Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Ram of 1333 mhz with 1600 mhz ?

27 Jun 2015   #21
HpBaxxter

Windows 64bit
 
 

Quote   Quote: Originally Posted by carwiz View Post
Ditto about CPUZ report. What does HWinfo64 have to say about the voltages? This will show the "running" volts.

I'm nursing a sprained wrist so typing is limited by the pain and the wrist support.
oh man I forgot to say take care sorry


My System SpecsSystem Spec
.
27 Jun 2015   #22
carwiz

Windows 7 Pro-x64
 
 

That's ok, thanks. Scotch seems to help.

Scroll down on that last page you posted. It will show all the voltages for CPU, chipset, etc. Look for one called DRAM. What does that one say.
My System SpecsSystem Spec
27 Jun 2015   #23
HpBaxxter

Windows 64bit
 
 

Quote   Quote: Originally Posted by HpBaxxter View Post
but why Cup-Z and Speccy didn't show 1.50v with 1.35v ? they only show 1.35v


I looked up by the Module Part Number and I found this

I looked for Samsung Ram I found in their site this


Attached Images
Ram of 1333 mhz with 1600 mhz ?-samsung-ram.jpg 
My System SpecsSystem Spec
.

27 Jun 2015   #24
carwiz

Windows 7 Pro-x64
 
 

I don't know about CPU-Z other that it just reads the info off the module. It's probably not setup (programmed) for variable voltages. The same for Speccy but it has never has been very accurate from my experience. The flexible voltage modules must be relatively new to cut down on production costs vs. separate voltage modules. As I mentioned, it's the first one I've seen. What's important is the compatible speed. The BIOS will set both modules to the slowest compatible speed.
My System SpecsSystem Spec
27 Jun 2015   #25
carwiz

Windows 7 Pro-x64
 
 

Open an elevated Command prompt (Run as Administrator). Type the command winsat mem then post an image of the results. This will test the speed of your memory and show it as MB/second.
My System SpecsSystem Spec
27 Jun 2015   #26
HpBaxxter

Windows 64bit
 
 

I don't know which one you want


Attached Thumbnails
Ram of 1333 mhz with 1600 mhz ?-1.jpg  
Attached Images
Ram of 1333 mhz with 1600 mhz ?-2.jpg 
My System SpecsSystem Spec
27 Jun 2015   #27
HpBaxxter

Windows 64bit
 
 

............>


Attached Images
Ram of 1333 mhz with 1600 mhz ?-cmd.jpg 
My System SpecsSystem Spec
27 Jun 2015   #28
carwiz

Windows 7 Pro-x64
 
 

16GB/s is about average for DDR3. Even better than many. I wouldn't worry about the voltage. I think you're good to go.
My System SpecsSystem Spec
27 Jun 2015   #29
HpBaxxter

Windows 64bit
 
 

tell me in which photo I could find DRAM ?
there is not voltage, they are all C
My System SpecsSystem Spec
27 Jun 2015   #30
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Quote   Quote: Originally Posted by HpBaxxter View Post
but why Cup-Z and Speccy didn't show 1.50v with 1.35v ? they only show 1.35v


I looked up by the Module Part Number and I found this
Because I think CPU-z only shows the advertised voltages and not the actual used.

Look at the bios for actual.
My System SpecsSystem Spec
Reply

 Ram of 1333 mhz with 1600 mhz ?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Asrock h61-vg4 (ivy bridge & ddr3 1600 / sandy bridge & ddr 1333)
Hi all, Just wanted to post this for anyone experiencing boot issues with the ASROCK H61-VG4. SPEC ASROCK H61-VG4 Celeron G1620(P0) Ivy Bridge 2.7GHz (1155 IVYBRIDGE / CHIPSET) RAM 4GB 1333MHz 1TB Samsung spinpoint F3
Hardware & Devices
will ddr3 1600 run better then 1333
ok right now i have 6GB of DDR3 PC3-10600/ 1333 but i am thinking of going to DDR3 PC3 12800 1600, will i noticed a difference or will it be so small its not worth upgrading.???? thanks
General Discussion
can i use 2133 ram in a 1333 mobo?
ok, sounds like a stupid question, i know, but if i purchase them by ende of tomarrow i get 25% off, and i plan on upgrading mobo soon. i have been generaly informed on another post that 1600 in 1333 should work, it will just operate at 1333 speed, is it the same with 2133?
Hardware & Devices
1600Mhz Ram Set to run @ 1333 by Bios
Ok, this is probably a common problem with easy solution but i'm a noob so be kind. When MY system boots, the Bios shows the Ram running @ 1333Mhz and not 1600. When I go into the Bios, it states RAm @ 1600Mhz and comes up with a message saying something about instability and knocking down the...
Hardware & Devices
4 GB of DDR3 1600 or 6GB of DDR3 1333?
Alright guys...so newegg just informed me that I won the following memory in a Facebook contest: Crucial Ballistix 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 with heat spreaders and built in thermal sensor The wording on the contest is vague, so I'm not sure if I'm getting 4 or 8GB of it. Right...
Performance & Maintenance
Win7 64bit - Should I run 4GB @ 1333 or 8GB @ 800?
I am building a new system using a Phenom II X3 720BE. I plan to install Windows 7RC 64 bit and 8GB of DDR3 1333 RAM (4x2GB). After ordering the parts I discovered the following information on the OCZ support forums (http://www.ocztechnologyforum.com/forum/showthread.php?t=50927): "4 memory...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:50.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App