun 2015   #20
graphomet

windows 7 home premium 64bit
 
 

Here is the new crash Zip.

I'm now starting to think it could be my graphics card, causing the issue.


Attached Files
File Type: zip ADMIN-PC-Sat_06_20_2015_201436_64.zip (2.99 MB, 2 views)
My System SpecsSystem Spec
Reply

 Memory RAM advice




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
4Gb memory (2.75 Gb usable) memory remapping in bios causes BSOD
I recently did a new install of Windows 7 64 bit. I noticed windows showed 4Gb of ram (2.75Gb usable). I read tons of articles after googling this and tried several options to free up some more ram. I have 2 options in bios to change memory remapping over 4GB. S/W and H/W. When I enable S/W...
BSOD Help and Support
General Win7 memory leak and Unknown memory usage?
So I've had this problem for a few months with my thinkpad x220, win7 home premium 64 bit. I used ccleaner, run memtest86 multiple times, chkdsk multiple times, sfc scan multiple times, none that helped. Sfc always detects errors but always cannot fix some of them. I have mse, avast, and...
Performance & Maintenance
Memory Upgrade advice
Running Windows 7 with 4GB RAM. Just got 2 extra 4GB DIMMS but HP manual says that speed is 1333 MHz if no more than 2 of the 4 slots used but drops to 1066 MHz if with more than 2. Do I go for 8GB at 1333 MHz or 12GB at 1066 MHz? Gut feel is for 12GB but I'm not sure what effect speed drop...
General Discussion
LOW Computer Memory- ONLY 90MB or less Free Memory? Soo Slow?
Hello, i have a Windows 7 64bit OS and i am running a Laptop. Ever since i had this virus (Win32 malware gen) which kept coming up with a notifications of the virus on avast every 2-5 minutes my computer was running slow and when i deleted the virus, by dragging it in to the recycle bin and...
Performance & Maintenance
Windows Memory Diagnostic Reports Memory Problems
Hi, I ran Windows Memory Diagnostics multiple times (1GB Ram = 2X512), sometimes it reposrts errors, and sometimes not! I'm running two OS: Windows Server 2008 R2 SP1 64Bit, where I'm encountering bad performance, and Windows 7 32Bit which runs smoothly. I'm not sure if it's really a...
BSOD Help and Support
'Racetrack' Magnetic Memory could make memory 100,000 times faster
Source ScienceDaily (Nov. 15, 2010)
News


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:00.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App