Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Ram of 1333 mhz with 1600 mhz ?

25 Jun 2015   #1
HpBaxxter

Windows 64bit
 
 
Ram of 1333 mhz with 1600 mhz ?

I bought an additional ram the old one is 1333 MHz and the new one (Hyundai) is 1600 MHz, they are running together in one laptop ,is that fine ?




Attached Images
Ram of 1333 mhz with 1600 mhz ?-ram-hyundai.jpg Ram of 1333 mhz with 1600 mhz ?-ram.jpg 
My System SpecsSystem Spec
.
25 Jun 2015   #2
CountryBumkin

Windows 7 Home Premium
 
 

Are these the actual screen shots as the memory is currently running? I didn't think you could run different voltages on the memory slots a the same time.
My System SpecsSystem Spec
25 Jun 2015   #3
HpBaxxter

Windows 64bit
 
 

Quote   Quote: Originally Posted by CountryBumkin View Post
Are these the actual screen shots as the memory is currently running? I didn't think you could run different voltages on the memory slots a the same time.

Yes, its the actual screen shots
My System SpecsSystem Spec
.

25 Jun 2015   #4
HpBaxxter

Windows 64bit
 
 

will my pc crash cause of the difference of the voltage ?
My System SpecsSystem Spec
25 Jun 2015   #5
ignatzatsonic

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium SP1, 64-bit
 
 

Quote   Quote: Originally Posted by HpBaxxter View Post
I bought an additional ram the old one is 1333 MHz and the new one (Hyundai) is 1600 MHz, they are running together in one laptop ,is that fine ?
Did you attempt to find RAM of the same speed or voltage?

Or not?
My System SpecsSystem Spec
25 Jun 2015   #6
HpBaxxter

Windows 64bit
 
 

Quote   Quote: Originally Posted by ignatzatsonic View Post
Quote   Quote: Originally Posted by HpBaxxter View Post
I bought an additional ram the old one is 1333 MHz and the new one (Hyundai) is 1600 MHz, they are running together in one laptop ,is that fine ?
Did you attempt to find RAM of the same speed or voltage?

Or not?
I tried, why is it so bad for the pc ?
My System SpecsSystem Spec
25 Jun 2015   #7
carwiz

Windows 7 Pro-x64
 
 

I'm surprised you got past boot with the different voltages. It would be interesting to see how Windows (Resource Monitor) has that memory blocked out. As in one module going to Hardware Reserved. I also wonder if it will pass a memory test.
My System SpecsSystem Spec
26 Jun 2015   #8
TVeblen

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

Is it fine?

Please run Memtest on the RAM to see.
Memtest86+ - Advanced Memory Diagnostic Tool
Boot from the Memtest media before bedtime and let it run through the night. A minimum of 5 passes to get a basic test result, 8 or 9 passes to get a thorough result.

Then you will know.
My System SpecsSystem Spec
26 Jun 2015   #9
HpBaxxter

Windows 64bit
 
 

Quote   Quote: Originally Posted by TVeblen View Post
Is it fine?

Please run Memtest on the RAM to see.
Memtest86+ - Advanced Memory Diagnostic Tool
Boot from the Memtest media before bedtime and let it run through the night. A minimum of 5 passes to get a basic test result, 8 or 9 passes to get a thorough result.

Then you will know.
you remind me to use a diagnostic tool come with my dell laptop " epsa pre-boot system assessment" ,
I did the test and it all passed ok ! is fine the the difference of the voltage ? wont damage the motherboard or the cpu or the old ram ? or will it make the cpu very hot ? I don't know


Attached Thumbnails
Ram of 1333 mhz with 1600 mhz ?-img_0307.jpg  
My System SpecsSystem Spec
26 Jun 2015   #10
CountryBumkin

Windows 7 Home Premium
 
 

I noticed you posted at EightForums too.

Over there CountMike said the SPD tab you are showing does not display the actual voltage your memory is running at, only what it is capable of.

It is my understanding that you can only run one voltage at a time for all memory/slots, if this is correct, you are probably running the lowest voltage (1.35V) on both slots and the slowest timing on both chips. Meaning that your faster memory is running at the slower speed.

If you run the MemTest86+ for eight passes without failure, then I 'd say you'll be fine. But you still won't be getting the best performance out of your memory.
My System SpecsSystem Spec
Reply

 Ram of 1333 mhz with 1600 mhz ?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Asrock h61-vg4 (ivy bridge & ddr3 1600 / sandy bridge & ddr 1333)
Hi all, Just wanted to post this for anyone experiencing boot issues with the ASROCK H61-VG4. SPEC ASROCK H61-VG4 Celeron G1620(P0) Ivy Bridge 2.7GHz (1155 IVYBRIDGE / CHIPSET) RAM 4GB 1333MHz 1TB Samsung spinpoint F3
Hardware & Devices
will ddr3 1600 run better then 1333
ok right now i have 6GB of DDR3 PC3-10600/ 1333 but i am thinking of going to DDR3 PC3 12800 1600, will i noticed a difference or will it be so small its not worth upgrading.???? thanks
General Discussion
can i use 2133 ram in a 1333 mobo?
ok, sounds like a stupid question, i know, but if i purchase them by ende of tomarrow i get 25% off, and i plan on upgrading mobo soon. i have been generaly informed on another post that 1600 in 1333 should work, it will just operate at 1333 speed, is it the same with 2133?
Hardware & Devices
1600Mhz Ram Set to run @ 1333 by Bios
Ok, this is probably a common problem with easy solution but i'm a noob so be kind. When MY system boots, the Bios shows the Ram running @ 1333Mhz and not 1600. When I go into the Bios, it states RAm @ 1600Mhz and comes up with a message saying something about instability and knocking down the...
Hardware & Devices
4 GB of DDR3 1600 or 6GB of DDR3 1333?
Alright guys...so newegg just informed me that I won the following memory in a Facebook contest: Crucial Ballistix 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 with heat spreaders and built in thermal sensor The wording on the contest is vague, so I'm not sure if I'm getting 4 or 8GB of it. Right...
Performance & Maintenance
Win7 64bit - Should I run 4GB @ 1333 or 8GB @ 800?
I am building a new system using a Phenom II X3 720BE. I plan to install Windows 7RC 64 bit and 8GB of DDR3 1333 RAM (4x2GB). After ordering the parts I discovered the following information on the OCZ support forums (http://www.ocztechnologyforum.com/forum/showthread.php?t=50927): "4 memory...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:55.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App