Started copying at 138MB/s and now wont copy ANY file anymore more then 2MB/s.
Im analysing defragmentation software now, and while my 2 partitions and 1tb external drives were done in mere seconds, my problematic slow 2,5tb drive is taking 5 minutes already now to analyse.
Best part is that the analyse is on half way and says not a SINGLE block is fragmented.
What can be done?
I would start by running chkdsk and seeing whether it reports any errors.
Here is a guide:
Disk Check
On a big drive like yours, this could take quite a while.
Edit: Removed link to external website - replaced with sevenforums guide.
Last edited by JonM; 16 Aug 2015 at 10:13.
Will that just take a week to tell me its broken or also where and what and how?
Bad experience with windows utilities.
Millions of people use Windows Check Disk without problems.
Here is a tutorial by Brink from the forms Tutorial Section.
Seldom do you have to leave the forum to get a tutorial.
Disk Check
it takes about a minute per file....after being on about 10%....i gave up on this
You might get some info from a third party app for reading the S.M.A.R.T data from your disk.
If it has been reporting errors, it could point to a damaged disk.
I've heard good reports about HD Tune.
Have a look at the "Health" tab and "Error scan" tab.
I tried the free version just now and my 500gb disk took about 2 mins to do a quick scan, so I would expect yours to take approx 10 mins if it's in good health.
right now it is copying with 12MB/s. im making a copy to my new 5tb drive as we speak. i also have a external 1tb drive and copying to my new 5tb drive is going with 10MB'/s.
Whats going on?
something must be wrong with the pc.
Nothing is wrong with the PC. Transferring through USB is always going to be slower.
Quote