Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Ram of 1333 mhz with 1600 mhz ?

07 Jul 2015   #41
HpBaxxter

Windows 64bit
 
 

Quote   Quote: Originally Posted by carwiz View Post
16GB/s is about average for DDR3. Even better than many. I wouldn't worry about the voltage. I think you're good to go.
I did the test and I found it

Memory Performance 9468.24 MB/s
Total Run Time 00:00:06.92
what does it mean ?


My System SpecsSystem Spec
.
07 Jul 2015   #42
carwiz

Windows 7 Pro-x64
 
 

Your speed dropped by almost half. What did you do?

Did you add another/different module? That can cause memory to run slower. Or you had a lot of things running when you did the test. Your previous test was 16GB/s.

Sorry, I missed your previous request for an image of mine. Below is the voltages from HWinfo64.


Attached Images
Ram of 1333 mhz with 1600 mhz ?-hwinfo-volts.jpg 
My System SpecsSystem Spec
07 Jul 2015   #43
carwiz

Windows 7 Pro-x64
 
 

Here's a run on my 1333 memory as listed in my "System Specs".


Attached Thumbnails
Ram of 1333 mhz with 1600 mhz ?-winsat-mem.jpg  
My System SpecsSystem Spec
.

08 Jul 2015   #44
HpBaxxter

Windows 64bit
 
 

Quote   Quote: Originally Posted by carwiz View Post
Your speed dropped by almost half. What did you do?

Did you add another/different module? That can cause memory to run slower. Or you had a lot of things running when you did the test. Your previous test was 16GB/s.

Sorry, I missed your previous request for an image of mine. Below is the voltages from HWinfo64.
I didn't do any thing, I just wanted to test it again, and I closed every thing and I run Disk Cleanup I even restarted the pc.
I run the test right now and I found it 16084.77 MB/s again I don't know what happened !
I still can't find the Dram.
My System SpecsSystem Spec
08 Jul 2015   #45
carwiz

Windows 7 Pro-x64
 
 

I wouldn't worry about it. It could be the chipset doesn't report on it or it's too new to be included in the software. The results of the WinSAT speed test verify that the memory is working. As mentioned earlier, you could check the voltage reported by the BIOS if you really need to know. It's not important at this time though.
My System SpecsSystem Spec
Reply

 Ram of 1333 mhz with 1600 mhz ?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Asrock h61-vg4 (ivy bridge & ddr3 1600 / sandy bridge & ddr 1333)
Hi all, Just wanted to post this for anyone experiencing boot issues with the ASROCK H61-VG4. SPEC ASROCK H61-VG4 Celeron G1620(P0) Ivy Bridge 2.7GHz (1155 IVYBRIDGE / CHIPSET) RAM 4GB 1333MHz 1TB Samsung spinpoint F3
Hardware & Devices
will ddr3 1600 run better then 1333
ok right now i have 6GB of DDR3 PC3-10600/ 1333 but i am thinking of going to DDR3 PC3 12800 1600, will i noticed a difference or will it be so small its not worth upgrading.???? thanks
General Discussion
can i use 2133 ram in a 1333 mobo?
ok, sounds like a stupid question, i know, but if i purchase them by ende of tomarrow i get 25% off, and i plan on upgrading mobo soon. i have been generaly informed on another post that 1600 in 1333 should work, it will just operate at 1333 speed, is it the same with 2133?
Hardware & Devices
1600Mhz Ram Set to run @ 1333 by Bios
Ok, this is probably a common problem with easy solution but i'm a noob so be kind. When MY system boots, the Bios shows the Ram running @ 1333Mhz and not 1600. When I go into the Bios, it states RAm @ 1600Mhz and comes up with a message saying something about instability and knocking down the...
Hardware & Devices
4 GB of DDR3 1600 or 6GB of DDR3 1333?
Alright guys...so newegg just informed me that I won the following memory in a Facebook contest: Crucial Ballistix 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 with heat spreaders and built in thermal sensor The wording on the contest is vague, so I'm not sure if I'm getting 4 or 8GB of it. Right...
Performance & Maintenance
Win7 64bit - Should I run 4GB @ 1333 or 8GB @ 800?
I am building a new system using a Phenom II X3 720BE. I plan to install Windows 7RC 64 bit and 8GB of DDR3 1333 RAM (4x2GB). After ordering the parts I discovered the following information on the OCZ support forums (http://www.ocztechnologyforum.com/forum/showthread.php?t=50927): "4 memory...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:31.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App