Problem with new computer seeing the hard drive

Page 1 of 2 12 LastLast

  1. Posts : 3
    Windows 7 Ultimate x64
       #1

    Problem with new computer seeing the hard drive


    I have a new Asus M32 desktop running Windows 7 Ultimate x64 with 2 partitions. I was using a program Partition Wizard and I clicked align the partitions, then I couldn't boot up anymore or get into the bios. Removing the hard drive got me into the bios, but I didn't know what to do, so I called support and they said ship it to us and they would try to fix it. I took the hard drive and put it into a seven year old Dell Vostro and it recognized the hard drive. I deleted the partitions, put it back in the Asus and it was recognized again and all is fine. Why did align the partitions cause this to happen? Could this have been corrected within my Asus without removing the hard drive and using another computer? Thank you.
      My Computer


  2. Posts : 543
    Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
       #2

    I can't say if you could have done anything on the new machine to correct the hard drive problemm, not enough info here. I would ask why you are messing with partitions on a new PC? You probably have/had 2 parts for the primary C: is your os and the 2nd part is probably D: and would likely be a recovery/backup image part. What is your goal here?
      My Computer


  3. Posts : 3
    Windows 7 Ultimate x64
    Thread Starter
       #3

    The machine came with Windows 8. I formatted and made 2 partitions. Windows 7 on the first and Windows 10 on the second. There was also a small 100mb partition that windows must have made before Windows 7. Everything was running fine until a few weeks later. I clicked within the partition wizard software "align the partitions". I thought it would make my computer run even better. After I clicked, it said to reboot, and then the computer wouldn't recognize the hard drive anymore. It was stuck on the Asus splash screen. Just wondering what I did wrong and glad I had an old computer to fix the mess I made.
      My Computer


  4. Posts : 543
    Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
       #4

    I would recommend you start using a non-essential computer for learning/experimenting purposes and always have a hard drive clone sitting on the shelf before diving into such activities. That way you always have a sure fire way of a quick recovery method. Good that you are curious, just don't get crazy on your nice new computer.
      My Computer


  5. Posts : 6,330
    Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64 +Linux_VMs +Chromium_VM
       #5

    Reading post #3 i'm not sure sure what you did to buy a PC that came with 8.1, and what you did to get Win 7 and Win 10 on it
    You probably could have done a Startup Repair to fix the boot problem.
    Startup Repair

    i.e.
    Did you upgrade the 8.1 to Win10 with the free upgrade offer ?
    And then install Win 7 Ultimate ?
    Win 7 won't understand the W8.1 or W10 Boot Manager and be able to update it correctly.

    If Startup Repair doesn't fix your issue, you might need to manually rebuild the BCD Store.

    When you install multiple OS's on a PC, the oldest OS should be installed first, and newer OS's installed after that in the order they were released.

    I believe the Align you did corrupted the Boot Manager (aka Bootloader/BCD Store).
    I've done this to myself several times over the years, and Startup Repair always worked for me.
    Any time I Install OS/Upgrade OS/Move/Align/Resize partitons, it can cause boot problems.
    I always make full backups of EVERYTHING before making such changes, so i can easily recover.

    Best to do as cyclops suggested, and learn on a TEST box with a "clone" drive available for recovery.

    You could also post a screen print of Disk Management if you want more help with what you want to do.
    Disk Management - Post a Screen Capture Image
      My Computer


  6. Posts : 13,576
    Windows 10 Pro x64
       #6

    We would have told you to run a few commands in Diskpart to see if the disk even needed to be aligned.

    Next time don`t be so foolish.

    The offset on the 1st partition on the selected drive has to be divisable by 4 at the KB level, that`s it. Simple.

    If not, THEN you use a tool like a Partition Wizard Boot CD or Diskpart booting from the Install DVD to correct the alignment.
    Attached Thumbnails Attached Thumbnails Problem with new computer seeing the hard drive-capture.jpg  
      My Computer


  7. Posts : 2,774
    Windows 7 Professional 64-bit
       #7

    Hey guys, I want to learn -- what is and why for: Align the Partitions? This is the first time I've seen that phrase.
      My Computer


  8. Posts : 3
    Windows 7 Ultimate x64
    Thread Starter
       #8

    Here is a screen print from my Disk Management taken from Windows 7 partition. To go into Windows 10 I click on Pqboot on the desktop. To get back to Windows 7 I click on Pqboot in Windows 10. Is Pqboot the right way to switch? I found it during a Google search.
    Attached Thumbnails Attached Thumbnails Problem with new computer seeing the hard drive-2.jpg  
      My Computer


  9. Posts : 6,330
    Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64 +Linux_VMs +Chromium_VM
       #9

    RolandJS said:
    Hey guys, I want to learn -- what is and why for: Align the Partitions? This is the first time I've seen that phrase.
    See this tutorial by whs:
    SSD Alignment
      My Computer


  10. Posts : 25,847
    Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64
       #10

    When I tinker with more than one operating system I do it the safest way I know how.

    Each new operating system gets it's own Drive (disk)(ssd).

    When I boot I select which system to boot into.
    If I screw up one of the operating system it doesn't effect the others.
    Just boot into the working operating system and format or repair the one I screwed up.
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 16:49.
Find Us