Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: USB printer cable not recongized

06 Sep 2015   #11
ghaidaa eldeeb

windows 7 ultimate x64
 
 

Quote   Quote: Originally Posted by torchwood View Post
Cool.
Right so the printers not there, first of all go to the same screen where you made the screenshot,
RIGHT click on all but the One drive printer and remove them.

Install the driver in compatability mode (XP).

Then plug in your printer and goto the "add printer" (top left) select , it should then appear on your screen,
and hopefully It will be working.

If not Right click on the printer select troubleshooter.

Roy
i installed it manually without usb cable but still the main problem that the usb cable when connected printer sometime works and print well and sometime while printing suddenly error msg usb cable not plugged and stopped even the cable plugged already


My System SpecsSystem Spec
.
07 Sep 2015   #12
torchwood

W7 home premium 32bit/W7HP 64bit/w10 tp insider ring
 
 

In that case I'd say you need a new cable.

Roy
My System SpecsSystem Spec
Reply

 USB printer cable not recongized




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Connect printer via crossover cable
I need to connect a printer via crossover cable to a Win7/64 laptop. The printer has a USB port, but it is defective. I created a xover cable (and tested it so I know it's good). How do I set up this printer (HP Deskjet 6940) using the xover cable connected to the ethernet port on the laptop? I...
Hardware & Devices
Printer cable advice - DB25 to USB Type B
Customer has an old accounting software package that is hard coded to print via the DB25 connector on his Desktop PC to a dot matrix printer which has given up the ghost. He does not want to replace the accounting package and so I am thinking I should be able to print from the DB25 port to his...
Hardware & Devices
backup drive with W7 boot file is not recongized after installing SSD
Here is the story, I used to run 2 WD Caviar Black 1TB each, I decided to get a 128gb Intel SSD, put the other 2 WD drives over to SATA port 2 and 3 with SSD on port 1. I did not format the WD drives since they both have data on it, port 2 WD still has W7 installation on it. When I started up...
Hardware & Devices
Can I use a Y-splitter printer cable? Do they work?
I was looking at this cable and I know it doesn't work because the red connector only carries power and no data. Is there a Y-splitter printer cable that will work? I don't want to buy a print router because my workload does not require one and if a y-splitter doesn't work will this hub work?
Hardware & Devices
Installing printer via Ethernet Cable
Silly question maybe but is there anyway to use an ethernet cable to directly connect my printer to my computer or is there no such thing? I have an older printer which has no USB connection. My new computer also does not have the old style printer port which is required for this printer. My...
Hardware & Devices
how to connect printer via ethernet cable with no router
I have a LaserJetprinter with a bad USB port, and I want to connect it directly to my laptop using the ethernet port. Since there is no internet at this location, I have been using the USB port. If I connect the printer directly to my laptop what type of cable do I use (crossover?) and what...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:04.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App