Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Same model direct USB printer but new, any unique address or other ?

10 Jul 2015   #1
WBFAir

Windows 7 Ultimate 64 bit (Full)
 
 
Same model direct USB printer but new, any unique address or other ?

Hello all

At work I am having an issue where the IT people keep taking my printer. They say I am not important enough to have one an the one they give me is a floater an I'm lucky to even have it as I really shouldn't an so when ever one is needed elsewhere, they just come an take it when ever they like.

Basically I will come into my office an its just gone, an if I complain I hear things like, first of all..its not your printer...or/an we can take it any time we like an if you don't like it, to bad.

Problem is despite what they say, my job does entails a great need for a printer an does become harder to do when I don't have the one at my desk, an so my idea is to just buy a new one of the exact same model, then they can keep their damn precious printer.

Now we do have networked printers at our place, but this unit has never been on those an I don't think even could. Believe it or not it's a simple $175.00 HP Laser an all it has is a USB port on the back an a Parallel Port, an was always just been plugged directly into my PC directly via the USB plug to work.

So am just wondering, disregarding the need for drivers as they are already on there, if I plug a new version of this printer into my machine, should it just work, is there some kind of addressing that is dif from one printer to another even of the same model, or any other thing that might have to be setup on the machine as its seeing it as a new or some other printer then what I had before?

Should mention that I plug in my Android smart phone an that has never needed any approval as well as my Tablet. Also have plugged in a camera scope device an that worked.

Only thing that has never worked was a temp logging device as that tried to load the software it needed as that is how it works to provide that.

I know for sure there is no way I can put any software or drivers directly onto my machine. Hence part of the reason for getting the same as they can't say I can't do that as the drivers need to be approved.

Anyway, am hoping someone who knows printers better then me can tell me.

Thanks for any help.


My System SpecsSystem Spec
.
10 Jul 2015   #2
DMHolt57

 
 

theoretically it will work if they will let you bring in your own hardware and the driver is already installed on the machine. The only difference would be the serial number.
My System SpecsSystem Spec
10 Jul 2015   #3
Mellon Head

Win 7 Pro x64/Win 10 Pro x64 dual boot
 
 

Every USB device has it's own unique serial number that Windows reads. There is also a product and vendor identifier encoded into the USB hardware. This is what the driver looks at to make sure that it's connecting to the right thing on power up.

Plugging in the same model printer of your own, should work, but be aware that Windows may read the new serial number of the new printer and decide to load/install the drivers again, because it sees the printer as a new device. The drivers are the same ones that you have been using, so there should be no conflict with IT, but you should definitely ask before you do this. Especially if IT won't let the drivers reload.
My System SpecsSystem Spec
.

Reply

 Same model direct USB printer but new, any unique address or other ?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
How do I determine the TCP/IP Address of my printer?
Hello, I would like to communicate with my printer via Quick Basic and I think to talk to it I need to know its address, can anyone tell me how to find this? Thank you
Hardware & Devices
Dell CL Printer model 3000CN will not print test page
This old printer worked wonderful. I would like to re-install it. When I send a test page to it Printer Settings reports One document in Que, Status Printing, but it doesn't print. :( I have connected the printer with a parallel cable and in the printer window it said Ready Standby. :p I...
Hardware & Devices
Obtain Mac Address of USB Printer
I've got a Samsung USB ONLY printer which I need to connect to the USB port of a TP-link N600 Router (this acts as a print server) only thing is I want to reserve the IP address of the printer on the router. For this I need the mac address of the printer. The printer doesn't have the mac address...
Hardware & Devices
HardwareID = MAC address? For MoBo and USB devices? Find out model?
Just to clarify my point of view: The hardwareID is not (never) equal to the MAC address Even not for network cards. is that correct? Is there a way to find out the - vendor - model name for a given hardwareID?
Hardware & Devices
Microsoft Is in a Unique Position to Address Privacy with IE9
Hachamovitch: Microsoft Is in a Unique Position to Address Privacy with IE9 - Softpedia
News
Printer. Can I set up a static IP address ?
I have a Belkin router with the PC plugged into port 1 and my Konica Minolta 2430DL plugged into port 2. The problem I have is that whenever the router restarts (power cut/switch off etc) the router reasigns a different IP to the printer. This means I have to go into printer properties and add a...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:29.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App