Cannot clone failing hard drive

Page 3 of 3 FirstFirst 123

  1. Posts : 5,656
    Windows 7 Ultimate x64 SP1
       #21

    Sorry, power blackout while replying to you, and then I forgot to later.
      My Computer


  2. Posts : 141
    Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
    Thread Starter
       #22

    cyberSAR said:
    Husaberger said:
    One more question cyber
    As mentioned, I only have 2 motherboard sata slots
    Can I still do what you describe?
    Sure. Failing HDD is probably already on sata 0 so plug 3rd HDD into sata1. Create image of failing drive to 3rd drive. Replace failing drive with new HDD on sata 0. Boot to cd and restore image from sata1 to sata0.

    Note that during restore you'll have the option to copy drive signature. Do so, as some programs use it for licensing activation.

    Also note that if you are using the free WD version of Acronis you will need to have a WD drive always hooked up for it to function.
    Sorry I'm being so dense but I only see the above working if I have 3 Sata slots avail to have the optical drive, 3rd HD and new HD all plugged in at the same time, or am I missing something?
    As you also suggest, I could see using a thumb drive, but I don't have one with that kind of capacity
      My Computer


  3. Posts : 5,656
    Windows 7 Ultimate x64 SP1
       #23

    You can use a USB flash drive for Acronis bootable only?
      My Computer


  4. Posts : 77
    Windows 7 Pro 64-bit
       #24

    Sorry I didn't see this sooner. I thought you had 2 sata slots for HDD. If you only have 2 total you'll have to either use a USB drive or docking station, or a usb cd/dvd-rom, or try imaging and restoring from within windows. Sorry I can't give much help on that as I've never tried restoring from within Windows.

    Just a thought - wonder if you could create a bootable usb acronis disc and use it instead of the bootable cd.
      My Computer


  5. Posts : 5,656
    Windows 7 Ultimate x64 SP1
       #25

    Yes, it is possible (I use Acronis but a paid version, that's why I had the ? at the end, he has to check :)). You just need the ISO and a program like Rufus. You can create the ISO from the CD with imgBurn.
      My Computer


  6. Posts : 7,055
    Windows 7 Home Premium 32 bit
       #26

    Hi Husaberger,

    I would think that it would be best to do a sector to sector cloning of your failing system drive to a good drive connected to the other SATA port. That good drive should have a capacity greater than your system drive.

    Use SystemRescueCd. Download - SystemRescueCd

    See this post on how to do it WD EXTERNAL HARD DISK 1TB suddenly "unallocated" and "not initialized"

    In step 4 in the above post use the following command

    4. Next against the command prompt type:ddrescue -d -f -r3 /dev/sdb /dev/sdc recovery.log [ENTER]
    ( Note: ddrescue[space]-d[space]-f[space]-r3[space]/dev/sdb[space]/dev/sdc[space]recovery.log)

    Note: Replace sdb and sdc with the correct device nomenclature of Source disk(in your case the System disk) and Destination disk ( in your case the other good disk you had plugged into the other SATA port) as obtained in step 3. Make doubly sure.

    If cloning is completed successfully, you can then remove your problematic drive and connect the cloned drive in its place. Your system should boot normally.

    The advantage: If as you think the system drive is having bad sectors and that was resulting in the frequent BSODs ( that is debatable), some or most of the bad sectors would have been recovered. ddrescue not only clones but also tries to recover the data in bad sectors in its second and third passes.( The first scan will clone the good sectors and may finish faster than the second and third pass trying bad sector recovery.)

    A successful ddrescue cloning by dragonballz4 here: External hard disk unaccessible

    And that was based on this: Best method/tool for cloning a failing HDD for Data Recovery?

    Good Luck.
    Last edited by jumanji; 16 Sep 2015 at 09:50.
      My Computer


  7. Posts : 141
    Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
    Thread Starter
       #27

    A big thank you to everyone who provided advice
    I know my situation was complicated by the fact that the machine I was working on had only 2 sata ports
    I ended up getting the Inateck docking station (FD2002) that had been recommended and successfully cloned the failing HDD on the first try :)
    I had never heard of these devices before but I'm believer now that they have succeeded where Macrium did not
    Thank you again for all the help. Hope this helps someone in the future
      My Computer


  8. Posts : 7,055
    Windows 7 Home Premium 32 bit
       #28

    OK, you chose the easy way out by purchasing a speciality standalone cloning dock Inateck docking station (FD2002). its only special feature is that it can clone offline ( without needing a connection to a PC) Most probably you purchased it in Amazon. Have you read the critical reviews on it there or newegg?

    So now you will be replacing the faulty drive with the cloned drive. As a follow-up we would be interested to know how good the cloning was and whether with that cloning all your problems are resolved.

    ( It will depend upon how it dealt with the bad sectors in the faulty drive. If it skipped the bad sectors or just filled it with zeroes, the data in bad sectors is lost. You will know it only when your system groans (a corrupted system file) or some files/software say corrupted and do not open or run.It is for this very reason backup software like Macrium reflect will refuse to clone a disk with bad sectors.A cloned drive with the same bad sectors data in it will behave in the same way as the faulty drive cloned.These are used to clone only good drives so that the clone works flawless..)

    Let us know as and when any of these events occur..
    Last edited by jumanji; 17 Sep 2015 at 13:37.
      My Computer


 
Page 3 of 3 FirstFirst 123

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 02:59.
Find Us